Compare commits

...

651 Commits
2452 ... 2829

Author SHA1 Message Date
paweldomas
7186a9c79c fix(base/participants): ensure default local id outside of conference
Makes sure that whenever a conference is left or switched, the local
participant's id will be equal to the default value.

The problem fixed by this commit is a situation where the local
participant may end up sharing the same ID with it's "ghost" when
rejoining a disconnected conference. The most important and easiest to
hit case is when the conference is left after the CONFERENCE_FAILED
event.

Another rare and harder to encounter in the real world issue is
where CONFERENCE_LEFT may come with the delay due to it's asynchronous
nature. The step by step scenario is as follows: trying to leave a
conference, but the network is not doing well, so it takes time,
requests are timing out. After getting back to the welcome page the
the CONFERENCE_LEFT has not arrived yet. The same conference is joined
again and the load config may timeout, but it will be read from the
cache. Now the network gets better and conference is joining which
results in our ghost participant added to the redux state. At this point
there's the root issue: two participants with the same id, because the
local one was neither cleared nor set to the new one yet
(PARTICIPANT_JOINED come, before CONFERENCE_JOINED where we adjust the
id). Then comes CONFERENCE_JOINED and we try to update our local id.
We're updating the ID of both ghost and local participant. It could be
also that the delayed CONFERENCE_LEFT comes for the old conference, but
it's too late and it would update the id for both participants.

The approach here reasons that the ID of the local participant
may be reset as soon as the local participant and, respectively, her ID
is no longer involved in a recoverable JitsiConference of interest to
the user and, consequently, the app.

Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
2018-05-29 13:44:06 +02:00
Lyubo Marinov
c672ffd435 Refine PARTICIPANT_LEFT for ID collisions
If the ID of a remote participant was the same as the ID of the local
participant (across multiple conferences), removing the remote
participant on PARTICIPANT_LEFT would remove the local participant.

Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.
2018-05-29 12:24:39 +02:00
Lyubo Marinov
8cfc83f18c Protect against late PARTICIPANT_JOINED
Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.

If a leave is delayed and the leaving JitsiConference manages to sneak a
PARTICIPANT_JOINED in, it may create a remote participant who even
collides with the local participant.
2018-05-29 12:24:39 +02:00
Lyubo Marinov
fa9549582f Fix JitsiConference access
With so many abstractions called conference, I'm not surprised I made a
mistake and my reviewer didn't catch it.

As we are transitioning from remote participants identified by ID alone
to an ID-conference pair, the subsequent commits "Protect against late
PARTICIPANT_JOINED" and "Refine PARTICIPANT_LEFT for ID collisions"
caught the error.
2018-05-29 12:24:39 +02:00
paweldomas
11b7144ad0 ref(base/conference): clear the 'conference' field on WILL_LEAVE
Pawel Domas said:
The conference state field is referring to the current conference in
progress, so it feels like this field should be cleared as soon as we
declare that the conference is being left and the asynchronous process
of leaving the conference starts (which happens on
CONFERENCE_WILL_LEAVE).

Lyubo Marinov said:
Merely setting conference to undefined is incomplete because there are
other redux state properties associated with conference.

What we're doing here is redefining the redux action
CONFERENCE_WILL_LEAVE:

The redux action CONFERENCE_WILL_LEAVE represents the order of the user
to leave a JitsiConference instance. From the user's perspective, there's
no going back (with respect to the instance itself). The app will perform
due clean-up like leaving the associated room, but the instance is no
longer the focus of the attention of the user and, consequently, the app.

Now CONFERENCE_LEFT and CONFERENCE_WILL_LEAVE have more in common than
before and we can do a much better job by expressing the common parts in
source code. Additionally, our source code can be rewritten to better
express the meaning of any of these two actions.

Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
2018-05-29 12:24:39 +02:00
Lyubo Marinov
92fee790f2 Fix jsdoc 2018-05-28 18:54:11 -05:00
Daniel Ornelas
72487fa7c7 [iOS] Custom CallKit display name
Add ability to provide a display name in the configOverwrite object that
when available it will be used to customize the name of the meeting in
callkit screen and recent call list.

Co-authored-by: Daniel Ornelas <daniel.ob64@gmail.com>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
2018-05-28 18:53:48 -05:00
paweldomas
380909371f fix(AudioMuteButton): ensure track on unmute
If "startWithAudioMuted" option is used we need to make sure that new
local audio track will be created on unmute.
2018-05-27 15:07:23 -05:00
virtuacoplenny
d4d5ef202a ref(small-video): use css to set component visibility (#3039) 2018-05-25 13:19:51 -07:00
Bettenbuk Zoltan
c95cb0e9cf [RN] Disable filmstrip separation on Android
This zOrder change fixes the issue that the scrollable filmstrip videos
rendered in front of the local participant, however there is still an
issue that needs to be fixed later: The rendered videos should have
overflow: 'hidden' property applied so then they don't get rendered when
scrolled out of the ScrollView, that property however doesn't seem to
work for Video components.
2018-05-25 09:21:26 -05:00
Jacob MacElroy
9e2a101089 Changing the status strings for call flows to be lowercased where possible.
This should allow us to have a consistent convention and assist
with client translation of status strings.
2018-05-24 10:49:31 -05:00
Saúl Ibarra Corretgé
c8c198b0b1 [Android] Add support for USB headset detection
The API to gather these was introduced in API level 26.
2018-05-24 16:40:11 +02:00
Daniel Ornelas
4bb6e5aefd Implement a delegate of PiPViewCoordinator to notify when user exits Picture in Picture mode 2018-05-23 17:56:16 -05:00
hristoterezov
3dbb663922 feat(call-flows): Add config property for enabling call flows. (#3031) 2018-05-23 14:52:44 -07:00
Lyubo Marinov
592305df74 [RN] Fix processing outdated loadConfig requests (continued)
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
Co-authored-by: Paweł Domas <pawel.domas@jitsi.org>
2018-05-23 16:48:23 -05:00
Saúl Ibarra Corretgé
357b206831 [RN] Fix processing outdated loadConfig requests
This fix is based on storing the location URL object we are loading the
configuration for in the redux store. Once the config has been loaded (or it has
failed, for that matter!) we'll check if the current "config URL" is the same we
set, and discard the old one if they don't match.
2018-05-23 16:48:23 -05:00
Saúl Ibarra Corretgé
d557a6505d [RN] Fix handling XMPP connection failures
After the connection is established, it can either be properly disconnected or
fail. We need to make sure to be listening for events for either.
2018-05-23 16:37:58 -05:00
hristoterezov
f12ba37cf3 fix(presence-status): Use lower case for call flow related statuses. 2018-05-23 15:22:01 -05:00
hristoterezov
d4d2c25499 [RN] Add rejected ringtone sound assets to build 2018-05-23 15:22:01 -05:00
hristoterezov
8b91afd80d fix(invite-sounds): Don't play joined sound for the poltergeist. 2018-05-23 15:22:01 -05:00
hristoterezov
d89227829f feat(invite-sounds): Add expired and rejected sounds. 2018-05-23 15:22:01 -05:00
hristoterezov
2b1c875b91 feat(presence-status): Add more statuses. 2018-05-23 15:22:01 -05:00
Дамян Минков
5b4a16cf6b Updates lib-jitsi-meet that uses strophe.js 1.2.15. (#3020) 2018-05-23 11:08:47 -07:00
Zoltan Bettenbuk
480fe53001 Merge pull request #3009 from jitsi/state-listener
[RN] Prevent multiplying remote thumbnails
2018-05-23 18:48:16 +02:00
Lyubo Marinov
2ecacf6c3e [RN] Fix a "TypeError: Cannot read property handlers of undefined" in ImageCache
With some of the preceding commits in the "multiplying remote
thumbnails" story line, I started hitting this error with 100%
reproducibility:

1. Have a remote participant prepared in conferenceA. Web will do as
well.
2. On iOS prepare to join conferenceB in Safari and use the same device
for step 3.
3. Join conferenceA on the iOS device from step 2 with audio-only. The
audio-only is so that avatars are always visible. Wait for the remote
participant prepared in step 1 to appear.
4. Switch to Safari and hit "Continue in the app" to have the app leave
conferenceA and join conferenceB.

What happens:
After the iOS device joins conferenceB in the Jitsi Meet app, the local
participant is on the large video (as expected) but the avatar of the
local participant is the default audo-generated auto-colored
placeholder. That's because this error was hit and the avatar couldn't
be "fetched".
2018-05-23 10:26:59 -05:00
Lyubo Marinov
ee9fcbb735 Remove remote participants who are no longer of interest
The Jitsi Meet app always has at most 1 conference of primary interest.
It may have to juggle with 2 JitsiConference instances at the same time
if 1 is in the process of being left and one is joining/joined. But the
one which is joining or joined (which we call conference in the
features/base/conference redux state) is the one "of interest", the
other one is "clean up". Consequently, the remote participants of the
conference "of interest" are the remote participants "of interest" and
the others are "clean up". In order to reduce the time during which
there may be multiplying remote thumbnails, clean the remote
participants who are no longer "of interest" up.
2018-05-23 09:46:15 -05:00
Lyubo Marinov
db21e97c19 StateListenerRegistry
"Middleware" redux state changes, not actions.
2018-05-23 09:46:15 -05:00
Lyubo Marinov
8cd2bd272b Reduce direct read access to the features/base/participants redux state
As part of the work on fixing the problem with the multiplying
thumbnails, we've associated remote participant w/ JitsiConference.
However, there are periods of time when multiple JitsiConferences are in
the redux state (and that period is going to be shorted by
StateListenerRegistry). In order to give more control to the feature
base/participants, reduce the occurrences of direct access to the
features/base/participants redux state and utilize the feature's
existing read access functions. Which will allow us in the future to
enhance these functions to access participants which are relevant to the
current conference of interest to the user only.
2018-05-23 09:46:15 -05:00
Lyubo Marinov
771d60f954 Associate remote participant w/ JitsiConference (_UPDATED)
The commit message of "Associate remote participant w/ JitsiConference
(_JOINED)" explains the motivation for this commit.

Practically, _JOINED and _LEFT combined with "Remove remote participants
who are no longer of interest" should alleviate the problem with
multiplying remote participants to an acceptable level of annoyance.

Technically though, a remote participant cannot be identified by an ID
only. The ID is (somewhat) "unique" in the context of a single
JitsiConference instance. So in order to not have to scratch our heads
over an obscure corner, racing case, it's better to always identify
remote participants by the pair id-conference. Unfortunately, that's a
bit of a high order given the existing source code. So I've implemented
the cases which are the easiest so that new source code written with
participantUpdated is more likely to identify a remote participant with
the pair id-conference.

Additionally, the commit "Reduce direct read access to the
features/base/participants redux state" brings more control back to the
functions of the feature base/participants so that one day we can (if we
choose to) do something like, for example:

If getParticipants is called with a conference, it returns the
participants from features/base/participants who are associated with the
specified conference. If no conference is specified in the function
call, then default to the conference which is the primary focus of the
app at the time of the function call. Added to the above, this should
allow us to further reduce the cases in which we're identifying remote
participants by id only and get us even closer to a more "predictable"
behavior in corner, racing cases.
2018-05-23 09:46:15 -05:00
Lyubo Marinov
37cd5bb5b9 Associate remote participant w/ JitsiConference (_LEFT)
The commit message of "Associate remote participant w/ JitsiConference
(_JOINED)" explains the motivation for this commit.
2018-05-23 09:46:15 -05:00
Lyubo Marinov
983e62ffe9 Associate remote participant w/ JitsiConference (_JOINED)
The plan set in motion here is to associate remote participants with the
JitsiConference instances that created them in order to be able to
remove remote participants when a JitsiConference is no longer the
primary focus of the jitsi-meet app. And that's supposed to alleviate a
problem with multiplying remote thumbnails.

Doing all of the above in a single commit is a bit of a high order. So
I'm splitting the whole into multiple successive commits for the
purposes of observability, comprehension. Each commit is supposed to be
safe even if subsequent commits are not accepted, are reverted,
whatever. Obviously, without the successive commits, a commit may be
"unused".

One of the important pieces of the multiplying remote thumbnails "fix"
offered is removing remote participants who are no longer of interest
i.e. PARTICIPANT_LEFT. But in order for _LEFT to be implemented, _JOINED
must be implemented first.
2018-05-23 09:44:26 -05:00
Lyubo Marinov
fcca15c827 Coding style 2018-05-23 08:48:13 -05:00
Lyubo Marinov
6b3da4a4a4 redux 4.0.0, react-redux 5.0.7 2018-05-23 08:48:13 -05:00
Zoltan Bettenbuk
8ecd6e6ced Merge pull request #3028 from saghul/rn-improve-styles
[RN] Simplify absolute fill styles
2018-05-23 15:28:07 +02:00
Saúl Ibarra Corretgé
f7c4133fb7 [RN] Use a SafeAreaView for OverlayFrame 2018-05-23 14:30:42 +02:00
Saúl Ibarra Corretgé
bbb1dce42a [RN] Simplify styles which fill the parent view
Turns out React Native offers an object with the following definition:

{
    bottom: 0,
    left: 0,
    position: 'absolute',
    right: 0,
    top: 0
}
2018-05-23 14:30:22 +02:00
Zoltan Bettenbuk
31864b95ab Merge pull request #3005 from saghul/fix-ios-dev-debug
[iOS] Fix running in Debug mode on a device
2018-05-23 12:36:22 +02:00
Zoltan Bettenbuk
33a748b569 Merge pull request #3013 from saghul/toolbox-disabled-button
[RN] Toolbox disabled button styles
2018-05-23 12:02:49 +02:00
Saúl Ibarra Corretgé
83ede66037 feat(toolbox): add disabledStyles to AbstractButton
It allows for specifying an override style collection which is applied when the
button is disabled.
2018-05-23 11:14:42 +02:00
Saúl Ibarra Corretgé
2128c84212 [RN] Add utility function to combine 2 sets of styles 2018-05-23 10:03:58 +02:00
Zoltan Bettenbuk
a72463a302 Merge pull request #3014 from saghul/toolbox-toggled-labels
[RN] Toolbox toggled item labels
2018-05-22 21:00:32 +02:00
Zoltan Bettenbuk
62cc44f791 Merge pull request #3012 from saghul/overflow-menu-dismiss
[RN] Dismiss OverflowMenu after selecting an option
2018-05-22 17:57:23 +02:00
Saúl Ibarra Corretgé
b4c95bec39 [RN] Adjust button labels to reflext the actual state 2018-05-22 12:02:05 +02:00
Saúl Ibarra Corretgé
7012c77fe9 feat(toolbox): add ability to specify a toggled label on AbstractButton 2018-05-22 12:01:00 +02:00
Saúl Ibarra Corretgé
a8b1ca38dc [RN] Dismiss OverflowMenu after selecting an option 2018-05-22 11:33:03 +02:00
Saúl Ibarra Corretgé
99b5a41269 feat(toolbox): add ability to run a handler after click to AbstractButton 2018-05-22 11:32:09 +02:00
virtuacoplenny
f608ad4e5e feat(toolbar): add beta tag to live streaming button (#3007)
* feat(toolbar): add beta tag to live streaming button

* tweak colors and border radius
2018-05-21 15:16:38 -07:00
Saúl Ibarra Corretgé
0d81e677bf [iOS] Fix running in Debug mode on a device
Thsi fixed a regression in 8f75c2e279

The bundler script doesn't do anything (it literally exits right at the top)
when skipping the bundle. This is arguably wrong, because it doesn't generate
"ip.txt", the file with the bundler IP address either!

So, generate that ourselves. While ding this, also drop the need for xip.io,
which has also been removed from RN, since it gives more trouble than it solves.
2018-05-21 14:05:58 +02:00
Lyubo Marinov
22ce001f14 Coding style: commends, formatting, sorting order 2018-05-20 22:58:34 -05:00
paweldomas
9650404099 fix(base/conference): leave a failed conference
Because a conference can fail before or after it's joined it must be
"left" in order to release any allocated resources like peerconnections,
tracks and all the other things.
2018-05-20 21:23:25 -05:00
paweldomas
7704809c4c feat(base/connection): log leave failure reason
Because there are multiple reasons on why a conference.leave() may fail
it's helpful to know if and why it happened.
2018-05-20 21:17:36 -05:00
Lyubo Marinov
75c7cfd9e1 Coding style: comments, formatting, sorting order 2018-05-20 19:01:59 -05:00
Saúl Ibarra Corretgé
ef7fb1a7b0 [RN] Make all delegate / listener methods run in the main / UI thread 2018-05-20 16:46:44 -05:00
Lyubo Marinov
ccbf3efa38 Coding style: comments, sorting order 2018-05-18 15:36:43 -05:00
Saúl Ibarra Corretgé
39e46bacf6 [RN] Avoid Toolbox changing size on first render
Wait until the right button size has been calculated before rendering it.
2018-05-18 15:36:43 -05:00
Leonard Kim
12d7ab9026 ref(layout): use css to make video layout containers fit window
Instead of using JS, just use CSS 100% width and height. This
also resolves a jitter that occurs on edge when a modal's
container appends to the body.
2018-05-18 15:34:40 -05:00
hristoterezov
9131d2448d ref(i18next): Remove the base/config dependancy. 2018-05-18 13:34:08 -05:00
Saúl Ibarra Corretgé
44c498a566 [RN] Adjust toolbar button sizes / margins
- add 10px of padding on the sizes of the toolbar
- make the button margin smaller (from 10 to 7)
- increate the secondary button factor to 85%, thus rising the maximum secondary
  button size to 50 (from the previous 48)
2018-05-18 13:19:17 -05:00
Zoltan Bettenbuk
192f1d44f5 [RN] Add unlock room function to mobile 2018-05-18 13:18:24 -05:00
Zoltan Bettenbuk
b57dad576a feat(participants): add isLocalParticipantModerator utility method 2018-05-18 13:18:24 -05:00
Saúl Ibarra Corretgé
494e8eb8d9 [RN] Set the local user ID on CONFERENCE_WILL_JOIN
Doing so in CONFERENCE_JOINED is too late because if we are moderators that
event will come first and we won't know what ID to match it with.

This is safe because our local ID is created early.
2018-05-18 13:18:24 -05:00
Lyubo Marinov
21c1e4abc4 Coding style: formatting, comments 2018-05-18 08:58:08 -05:00
Saúl Ibarra Corretgé
5bd975e3f3 [RN] Show / hide the toolbox based on the participant count
Show it if we are the only participant, and hide it the moment someone else
joins the conference.
2018-05-18 08:07:34 -05:00
Saúl Ibarra Corretgé
8f75c2e279 [iOS] Don't bundle the React resources in Debug mode
It significantly speeds up debug builds, putting them on par with Android, where
we also don't bundle the React resources.
2018-05-18 14:36:03 +02:00
hristoterezov
add89e2488 fix(dial-in-info): Qiuck fix of JitsiMeetJS undefined error. 2018-05-17 15:07:03 -05:00
Saúl Ibarra Corretgé
284d09eae7 [RN] Add ringtone sound assets to build 2018-05-17 08:31:46 -05:00
Bettenbuk Zoltan
180141cefb [RN] Fix ios audio issue with locked rooms 2018-05-17 10:43:48 +02:00
Lyubo Marinov
df8eb36d0e Coding style: comments 2018-05-16 16:49:03 -05:00
Saúl Ibarra Corretgé
f54f5df428 [RN] Implement a new UI for the Toolbox
- 5 buttons in the (now single) toolbar
- Overflow menu in the form of a BottomSheet
- Filmstrip on the right when in wide mode
2018-05-16 12:18:38 -05:00
hristoterezov
c344a83376 Outgoing call ringtones (#2949)
* fix(PresenceLabel): Use translated strings for the presence label.

* feat(sounds): Implements loop and stop functionality.

* feat(invite): Add ringtones.

* fix(invite): Code style issues.
2018-05-16 11:03:10 -04:00
virtuacoplenny
ee74f11c3d feat(recording): frontend logic can support live streaming and recording (#2952)
* feat(recording): frontend logic can support live streaming and recording

Instead of either live streaming or recording, now both can live together. The
changes to facilitate such include the following:
- Killing the state storing in Recording.js. Instead state is stored in the lib
  and updated in redux for labels to display the necessary state updates.
- Creating a new container, Labels, for recording labels. Previously labels were
  manually created and positioned. The container can create a reasonable number
  of labels and only the container itself needs to be positioned with CSS. The
  VideoQualityLabel has been shoved into the container as well because it moves
  along with the recording labels.
- The action for updating recording state has been modified to enable updating
  an array of recording sessions to support having multiple sessions.
- Confirmation dialogs for stopping and starting a file recording session have
  been created, as they previously were jquery modals opened by Recording.js.
- Toolbox.web displays live streaming and recording buttons based on
  configuration instead of recording availability.
- VideoQualityLabel and RecordingLabel have been simplified to remove any
  positioning logic, as the Labels container handles such.
- Previous recording state update logic has been moved into the RecordingLabel
  component. Each RecordingLabel is in charge of displaying state for a
  recording session. The display UX has been left alone.
- Sipgw availability is no longer broadcast so remove logic depending on its
  state. Some moving around of code was necessary to get around linting errors
  about the existing code being too deeply nested (even though I didn't touch
  it).

* work around lib-jitsi-meet circular dependency issues

* refactor labels to use html base

* pass in translation keys to video quality label

* add video quality classnames for torture tests

* break up, rearrange recorder session update listener

* add comment about disabling startup resize animation

* rename session to sessionData

* chore(deps): update to latest lib for recording changes
2018-05-16 07:00:16 -07:00
Zoltan Bettenbuk
5fd0f95a89 Merge pull request #2976 from saghul/bottom-sheet-orientation
[RN] Support landscape and portrait orientations in BottomSheet
2018-05-16 10:28:41 +02:00
Zoltan Bettenbuk
0d1d0d06a4 Merge pull request #2977 from saghul/dialog-modal-orientation
[RN] Support landscape and portrait orientations in Dialog
2018-05-16 10:28:28 +02:00
Mark Madlangbayan
b037e1d736 Updated nodejs requirement 2018-05-16 09:48:47 +02:00
Saúl Ibarra Corretgé
bce2438471 feat(toolbox): rename label / tooltip getters in ToolboxItem 2018-05-15 14:12:39 -05:00
Saúl Ibarra Corretgé
8a160fd9ab feat(toolbox): fix ToggleCameraButton tooltip / label 2018-05-15 14:12:39 -05:00
Saúl Ibarra Corretgé
cd57477b68 feat(toolbox): restore emitting UI events for legacy code 2018-05-15 14:12:39 -05:00
Lyubo Marinov
f1123a8cdd Restore the audio and video mute/unmute keyboard shortcuts
I don't think it's realistic that we'd merge a PR that breaks the most
important shortcuts of the app (in my opinion): audio and video
mute/unmute.
2018-05-15 14:12:39 -05:00
Lyubo Marinov
447035c8b2 Coding style 2018-05-15 14:12:39 -05:00
Lyubo Marinov
7fe421aeba Removes unnecessary source code 2018-05-15 14:12:38 -05:00
Lyubo Marinov
3aff4967f1 Keep buttons in their associated features
Contributing all buttons in one place goes against the designs that we
set out at the beginning of the project's rewrite and that multiple of
us have been following since then.
2018-05-15 14:12:38 -05:00
Lyubo Marinov
a42496ba53 Coding style 2018-05-15 14:12:38 -05:00
Saúl Ibarra Corretgé
9ca7ca9515 feat(toolbox): move visibleButtons to redux
Technically we still depend on interfaceConfig, but this paves the way for when
that is no longer the case.
2018-05-15 14:12:38 -05:00
Saúl Ibarra Corretgé
9a3effe97a feat(toolbox): move OverflowMenu show logic to redux 2018-05-15 14:12:38 -05:00
Saúl Ibarra Corretgé
a2834a2495 [RN] Refactor Toolbox
Create standalone components for each feature and move all state to them.
Toolbars are now dummy containers.
2018-05-15 14:12:38 -05:00
Saúl Ibarra Corretgé
450400b768 feat(filmstrip): refactor filmstrip only toolbar
- Move the toolbar to the filmstrip feature
- Use all the buttons from the toolbox feature
2018-05-15 14:12:38 -05:00
Saúl Ibarra Corretgé
c7d72ee3f6 feat(toolbox): create SettingsButton
Only on web, since there is currently no equivalent on mobile. It encapsulates
all funcionality related to opening the settings dialog / panel.
2018-05-15 14:12:38 -05:00
Saúl Ibarra Corretgé
01cb4ac7c8 feat(alwaysontop): refactor toolbox
Use the new abstractions, which already take care of the rendering part.
2018-05-15 14:12:38 -05:00
Saúl Ibarra Corretgé
b634f6b200 feat(toolbox): implement buttons using ToolboxItem
Currently the following are implemented:

- AudioMuteButton
- HangupButton
- VideoMuteButton

In order to implement these new buttons a new abstract class was introduced,
which abstracts the ToolboxItem into a button with enough hooks so a stateful
and a stateless version of it can be created.

This patch only adds the stateful implementation of the aforementioned buttons.
2018-05-15 14:12:38 -05:00
Saúl Ibarra Corretgé
8d94cc5cb2 feat(toolbox): introduce ToolboxItem
This abstraction represents an action which can go anywhere in a toolbox (be
that the main toolbar or the overflow menu) and it's platform independent.

It does not depend on Redux, thus making it stateless, which facilitates its use
in stateful button implementations as well as stateless ones.
2018-05-15 14:12:38 -05:00
Saúl Ibarra Corretgé
52da5010cc [Android] Make sure we use the react-native version in node_modules
Releases are also published to jcenter, and due to how the dependency is
declared, we are picking the latest release from there, which is arguably not
what we want.
2018-05-15 13:48:34 -05:00
Saúl Ibarra Corretgé
362486cbea deps: update react-native-locale-detector
Includes a fix for compatibility with RN >= 0.47.
2018-05-15 13:48:34 -05:00
Saúl Ibarra Corretgé
eea6af51db [RN] Support landscape and portrait orientations in Dialog 2018-05-15 17:55:33 +02:00
Bettenbuk Zoltan
df7b8e51fc [RN] Improve video switch style and remove react warning 2018-05-15 17:42:54 +02:00
Lyubo Marinov
f64b511682 Fix "objc[59448]: Cannot form weak reference to instance (0x60c000039440) of class RNCallKit. It is possible that this object was over-released, or is in the process of deallocation." 2018-05-15 17:29:20 +02:00
Saúl Ibarra Corretgé
c6f99f3dda [RN] Support landscape and portrait orientations in BottomSheet
One has to be explicit on iOS, otherwise it seems to be locked to portrait only.
2018-05-15 17:12:40 +02:00
Lyubo Marinov
75fe3e3b9d [RN] If base/config knows a domain, then the app knows it
Knowledge is power, man!

The config.js cache predates the feature base/known-domains.
Technically, it's also able to recall more domains that the feature
recent-list can (because the latter limits its entries).
2018-05-14 16:33:02 -05:00
Lyubo Marinov
631f51d627 [RN] Legacy support of calendar-sync's knownDomains
Knowledge is power, man!

We moved "knownDomains" from calendar-sync to base/known-domains.
However, we do have an official release in the app stores and I'd like
us to not throw away the knowledge it has acquired.
2018-05-14 16:32:30 -05:00
Lyubo Marinov
d4dea22576 [RN] If recent-list knows a domain, then the app knows it 2018-05-14 16:32:19 -05:00
Lyubo Marinov
5e8ecc5fee Coding style: naming, comments 2018-05-14 16:31:47 -05:00
Zoltan Bettenbuk
46bc63b79e [RN] If calendar-sync knows a domain, then the app knows it 2018-05-14 16:28:38 -05:00
Zoltan Bettenbuk
ee94d79ee6 [RN] Add known-domains feature 2018-05-14 16:27:48 -05:00
Aaron van Meerten
1ba564f49c Merge pull request #2966 from jmacelroy/call-response
Adding cancel to mod_muc_call
2018-05-14 12:31:58 -05:00
Leonard Kim
e649ae9016 fix(toolbar): show profile button if guest
If authenticated using JWT, don't show the profile button but
do show it if a guest.
2018-05-14 13:05:24 -04:00
Jacob MacElroy
f60559fb67 Adding cancel to mod_muc_call 2018-05-14 16:34:37 +00:00
hristoterezov
39ba83131b fix(ga): Change the cookieDomain parameter to 'auto'. (#2954) 2018-05-11 08:32:02 -07:00
Paweł Domas
b2ad8a95d4 fix(ios,build-ipa.sh): lib-jitsi-meet package sed escape (#2953)
It needs to be global and the old replace seems to escape only the first
occurrence.
2018-05-10 12:46:34 -07:00
Zoltan Bettenbuk
b797b0b201 Merge pull request #2946 from jitsi/fix-app-props-typeerror
[Android] Fix possible TypeError in multi-JitsiMeetView SDK consumers
2018-05-10 12:40:11 +02:00
Lyubo Marinov
bd7c9473e7 [Android] Fix possible TypeError in multi-JitsiMeetView SDK consumers
If multiple JitsiMeetView instances are created (not necessarily
existing at once), it's possible to hit a TypeError when reading the
React Component props of the currently mounted App. Anyway, in certain
places we're already protecting against that out of abundance of caution
so it makes no sense to not protect everywhere.
2018-05-09 23:45:24 -05:00
hristoterezov
53971d0b50 feat(DeepLinkingMobilePage): Add dynamic links support. 2018-05-09 09:16:02 -05:00
Zoltan Bettenbuk
44a65eb329 Move local participant join to base/participants 2018-05-09 15:20:22 +02:00
zbettenbuk
cc7e15ab8f Fix accidental overwrite of localParticipant with empty values 2018-05-09 15:20:22 +02:00
zbettenbuk
959db3a665 Make web use the redux settings/profile 2018-05-09 15:20:22 +02:00
Zoltan Bettenbuk
ab7e572162 Merge pull request #2932 from saghul/refactor-bottomsheet
[RN] Refactor SimpleBottomSheet
2018-05-09 10:59:34 +02:00
Saúl Ibarra Corretgé
4fdd71d1bd [RN] Refactor SimpleBottomSheet
Make it more generic by accepting any content except of just rows with text and
icons.

In addition, rework its structure so the animation is smoother, by putting the
background overlay outside of the Modal. This way, the animation doesn't affect
the background, which won't slide down.
2018-05-08 22:25:25 +02:00
paweldomas
8f5ec20da8 fix(.travis.yml): xcode9.3 2018-05-08 10:38:17 -05:00
paweldomas
740817fdcf chmod +x on build-ipa.sh 2018-05-07 17:04:40 -05:00
paweldomas
8ca836c922 feat(iOS): build .ipa for PRs in Travis CI 2018-05-07 15:31:23 -05:00
Lyubo Marinov
6a0de0ddde Coding style: consistency, formatting, naming 2018-05-07 10:05:37 -05:00
zbettenbuk
b777322fdc [RN] Make the audio-video labels touchable 2018-05-07 10:05:22 -05:00
zbettenbuk
0826ffa974 [RN] Increase header height 2018-05-07 10:05:06 -05:00
hristoterezov
6aae56527f fix(web_ios): Not rendering when the browser back button is pressed. 2018-05-07 15:26:19 +02:00
Lyubo Marinov
7ffdaf59c7 [RN] Add an example how to consume the public SDK invite API 2018-05-07 00:38:49 -05:00
Lyubo Marinov
85612b9ae1 [iOS] Namespace the public API of the feature invite 2018-05-06 22:42:32 -05:00
Daniel Ornelas
529e5e8938 [iOS] Fix nullability warnings/errors caused by the feature invite 2018-05-06 22:41:45 -05:00
hristoterezov
bcd9163284 chore(package.json): Update lib-jitsi-meet version. 2018-05-04 17:05:54 -05:00
virtuacoplenny
d62ac72cfa Various pixel pushing, tooltip copy changes (#2918)
* fix(toolbar): make button hover bigger

* fix(toolbar): make hangup button bigger

* fix(always-on-top): make toolbar and buttons same sizes as main toolbar

* fix(toolbar): change some tooltips

* fix(toolbar): adjust side panel and filmstrip for new toolbar sizes
2018-05-04 13:10:48 -07:00
Saúl Ibarra Corretgé
8656c7e760 doc: add a badge / link to the latest stable release 2018-05-04 07:49:55 -05:00
paweldomas
a9ee5944e1 ref(base/connection): conferenceFailed error argument
Introduce ConnectionFailedError type.
2018-05-04 13:02:19 +02:00
paweldomas
36ecc99b5b fix(auth/external API): CONFERENCE_FAILED with login dialog
Delay the CONFERENCE_FAILED event until the user cancels the login
dialog using the 'recoverable' event flag.
2018-05-04 13:02:19 +02:00
paweldomas
82f5eb894b ref(external API): emit CONFERENCE_FAILED on CONNECTION_FAILED
It seems that the external API will not send any event to let the sdk
consumer know that the conference has failed if the problem occurs at
the establishing of XMPP connection stage. That's because the config was
loaded successfully, but the conference instance does not exist yet, so
neither base/config nor base/conference will emit any failure.
2018-05-04 13:02:19 +02:00
paweldomas
91a65735f9 ref(external API): emit CONFERENCE_WILL_JOIN on SET_ROOM
Make the external API emit CONFERENCE_WILL_JOIN early on SET_ROOM action
which occurs before the XMPP connection is created. At this point we
know that config has loaded and if there's a valid conference room to
be joined. We were thinking of doing that even on CONFIG_WILL_LOAD,
but that seemed to be to risky at this point.
2018-05-04 13:02:19 +02:00
virtuacoplenny
c2e40f975e chore(deps): update lib to hide error on extension install cancel (#2911) 2018-05-03 16:56:44 -07:00
Lyubo Marinov
5e79bbecef Codying style: naming, formatting, comments 2018-05-03 18:04:59 -05:00
Daniel Ornelas
e5309a6482 [iOS] Proxy CallKit API to be a feature of the SDK
With this the RN component and the consumer app can share same CallKit
provider, configuration, and enable to be part of multiple listeners of
the CallKit flow events. The main driver of this is to enable the
consumer app to be able to report an incoming call to the OS before
loading the JitsiMeetView. Once the user answers the call, the app can
instantiate a JitsiMeetView, pass the CallKit call UUIID, and the Jitsi
Meet components will handle the connection and report back to CallKit
that the  call has been established.
2018-05-03 18:04:59 -05:00
Lyubo Marinov
520bb8bd22 Coding style/naming: invite & invitee(s)
Hristo Terezov, Chris Cordle, and I/Lyubomir Marinov agreed that we'd
try to use "invite" & "invitee(s)" in Web/React's iframe API,
mobile/react-native's SDK invite API, and internally for the purposes of
consistency, ease of understanding, etc.
2018-05-03 10:31:15 +02:00
hristoterezov
69eefc82a5 feat(iframe_api): Add invite functionality. 2018-05-03 10:31:15 +02:00
hristoterezov
d1af11c67e ref(sendInvitesForItems): convert to action. 2018-05-03 10:31:15 +02:00
Leonard Kim
3091d9e6dd fix(feedback): remove textarea overflow hiding to allow scrolling
I'm unsure why all textareas need overflow hidden. Doing so
essentially overrides what I would expect to be standard textarea
behavior. I would rather remove the reset and fix any areas that
have issues.
2018-05-02 16:53:06 -05:00
Leonard Kim
19ce472d4d fix(large-video): enable canvas based background by default 2018-05-02 12:56:01 -05:00
Leonard Kim
a793742e3a fix(always-on-top): change button order
To be consistent with how the main window toolbar has audio mute,
hangup, and then video mute.
2018-05-02 19:04:13 +02:00
hristoterezov
3d8d5e3107 fix(deep-linking-mobile): Path of the images. 2018-05-02 11:16:00 -05:00
Saúl Ibarra Corretgé
0bad2dffb4 [iOS] Dybamically enable addPeopleEnabled / dialOutEnabled
If the beginAddPeople delegate method is implemented, and they haven't been
explicitly set to NO, they willbe YES.
2018-05-02 10:56:41 -05:00
Saúl Ibarra Corretgé
552fadc4a4 [RN] Don't process invite events if the external API scope doesn't match
This can happen if there are multiple JitsiMeetView instances are active at the
same time, because there is a single bridge, which means all of them would get
the events.
2018-05-02 10:56:41 -05:00
Saúl Ibarra Corretgé
ed7d8ac57e [RN] Cleanup subscriptions for the invite module 2018-05-02 10:56:41 -05:00
Saúl Ibarra Corretgé
cf6dd98b02 [iOS] Document invite module methods 2018-05-02 10:56:41 -05:00
Saúl Ibarra Corretgé
6c602accae [iOS] Fixup style 2018-05-02 10:56:41 -05:00
paweldomas
17ae89a56c ref(PiP/actions): remove 'is ok to enter PiP' check
Currently enterPictureInPicture action can only be dispatched when
the app is on the conference view and the enter PiP button is displayed,
so no check should be necessary.
2018-05-02 17:06:24 +02:00
paweldomas
565fd37f28 fix(Android|PiP): do not invoke 'enterPictureInPicture' in PAUSED state
Activity.enterPictureInPictureMode method must be invoked synchronously
on userLeaveHint callback in order to be sure that the current Activity
is still visible (does not transit to PAUSED state). Previously if the
asynchronous processing would be delayed enough for the Activity to go
into the PAUSED state it will be too late to go into the PiP mode.
2018-05-02 17:06:24 +02:00
Lyubo Marinov
effd3728b6 [RN] add support for inviting participants during a call on mobile (2) 2018-05-02 12:54:02 +02:00
virtuacoplenny
f450756337 chore(deps): update lib-jitsi-meet for getting youtube url (#2902) 2018-05-01 15:14:44 -07:00
Leonard Kim
f015f4edc3 feat(large-video): background blur through canvas and feature flag
To reduce the amount of motion that has to be blurred, use a canvas
to essentially set the FPS of the video background. This canvas
component is behind a temporary feature flag, as well as being able
to disable the blur, so it can be played around with on deployed
environments.
2018-05-01 17:11:25 -05:00
Leonard Kim
0831c16d7e fix(large-video): apply blur to only one container 2018-05-01 17:11:16 -05:00
Leonard Kim
d94093a01e fix(hangup): remove device change listener
When closing and reopening a notebook, the browser will fire
a devicechange event. This event should not be listened to
after hangup because the current listener will call gum if
there is no current audio/video, which is the case after
hangup.

Initially this change was going to be remove all conference
listeners but then I noticed that the listener for devicechange
is set differently. It might be worthwhile future work, although
potentially unnecessary right now, to ensure all listeners
registered in conference.js are properly cleaned up on hangup.
2018-05-01 17:10:56 -05:00
zbettenbuk
1eac4c51ca [RN] Add missing key prop to Android page indicator 2018-05-01 12:57:03 -05:00
Leonard Kim
eaea0e5f49 fix(languages): remove trailing comma from json 2018-05-01 10:24:22 -05:00
smithgeek
b2971aa9be Fix name of display name change action. (#2468) 2018-05-01 17:13:18 +02:00
Tunc Kayikcioglu
f64fdb4a8f Updated available languages list (#2850) 2018-05-01 17:10:51 +02:00
damencho
31dec2cf99 Cleans libs folder before create it and deploy to it. 2018-05-01 09:15:57 -05:00
zbettenbuk
54b6db02d8 Fix error on conference join when calendar is disabled 2018-05-01 09:09:32 -05:00
zbettenbuk
68608478f6 Refactor PagedList components to be independent from the lists it renders 2018-05-01 09:09:32 -05:00
Дамян Минков
2ee8f1ef58 Updates postinst prosody (#2896)
* Creates conf.d in /etc/prosody if missing.

Fixes a problem installing prosody 0.10 when using prosody repositories.

* Cleanups certificates on purge.

There are various occasions where users purge packages and the new installations after that generate certificate which doesn't end up in the java trust store on the target machine.

* Generate jicofo user and component passwords if missing.

There are situations where if prosody is already installed, the order of configuring the packages is not in the correct order. In those situations jitsi-meet-prosody got configured before jicofo and the user password and the component secret are not available and we ask the user for that and later when jicofo is configured we generate new set of them. Now we will end up always generating them in jitsi-meet-prosody or jicofo and we will reuse them. See https://github.com/jitsi/jicofo/pull/283.
2018-04-30 15:19:30 -07:00
Louis Chen
627b9d319c [RN] Pollyfill DOMParser
It's required by lib-jitsi-meet when using WebSockets.
2018-04-30 08:52:41 +02:00
virtuacoplenny
aaf2f428e6 feat(recording): new label for live streaming (#2890) 2018-04-29 21:30:07 -07:00
virtuacoplenny
f4060975d1 feat(device-selection): design tweaks (#2802)
- Change copy
- Add labels to dropdowns
- Adjust color and positioning
2018-04-27 18:43:11 -07:00
virtuacoplenny
0a0256501c feat(recording): new icon when recording is active (#2884)
- Update font files to add new icon.
- Update markup and style so the icon has a small background
  to fill in the text of the icon.
- Remove some css transitions that don't seem to do much.
2018-04-26 14:24:52 -07:00
paweldomas
81fc961998 fix(invite): check Toolbox render method error
The app will crash for me with react complaining about not a component
being passed.
2018-04-26 15:12:03 -05:00
virtuacoplenny
e098ad87f4 feat(icons): add new recording button icon (#2834)
* feat(icons): add new recording button icon

* feat(toolbar): show different rec/streaming icon
2018-04-26 10:26:41 -07:00
virtuacoplenny
ed395036b7 fix(info): change jsdoc to avoid linting warning (#2881) 2018-04-26 10:10:24 -07:00
Zoltan Bettenbuk
4f8fd1019b Separate local thumbnail in filmstrip (#2848)
* Separate local thumbnail in filmstrip

* style(Filmstrip.native): utilize full line length
2018-04-26 07:44:23 -05:00
hristoterezov
f14095ecfc feat(deep_linking): add analytics
In order to be able to add analytics to the deep-linking pages the
lib-jitsi-meet initialization has been moved so it happens earlier.

The introduced `initPromise` will eventually disappear, once conference is
migrated into React and / or support for Temasys is dropped. At that stage, it
can be turned into a sync function which all platforms share.
2018-04-26 10:11:34 +02:00
zbettenbuk
6947926494 Add dynamic move threshold to pnz touch detection 2018-04-25 16:35:22 -05:00
hristoterezov
784d94b30f fix(deeplinking): logo image 2018-04-25 14:19:08 -05:00
Saúl Ibarra Corretgé
1d7e0845aa [RN] use the share button if the invite button is not enabled 2018-04-25 18:58:06 +02:00
Ryan Peck
f64c13d4b7 [RN] add support for inviting participants during a call on mobile
* Button conditionally shown based on if the feature is enabled and available
* Hooks for launching the invite UI (delegates to the native layer)
* Hooks for using the search and dial out checks from the native layer (calls back into JS)
* Hooks for handling sending invites and passing any failures back to the native layer
* Android and iOS handling for those hooks

Author: Ryan Peck <rpeck@atlassian.com>
Author: Eric Brynsvold <ebrynsvold@atlassian.com>
2018-04-25 18:58:06 +02:00
George Politis
4e36127dc7 config: Whitelists enable{Remb,Tcc} and minParticipants. 2018-04-24 16:01:23 -05:00
Дамян Минков
8b1aff5512 Adds in memory log storage, to be used while testing. (#2858)
* Adds in memory log storage, to be used while testing.

Enabling it only when config.debug is set, a configuration provided by jitsi-meet-torture.

* Moves to using config.testing.testMode property for logs storage.

* Fixes comments.
2018-04-24 13:56:54 -05:00
Saúl Ibarra Corretgé
d7103c1c4c feat(UI): simplify code (#2847)
Avoid branching on the same condition and remove unneeded showToolbar call on
filmstrip only mode.
2018-04-24 11:36:56 -07:00
paweldomas
9cbcbf6e26 fix(PictureInPictureModule): catch the RuntimeException
Activity.enterPictureInPictureMode can fail for a couple of reasons
mentioned in the JSDoc:

"The system may disallow entering picture-in-picture in various cases,
including when the activity is not visible, if the screen is locked or
if the user has an activity pinned."

It seems to be safe to assume that those cases will be caught by
a RuntimeException handler (only RuntimeExceptions can be left without
explicit catch block).

Anyway the root cause for problems is the fact that the current process
for going to the picture in picture mode is not synchronised with
Activity's lifecycle. On Activity's "userLeaveHint" callback we dispatch
async task to the JS code which only then after dispatching some more
stuff eventually call native method that enter PiP. In case we spend too
much time on the JS side and the Activity goes to PAUSED state the call
will fail with IllegalStatException: "activity is not visible",
"activity is paused" etc. This means with this fix the app will not
crash, but we'll see it sometimes not go to the PiP mode as expected.
2018-04-22 00:41:18 -05:00
virtuacoplenny
2c4a3b0f60 Show the YouTube live stream URL (#2837)
* feat(recording): show the YouTube live stream URL

- From the start live stream dialog, push up the broadcast ID
  of the chosen broadcast. It is assumed the ID can be used to
  create the YouTube link.
- Listen for lib-jitsi-meet to emit updates of the known live
  stream URL, shove it into redux, and have InfoDialog display
  it.

* ref(info): pass in dial in and live stream url

Passing these values in should trigger AtlasKit InlineDialog
to re-render and reposition itself.

* ref(info): use conference existence as trigger for autoshowing dialog

* feat(info): add live stream link to invite copy

* Revert "ref(info): use conference existence as trigger for autoshowing dialog"

This reverts commit 1072102267.

* hidden -> url

* _onClickHiddenURL -> _onClickURLText
2018-04-20 10:28:16 -07:00
Zoltan Bettenbuk
d82f172db8 Merge pull request #2846 from saghul/make-dev
misc: add helper make dev command
2018-04-20 14:08:42 +02:00
Saúl Ibarra Corretgé
169c47ac7f misc: add helper make dev command
Running webpack-dev-server is not enough, so add a helper which takes are of
doing the needful.
2018-04-20 11:37:28 +02:00
paweldomas
2af76ebcf9 fix(testing): add TestHint for LargeVideo
Since the main conference container is no longer "clickable" there must
be a way for clicking on the "large video". A clickable TestHint nested
in ParticipantView makes it easier for dealing with the fact that the
click handler is not always on the same component (required for the
pinch and zoom feature to work correctly).
2018-04-19 16:49:22 -05:00
paweldomas
6931b8f2fb feat(TestHint): add 'onPress' property
Allows to bind a click handler to a TestHint.

When a mobile test wants to click an UI element it must be able to
locate it through the accessibility layer. Now the problem with that is
that there is currently no uniform way for finding element on both iOS
and Android. This problem is solved by TestHint component which takes
an id parameter which then can be specified in the corresponding java
TestHint class in jitsi-meet-torture to easily find it. By being able to
add a click handler to a TestHint, it's possible to duplicate original
handler under nested TestHint and then find it easily on the torture
side.
2018-04-19 16:49:22 -05:00
paweldomas
adec8e6438 ref(TestHint): render only in test mode
Adds the logic to render TestHint only when the test mode is enabled
in order to be able to put independent TestHints in other places than
the TestConnectionInfo component.
2018-04-19 16:49:22 -05:00
paweldomas
382c548cf9 ref(testing): move 'testing' feature to base 2018-04-19 16:49:22 -05:00
Shuai Li
ff9820a61b [react-native-webrtc] ios: fix build when using use_frameworks! 2018-04-19 16:32:42 -05:00
zbettenbuk
1ab107b238 [react-native-calendar-events] Null check empty cursor 2018-04-19 15:35:57 -05:00
Saúl Ibarra Corretgé
2861d8d24e misc: remove dead code 🔥🔥🔥 (#2844)
- old toolbox actions
- chat command processor
- room subject handling
2018-04-19 10:24:16 -07:00
Дамян Минков
172342cac3 Updates lib-jitsi-meet to 3077772. (#2845)
Fixes custom callstats script param name.
2018-04-19 09:18:19 -07:00
Zoltan Bettenbuk
f8941c846a Merge pull request #2838 from saghul/fix-statusbar-ios
[iOS] Fix statusbar color while in a conference
2018-04-19 13:21:46 +02:00
Saúl Ibarra Corretgé
8daa13cd99 [iOS] Fix statusbar color while in a conference
Be explciit about the appearance we desire, since each mounted StaturBar
component will override the existing values. In this case, the problem was
caused because the default on iOS is dark, whereas it's light on Android.

Set it to light so it works consistently across both, which is what we want.
2018-04-19 10:56:09 +02:00
Leonard Kim
a86ca3f41c fix(toolbar): set recording icon size to prevent resizing flash
There is a slight moment when the recording icon is loading that
its container does not have width. Set the width of the container
so it doesn't collapse. Also, push it a little to the right so
it aligns better with other icons.
2018-04-18 13:57:53 -05:00
Leonard Kim
c029663b77 fix(toolbar): move chat counter and stop its pointer events
The chat counter needs to be moved out of the way of the chat
button. The counter started covering the button when all the
toolbar buttons were made smaller. Also, turning off the
counters pointer events should at least make the button
clickable if this ever happens again.
2018-04-18 13:57:45 -05:00
Lyubo Marinov
66bf5cf966 [RN] Avoid "pinch to zoom" onPress
It's too sensitive and most of the time I cannot perform an onPress. In
contrast, the builtin/default/standard onPress is noticeably more
forgiving. While we fix the sensitivity of "pinch to zoom", don't use
its onPress unless absolutely necessary i.e. use it only for desktop
streams.
2018-04-17 17:42:46 -05:00
zbettenbuk
63c165ee8b More generic way to refresh lists on the welcome screen 2018-04-17 17:42:46 -05:00
zbettenbuk
374e3ccf2c Properly gate calendar feature on-off 2018-04-17 17:41:12 -05:00
Leonard Kim
09482f053b ref(toolbar): remove main css for old toolbar 2018-04-17 20:22:00 +02:00
Leonard Kim
1e69dc93d6 ref(toolbar): kill Stateless Toolbar and Invite, Feedback, Profile buttons 2018-04-17 20:22:00 +02:00
zbettenbuk
008645568c Fix startAudioOnly and startWithVideoMuted collision on start from URL
Zoltan Bettenbuk suggested the following:

         const state = getState();

          if (desiredTypes.length === 0) {
 -            const { audio, video } = state['features/base/media'];
 -
 -            audio.muted || desiredTypes.push(MEDIA_TYPE.AUDIO);
 -            video.muted || desiredTypes.push(MEDIA_TYPE.VIDEO);
 +            const startAudioOnly = getPropertyValue(state, 'startAudioOnly');
 +            const startWithAudioMuted
 +                = getPropertyValue(state, 'startWithAudioMuted');
 +            const startWithVideoMuted
 +                = getPropertyValue(state, 'startWithVideoMuted');
 +
 +            if (!startWithAudioMuted) {
 +                desiredTypes.push(MEDIA_TYPE.AUDIO);
 +            }
 +            if (!startAudioOnly && !startWithVideoMuted) {
 +                desiredTypes.push(MEDIA_TYPE.VIDEO);
 +            }
          }

          const availableTypes

The final commit is really a different implementation of the same idea
but takes into account that the state of base/media already contains the
intent of the URL and notices the delay in the realization of the
background app state.

Additionally, unbreaks one more case where setAudioOnly is incorrectly
dispatched on CONFERENCE_LEFT or CONFERENCE_FAILED and, consequently,
overrides the intent of the URL.
2018-04-16 22:02:37 -05:00
Lyubo Marinov
13e0e18f37 Coding style: formatting, typos 2018-04-16 18:09:08 -05:00
zbettenbuk
8c0bb377ba Calendar list shouldn't show unnormalised URIs 2018-04-16 18:09:08 -05:00
zbettenbuk
fc25125667 Fix app crash with special characters in the room name 2018-04-16 18:09:08 -05:00
virtuacoplenny
5b7b373e21 fix(keyboard-shortcuts): process Unidentified keys (#2813)
* fix(keyboard-shortcuts): process Unidentified keys

When processing keyboard events for keyboard shortcuts,
if the value of an event's "key" attribute is "Unidentified",
the event should be further processed instead of the "key"
being returned to be mapped to a registered keyboard shortcut.
This occurs on edge, where question mark has the key
"Unidentified" but has the proper keyCode of 191.

* squash: add comment
2018-04-16 16:33:26 -05:00
virtuacoplenny
8e42a7b034 fix(toolbar): make toolbar smaller (#2808) 2018-04-16 14:17:03 -07:00
virtuacoplenny
4bd94fc94c fix(invite): tweak invite modal copy and avatar sizes (#2818) 2018-04-16 13:58:20 -07:00
virtuacoplenny
41e1c3a2e2 fix(tooltip): description prop deprecated, use content instead (#2806) 2018-04-16 10:21:01 -07:00
zbettenbuk
6586be9a8e Fix plist file formatting 2018-04-15 23:16:44 -05:00
zbettenbuk
56d8210e35 Add ability to detect calendar permission description in the plist file (iOS) 2018-04-15 23:16:44 -05:00
Lyubo Marinov
f1ab160c62 Coding style: formatting, naming 2018-04-15 23:16:44 -05:00
Lyubo Marinov
eac74aa0b7 [RN] Fix _getRouteToRender after Deeplinking (#2760) 2018-04-15 23:16:44 -05:00
zbettenbuk
e30d141cec Proper use of getPropertyValue in base/media 2018-04-13 21:57:40 -05:00
zbettenbuk
1513e1f3b3 Make getPropertyValue's config easier to use 2018-04-13 21:57:07 -05:00
virtuacoplenny
0539e8f2df fix(recording): do not spell check stream key input (#2811) 2018-04-13 19:37:06 -07:00
hristoterezov
eb19f94598 Deeplinking (#2760)
* feat(Deeplinking): Implement for web.

* ref(unsupported_browser): Move the mobile version to deeplinking feature

* feat(deeplinking_mobile): Redesign.

* fix(deeplinking): Use interface.NATIVE_APP_NAME.

* feat(dial_in_summary): Add the PIN to the number link.

* fix(deep_linking): Handle use case when there isn't deep linking image.

* fix(deep_linking): css

* fix(deep_linking): deeplink -> "deep linking"

* fix(deeplinking_css): Remove position: fixed

* docs(deeplinking): Add comment for the openWebApp action.
2018-04-13 17:00:40 -07:00
Daniel Ornelas
fd44721bac Clean up PiP mode for iOS 2018-04-13 16:04:51 -05:00
virtuacoplenny
219b93a3c9 fix(recording): fetch events also for available broadcasts (#2810)
* fix(recording): fetch events also for available broadcasts

Only "persistent" broadcasts were being fetched using the
YouTube API. Fetching "all" will get persistent broadcasts
and events. If events use a custom encoder then the stream
key can be obtained. If google hangouts is used for the event
then a stream key will not be obtainable; in those cases
input empty string as the stream key.

* squash: fix typos, reword comments, use object for preventing duplicate broadcasts
2018-04-13 13:49:24 -07:00
virtuacoplenny
2a55548b84 fix(info): hide anchor hover colors for the call url (#2807)
The call url is an anchor element so that right clicking it
can bring up the copy link option in the context menu.
Clicking on it does a no-op so the anchor was colored to
look like plain text. Hovering over it right now makes it
look like an anchor due to some atlaskit color, so supress
the coloring.
2018-04-13 10:15:29 -07:00
paweldomas
8f142d5ec4 doc(testing/actions): fill missing in 'setConnectionState' 2018-04-13 11:35:25 -05:00
Leonard Kim
5cf16a20d3 ref(always-on-top): refactor to stop using old toolbar components 2018-04-13 10:09:04 +02:00
virtuacoplenny
be78ab5317 fix(welcome-page): clear update name timeout on unmount (#2800) 2018-04-12 14:23:30 -07:00
virtuacoplenny
907cb013a8 fix(hangup): ensure large video exists before getting displayed id (#2799)
On hangup while audio only, audio only is set to false on
conference leave to reset redux state on mobile. Large video will
update itself on conference leave, but large video has been cleaned
up by that time so trying to directly access the user ID on large
video will fail. Be defensive about this check, because its
callers are already defensive about its return value.
2018-04-12 14:23:03 -07:00
Leonard Kim
8828525511 chore(deps): update @atlaskit/tooltip to 9.1.1
Issues with tooltips not getting repositioned to display on
screen have been addressed.
2018-04-12 15:17:59 -05:00
paweldomas
c03e66954d fix(base/tracks): local track for video already exists
The _setMuted method in a corner case was making an attempt to create
second video track, because it was not taking pending tracks into
account.
2018-04-11 22:40:51 -05:00
virtuacoplenny
157800c494 fix(toolbar): video quality button shows current video quality (#2761) 2018-04-11 13:04:40 -07:00
virtuacoplenny
3285d647e6 feat(feedback): tweak styling (#2791)
- Green stars
- Label for feedback box
- Adjust margins/padding
2018-04-11 11:31:03 -07:00
Zoltan Bettenbuk
78ff0f7864 Separate handling config and profile with precedence (#2784) 2018-04-11 10:02:31 -07:00
Zoltan Bettenbuk
76c56339c4 Merge pull request #2794 from saghul/xcode-93
[iOS] Add new file created by Xcode 9.3
2018-04-11 12:29:43 +02:00
Saúl Ibarra Corretgé
95927c4804 [iOS] Add new file created by Xcode 9.3
Looks like it's a good idea to check it in: https://stackoverflow.com/a/49564624
2018-04-11 10:47:26 +02:00
Neil Brown
6c5482fb9d Update quick-install.md (#2657)
Add potential additional package to install, tested on fresh Debian 9 installation.
2018-04-11 10:42:27 +02:00
Leonard Kim
4f157b71f3 ref(toolbar): remove custom (old) InviteButton dropdown config 2018-04-11 10:35:01 +02:00
Leonard Kim
5270da4c14 ref(toolbar): remove reference to unused config autoEnableDesktopSharing 2018-04-11 10:35:01 +02:00
Leonard Kim
fe473bf426 ref(toolbar): remove old recording button logic 2018-04-11 10:35:01 +02:00
Leonard Kim
abee3331aa ref(toolbar): remove remnant of custom tooltip display on demand
The feature was not ported to the new toolbar. Arguable these
can all be moved into notification but for now simply the
logic will be removed and worked on again as demand arised.
2018-04-11 10:35:01 +02:00
Leonard Kim
a5e4fb000f ref(toolbar): removed unused dialpad logic
The old toolbar had a dialpad button that did a no-op.
Remove the remnant of that logic.
2018-04-11 10:35:01 +02:00
paweldomas
27a1be1e1c chore: update lib-jitsi-meet to 39eea17e7e2f8ff4cc273239a6e73f2a149b96e2 2018-04-10 16:43:12 -05:00
paweldomas
4d942440db feat: add TestConnectionInfo for mobile
Adds TestConnectionInfo component which exposes some internal app state
to the jitsi-meet-torture through the UI accessibility layer. This
component will render only if config.testing.testMode is set to true.
2018-04-10 16:43:12 -05:00
paweldomas
461540d874 ref(stats): start the statsEmitter for both mobile and web
Moves the statsEmitter.start() invocation to the middleware of
the connection-indicator feature, so that it's started for both mobile
and web (now mobile needs RTP stats for the tests).
2018-04-10 16:43:12 -05:00
Leonard Kim
3f99e80358 chore(deps): update Tooltip, InlineDialog, and InlineMessage 2018-04-10 16:42:46 -05:00
Leonard Kim
2ce3c2d459 ref(filmstirp): remove animate flag from resizeThumbnails
The flag is always false.
2018-04-10 16:18:45 -05:00
Leonard Kim
8363f3cfeb ref(toolbar): remove all jquery filmstrip animations
The animate flag is always being passed in as false, so
essentially the animation isn't needed, unless a setTimeout 0
behavior is for some reason required...
2018-04-10 16:18:45 -05:00
Leonard Kim
f8537dde6b fix(filmstrip): set SmallVideo styles instead of using animate
jquery animate during animations sets an element's overflow to
hidden and then back to the overflow declared before the start
of the animation. If multiple animations are fired, then the
overflow could be set to hidden permanently. No calls
to Filmstrip#resizeThumbnails have animate set to true, so the
animate call is not even needed.
2018-04-10 16:18:45 -05:00
virtuacoplenny
f34686afee fix(recording): return true to close stop recording modal on cancel (#2776) 2018-04-10 15:51:49 -05:00
virtuacoplenny
ea1aef0703 fix(toolbar): remove ref to removed MAIN_TOOLBAR_BUTTONS (#2787) 2018-04-10 15:51:37 -05:00
paweldomas
8b2ce21e1a fix(RN): bundle sound files in release build
On Android the files will be copied to the assets/sounds directory of
the SDK bundle on build time. To play the "asset:/" prefix has to be
used to locate the files correctly.

On iOS each sound file must be added to the SDK's Xcode project in order
to be bundled correctly. To playback we need to know the path of the SDK
bundle which is now exposed by the AppInfo iOS module.
2018-04-10 10:59:52 +02:00
Leonard Kim
c377219013 feat(info): invite url as an anchor for copying from context menu 2018-04-10 09:41:38 +02:00
Leonard Kim
10c8d380b7 fix(video-quality): different tooltips for different definitions 2018-04-10 09:39:37 +02:00
Leonard Kim
7e9a64d7c1 fix(quality-label): show eye icon when for muted video
Instead of continuing with HD/SD/LD, show the eye icon
for when the participant on large video is muted or has
no video.
2018-04-10 09:39:37 +02:00
Leonard Kim
a783939f12 ref(toolbar): remove old InviteButton 2018-04-10 09:34:52 +02:00
Leonard Kim
6883ee0141 ref(toolbar): rename ToolbarButtonV2 to ToolbarButton 2018-04-10 09:34:52 +02:00
Leonard Kim
1eee20dd5a ref(toolbar): remove contact list 2018-04-10 09:34:52 +02:00
Leonard Kim
7d86e3f8e7 ref(toolbar): remove Video Quality Button 2018-04-10 09:34:52 +02:00
Дамян Минков
60fde5efb8 deps: update node-sass to 4.8.3
Fixes #2762 #2237
2018-04-10 09:24:06 +02:00
Zoltan Bettenbuk
79b7e1641d Add pinch zoom functionality 2018-04-10 01:20:53 -05:00
Zoltan Bettenbuk
decbcefbd4 [RN] Don't press on Conference in preparation for 'pinch to zoom'
TouchableWithoutFeedback and TouchableHighlight interfere with the
implementation of 'pinch to zoom' to come. We prepare for it by driving
the onClick/onPress handler(s) out of Conference, through LargeVideo and
ParticipantView into Video itself where the bulk of 'pinch to zoom' will
be implemented.
2018-04-10 01:20:52 -05:00
Zoltan Bettenbuk
cb70c084b3 [RN] "The View is never the target of touch events"
In preparation for "pinch to zoom" support in desktop streams on mobile, make
certain Views not intervene in touch event handling. While the modification is
necessary for "pinch to zoom" which is coming later, it really makes sense for
the modified Views to not be involved in touching because they're used to aid
layout and/or animations and are to behave to the user as if they're not there.
2018-04-10 01:20:52 -05:00
virtuacoplenny
0afe72d42b fix(toolbar): tweak overflow menu order (#2781) 2018-04-09 23:06:01 -07:00
Daniel Ornelas
84e5e657a0 [iOS] Fix RNFetchBlob calling UI API on a background thread
Update RNFetchBlob to use a commit that fixes issues with calling UI API
on a background thread. Note: The commit used is from a forked repo that
is not yet merged on the new source for this RN component, eventually we
should be consuming from this repo instead
https://github.com/joltup/react-native-fetch-blob
2018-04-09 16:27:06 -05:00
virtuacoplenny
d8ad39ed3f fix(welcome-page): modify styling for narrow screens (#2724)
* fix(welcome-page): modify styling for narrow screens

* squash: fix autoscrolling on mobile safari
2018-04-09 15:50:57 -05:00
virtuacoplenny
16c2bc2d15 fix(invite): do not show caret in input (#2774) 2018-04-09 12:40:17 -07:00
Jacob MacElroy
01e0dfe58a Adding a prosody module to support sip-style call flows.
When combined with mod_muc_poltergeist mod_muc_call allows
for enabling call features using a proper ext_events.lib.lua
implementation. By default when the module is configured only
stub implementations are used for ext_events.lib.lua as these
are unique between deployments.
2018-04-09 13:46:17 -05:00
virtuacoplenny
38c8a41634 fix(toolbar): etherpad button should say open when etherpad is hidden (#2769) 2018-04-09 11:02:21 -07:00
Guus der Kinderen
b2efcadeb8 deps: update react-native-webrtc 2018-04-09 12:08:57 +02:00
Saúl Ibarra Corretgé
b73b51f1f4 feat(toolbox): axe the old toolbox (#2731)
This PR takes The Bulldozer Approach (R): removes the old toolbox and lots of
associated code, though not all of it. Subsequent cleanups will follow.
2018-04-08 22:03:26 -07:00
Leonard Kim
0cd32c8155 fix(filmstrip-only): override Atlaskit background for transparency 2018-04-06 15:18:05 -05:00
Leonard Kim
45adf3e26a fix(toolbar): adjust sizings and colors 2018-04-06 15:17:58 -05:00
Leonard Kim
58d1b69148 chore(deps): update lib-jitsi-meet to 7ab5434a 2018-04-06 15:17:50 -05:00
Leonard Kim
1f0dc6fcd8 fix(feedback): modify user-select none declaration for edge 2018-04-06 15:17:42 -05:00
Saúl Ibarra Corretgé
95e00405b6 feat(keyboard-shortcuts): fix removing shortcuts (#2749) 2018-04-06 08:11:21 -07:00
paweldomas
968b279b37 feat(android): support NAT64
Adds Nat64InfoModule which resolves IPv6 addresses for IPv4 addresses
in IPv6 only network where jitsi-meet deployment does not provide any
IPv6 addresses as ICE candidates.
2018-04-05 10:21:59 -05:00
Zoltan Bettenbuk
0456df239f Fix case sensitive recent list (#2730) 2018-04-04 12:54:42 -07:00
virtuacoplenny
2f23f8e400 Info dialog: bold labels, no url truncation, only auto show on lonely call (#2619)
* fix(info): bold info labels

* fix(info): do not truncate url

* feat(info): show only during a lonely call
2018-04-04 08:58:54 -07:00
Zoltan Bettenbuk
2412239206 [RN] Assorted hintbox fixes
* Align hint box text to center

* Fix disappearing hint box on android
2018-04-04 14:50:12 +02:00
Zoltan Bettenbuk
cc6e04ddf8 [RN] Fix calendar alerts when case sensitive URLs are used 2018-04-04 11:21:02 +02:00
paweldomas
6f11bbc400 feat(mobile): handle kicked out of the conference
Being kicked out of the conference will result with a conference failed
event with 'conference.kicked' reason and take the user back to
the welcome page by navigating to 'undefined'.
2018-04-03 16:02:15 -05:00
virtuacoplenny
7c08116dc2 ref(toolbar): add accessibility labels for torture tests (#2685)
* ref(toolbar): add accessibility labels for torture tests

* squash: update propTypes
2018-04-03 12:32:00 -07:00
Leonard Kim
f8717a7135 fix(gum): add electron string for requesting gum permissions
Electron generally can bypass having to get permission for
audio and video. In the case it doesn't have it, and the
permission screen is displayed, a string should still display
prompting the user to click allow. Right now the string id
displays.
2018-04-02 16:13:57 -05:00
Leonard Kim
1b85442dba chore(deps): update lib-jitsi-meet to 6282e7a8
This update is explicitly for FF screenshare and
gum retry fixes.
2018-04-02 16:13:35 -05:00
George Politis
ea46cbc479 feat: enableTcc, enableRemb, minParticipants. 2018-04-02 15:37:53 -05:00
Leonard Kim
b76ab305e3 fix(welcome-page): prevent form submit to prevent page refresh 2018-03-30 15:16:22 -05:00
Leonard Kim
358ce0799e fix(toolbar): the conference obj is needed to submit feedback 2018-03-30 14:45:27 -05:00
Leonard Kim
e7223c49ef fix(feedback): let star label color be inherited from atlaskit 2018-03-30 14:23:01 -05:00
Leonard Kim
02a31746fb fix(toolbar): do not use toggle class for recording 2018-03-30 13:07:38 -05:00
Leonard Kim
40154b1feb fix(toolbar): tweak chat backgrounds to be darker 2018-03-29 13:38:42 -05:00
Leonard Kim
4c49e3bec0 fix(toolbar): use old toolbar logic for showing screenshare
I don't understand the old showDesktopSharingButton action
but I've tried my best to copy it over. There is an existing
issue where the keyboard shortcut gets registered when it
probably shouldn't because screensharing is disabled. It will
be fixed soon with refactoring of the entire logic determining
whether or not to show the screensharing button.
2018-03-29 13:38:42 -05:00
Leonard Kim
0a086fa3f7 fix(toolbar): do not show invite button if features not available
This is instead of showing the button with a tooltip about it
being disabled.
2018-03-29 13:38:42 -05:00
virtuacoplenny
b353b8fffb chore(deps): update lib-jitsi-meet to ef0e14b (#2679) 2018-03-29 13:42:42 +02:00
Zoltan Bettenbuk
a3c00021de [RN] Fix showing user avatar in sidebar 2018-03-29 11:47:32 +02:00
virtuacoplenny
1e0a3ceb74 fix(chat): polyfills for lib-jitsi-meet ChatRoom#onPresence (#2678)
The onPresence parsing was refactored to remove use of jQuery.
This exposed three methods not available in react-native:
ParentNode.children, ChildNode.remove, and
document.querySelectorAll. The querySelectorAll change could
be swapped for the already polyfilled querySelector, but
children and remove had to be added. The polyfills are based
on those supplied by MDN web docs, but modified to pass jitsi
linting.
2018-03-28 18:04:42 -07:00
Boris Grozev
8492aad7d6 npm: Updates lib-jitsi-meet to cab2fabd56e9591148997c78a82da433ecf28dec. 2018-03-28 16:08:54 -05:00
Leonard Kim
7ad9fa8392 fix(toolbar): exercise old video muting flow
The redux flows for video muting may not cover all cases
that the conference.js flows cover. Just exercise the old
flows to be safe.
2018-03-28 13:52:04 -05:00
Leonard Kim
6916252ce1 fix(toolbar): exercise conference audio toggling
The redux flows do not account for as many scenarios, such
as config.startWithAudioMuted being true.
2018-03-28 13:52:04 -05:00
Leonard Kim
b4eae56eed fix(toolbar): css hacks to raise notifications 2018-03-28 13:52:04 -05:00
Saúl Ibarra Corretgé
eb69fb69cb feat(conference): lower the redirect timeout after feedback submission (#2673) 2018-03-28 07:35:26 -07:00
virtuacoplenny
2b7cdbc6a8 ref(toolbar): use new toolbar by default (#2666) 2018-03-27 19:39:42 -05:00
jitsi-pootle
f3a90f048a New files added from translate.jitsi.org based on templates 2018-03-27 23:38:51 +00:00
virtuacoplenny
8bf69d30b7 fix(toolbar): make darker for better text contrast (#2667)
* fix(toolbar): make darker for better text contrast

* squash: borrow some atlaskit colors
2018-03-27 15:30:04 -07:00
Saúl Ibarra Corretgé
45078fe6b2 [RN] Don't auto-correct any field in settings 2018-03-27 12:58:56 -07:00
Saúl Ibarra Corretgé
4783b22018 [RN] Don't auto-capitalize email field in settings 2018-03-27 12:58:56 -07:00
Leonard Kim
d93782af8a feat(new-toolbars): initial implementation 2018-03-27 00:54:30 -05:00
Shuai Li
962df14382 [iOS] Fix launching the app after the introduction of Swift in sdk 2018-03-26 23:14:45 -05:00
virtuacoplenny
01db70fd3d Merge pull request #2636 from zbettenbuk/calendar-permission-fix
Reorganize calendar access request flow
2018-03-26 07:57:24 -07:00
Дамян Минков
6cc8800016 Update poltergeist's presence with identity information. (#2650) 2018-03-23 13:58:05 -07:00
virtuacoplenny
e5596c3cd5 fix(recording): let the google app for api calls be overridable (#2653) 2018-03-23 10:52:32 -07:00
virtuacoplenny
1b91e0bc2f improve invite error handling (#2649)
* fix(invite): do not send empty queries for people search

The endpoint might return an error if an empty query is sent.

* fix(invite): add error logging for failed people directory requests

The error currently being passed through from $.getJSON ended up
being an empty string plus was not getting logged. So switch to
fetch to move along with jquery killing and log the error.

* fix(dial-in): add error logging for failed requests

* ref(invite): create a fetch helper to remove duplicate logic
2018-03-23 09:37:04 -07:00
zbettenbuk
b258e0d397 Reorganize calendar access request flow 2018-03-23 07:53:36 +01:00
virtuacoplenny
83f47c2df1 feat(invite): add basic analytics for AddPeople dialog (#2641)
* feat(invite): add basic analytics for AddPeople dialog

Analytics for opening the dialog, closing the dialog, the
count of invites sent, and the count of invites errored.

* squash: fix typo, change default count init, remove extra analytics param
2018-03-22 17:53:16 -07:00
virtuacoplenny
a39da15c94 ref(invite): remove unused nuclear-js dep (#2642) 2018-03-22 16:22:26 -07:00
Daniel Ornelas
fd787abf85 Change deployment target of JitsiMeet iOS SDK to 10.0 2018-03-22 16:40:46 -04:00
Daniel Ornelas
7822155e5e Fix iPad rotation related issue when in PiP 2018-03-22 16:40:17 -04:00
Paweł Domas
15e1633d86 fix(config): no legacy over non-legacy override (#2644)
Do not take legacy property into account if there's non-legacy value.
2018-03-22 10:57:08 -05:00
Daniel Ornelas
de0a7bfcd3 Some improvements for handling completion of transitions. Fixed a wrong conferenceEnded value when user left the conversation. 2018-03-22 00:04:25 -04:00
Daniel Ornelas
5858859838 Addressing feedback from PR 2018-03-22 00:04:25 -04:00
Daniel Ornelas
8428dd95c2 Implement Exit PiP mode in PiPWindow 2018-03-21 22:00:43 -04:00
Daniel Ornelas
a26ccf195e Added initialization of JitsiMeetManager components 2018-03-21 22:00:43 -04:00
Daniel Ornelas
0a5f60c637 Refactor PiP code into its own components 2018-03-21 22:00:43 -04:00
Daniel Ornelas
f8163de765 Implement Jitsi meet presentation interface that supports custom PiP solution 2018-03-21 22:00:43 -04:00
Daniel Ornelas
181580871f Initial work for testing PiP mode 2018-03-21 22:00:43 -04:00
damencho
ea431ca90c Adds new text for Firefox screen-sharing permission denied error. 2018-03-21 18:06:17 -05:00
damencho
a902540167 Removes Firefox extension handle (removed in FF newer than latest ESR). 2018-03-21 18:06:17 -05:00
virtuacoplenny
823481dc1d feat(recording): use google api to get stream key (#2481)
* feat(recording): use google api to get stream key

* squash: renaming pass

* squash: return full load promise

* sqush: use google api state enum

* squash: workaround for lib not loading

* another new design...

* increase timeout workaround for gapi load issue

* styling pass

* tweak copy

* squash: auto select first broadcast
2018-03-21 11:26:52 -07:00
paweldomas
b5b99301ca fix: synchronize global 'config' var with the reducer's state 2018-03-20 21:07:45 -04:00
paweldomas
ef52f09910 ref(config): override config from URL on mobile
Moves the things around to be able to override the config with the URL
params specified in the hash part of the location URI to which the app
is navigating to.
2018-03-20 21:07:45 -04:00
Leonard Kim
6a066c3079 squash: update package-lock again for integrity shas 2018-03-20 16:06:50 -05:00
Leonard Kim
71e368f70e squash: override atlaskit styles for dropdowns to display clearer 2018-03-20 16:06:50 -05:00
Leonard Kim
134ff71c78 feat(modals): use dark theme 2018-03-20 16:06:50 -05:00
bbaldino
fef1d8b520 add a prosody module to insert identity information (when available) … (#2627)
* add a prosody module to insert identity information (when available) into
presence

prosody will check for jitsi_meet_context_user and
jitsi_meet_context_group in the session and, if they are present, insert
them into presence (we do this in prosody so they cannot be spoofed).

* remove unused 'presence' variable

* refactor to modify presence message in place

* make object member access consistent

* make the group information optional
2018-03-20 15:27:39 -05:00
virtuacoplenny
309fcf9672 fix(filmstrip): fix local video alignment with no invite button (#2629)
Hardcoding an offset from the bottom of 32px causes issues in
horizontal filmstrip when there is no invite button, because
then the local video just displays 32px from the bottom as there
is no button to take up space above it. Instead leverage flex
alignments to align the bottom of the video to the bototm of
the filmstrip.
2018-03-20 12:28:09 -07:00
virtuacoplenny
2eafbacdd4 chore(deps): update lib-jitsi-meet to 0503ec4d for edge p2p progress (#2631) 2018-03-20 11:34:57 -07:00
virtuacoplenny
26ea667170 Merge pull request #2628 from jitsi/welcome_page_analytics
fix(analytics): Init analytics for the web welcome page.
2018-03-20 10:02:07 -07:00
jitsi-pootle
5f43e8f8c7 New files added from translate.jitsi.org based on templates 2018-03-20 15:52:21 +00:00
Shikhar Agnihotri
9ef83702cf Update CONTRIBUTING.md (#2601) 2018-03-20 09:49:35 -05:00
hristoterezov
fda2548a38 fix(analytics): Init analytics for the web welcome page. 2018-03-19 17:51:22 -05:00
Дамян Минков
eb53944a4d Adds poltergeist support for locked rooms. (#2626) 2018-03-19 16:20:44 -05:00
Saumeya Katyal
2334eb9967 doc: Add dev server steps (#2610)
* doc: Add webpack-dev-server steps
2018-03-19 10:16:01 -05:00
Emil Ivov
04bd4a9038 Merge pull request #2617 from virtuacoplenny/lenny/info-dialog-again
fix(info): update copy text to find correct var
2018-03-15 12:16:20 -05:00
virtuacoplenny
eb8f34cee8 Merge pull request #2612 from jitsi/no_protocol_in_intent_uri
feat(UnsupportedMobileBrowser): do not include protocol in the intent
2018-03-15 10:01:31 -07:00
Leonard Kim
b9379f5996 fix(info): update copy text to find correct var 2018-03-15 09:42:39 -07:00
paweldomas
40d7d0c9cb feat(UnsupportedMobileBrowser): do not include protocol in the intent
Do not include the protocol part in the intent URL.
2018-03-14 17:44:32 -05:00
zbettenbuk
357f173e85 Remove obsolate PlatformElements.native.js 2018-03-13 18:04:17 -05:00
zbettenbuk
7da26042b3 Avoid asking for calendar permission on app start 2018-03-13 18:04:17 -05:00
zbettenbuk
c86c7beb24 Refactor i18n calendar formatter 2018-03-13 18:04:17 -05:00
zbettenbuk
1020a54a33 Add Android navigation bar 2018-03-13 18:04:17 -05:00
zbettenbuk
c84abd543e Add support for app link scheme 2018-03-13 18:04:16 -05:00
zbettenbuk
4b17c6f015 Add pull-to-refresh functionality 2018-03-13 18:04:16 -05:00
zbettenbuk
cb973b61aa Implement adaptive known domain list 2018-03-13 18:04:16 -05:00
zbettenbuk
b096622995 Unify recent and meeting lists 2018-03-13 18:04:16 -05:00
zbettenbuk
ae0bf876a8 Add conference notification 2018-03-13 18:04:16 -05:00
zbettenbuk
bba480f329 Add calendar-sync feature 2018-03-13 18:04:14 -05:00
paweldomas
4dbcaf851f flow(AbstractAudio): specific function types 2018-03-13 16:57:29 -05:00
paweldomas
04dff9059b ref(AudioOutputPreview): use Audio from base/media 2018-03-13 16:57:28 -05:00
paweldomas
26cd2f17f6 ref(chat): port incoming chat msg sound to react 2018-03-13 16:57:28 -05:00
paweldomas
60e03e3dec feat: add join/leave sounds on mobile
Adds base/sounds feature which allows other features to register a sound
source under specified id. A new SoundsCollection component will then
render corresponding HTMLAudioElement for each such sound. Once "setRef"
callback is called by the HTMLAudioElement, this element will be added
to the Redux store. When that happens sound can be played through the
new 'playSound' action which will call play() method on the stored
HTMLAudioElement instance.
2018-03-13 16:57:28 -05:00
virtuacoplenny
bfb45ed0e8 fix(large-video): do not try to show background on safari with webrtc (#2606)
The animation for toggling filmstrip visibility was lagging on
Safari. Even though the background video is set to hidden, it is
still causing issues. Setting the background to display none
instead does help but might interfere with animations. So instead
do the easy thing and re-use logic used for Firefox to not show
the background video.
2018-03-13 14:37:35 -07:00
virtuacoplenny
e325199075 fix(invite): prefix a + when faking the validation response (#2597)
Pre-existing logic made it so numbers were assumed as valid
if no validation url was specified. To be consistent with
the validation server, the faked number should include a
+ at the beginning.
2018-03-12 13:25:42 -07:00
virtuacoplenny
4e4713c3e2 feat(invite): be able to call numbers from the invite dialog (#2555)
* feat(invite): be able to call numbers from the invite dialog

The major changes:
- Remove DialOutDialog, its views, redux hooks, css, and images.
  Its main functionality has been moved into AddPeopleDialog.
- Modify the AppPeopleDialog styling a bit so it is wider.
- Add phone numbers to AddPeopleDialog search results. Phone
  numbers are validated in parallel with the request for people
  and then appended to the result. The validation includes
  an ajax to validate the number is recognized as dialable by
  the server. The trigger for the validation is essentially if
  the entered input is numbers only.
- AddPeopleDialog holds onto the full object representation of
  an item selected in MultiSelectAutocomplete. This is so
  selected items can be removed on successful invite, leaving
  only unsuccessful items.
- More granular error handling on invite so individual invitees
  can be removed from the selected items list.

* squash: change load state, new regex for numbers

* squash: change strings, auto prepend 1 if no country code, add reminders
2018-03-12 12:23:40 -07:00
Saúl Ibarra Corretgé
ff8386e931 debian: fix setting the auth domain certificates
In 94813bc0fd (diff-6e9552c9bd8e61c8f277c21220160234)
two local variables got removed (AUTH_KEY_FILE and AUTH_CRT_FILE), which are used by the sed command
below to configure the virtualhost for auth.
2018-03-11 16:05:14 -05:00
Leonard Kim
8f520086e5 fix(info): do not show dial in numbers without a room specified
For the static page an error message displays stating no room
was specified. On mobile for unsupported browsers, the dial in
info will not show.
2018-03-09 17:18:10 -06:00
Shuai Li
5cde674eff fix(android): webrtc progurd rule
The new libwebrtc.jar contains an extra unused class file, when proguard is enabled result in the following warning:

org.chromium.build.BuildHooksAndroidImpl: can't find superclass or interface org.chromium.build.BuildHooksAndroid
2018-03-09 12:29:49 -08:00
Lyubo Marinov
c018252eee [Android] Fix RuntimeException in RNImmersiveModule
java.lang.RuntimeException: Tried to access a JS module before the React instance was fully set up. Calls to ReactContext#getJSModule should only happen once initialize() has been called on your native module.
	at com.facebook.react.bridge.ReactContext.getJSModule(ReactContext.java:102)
	at com.rnimmersive.RNImmersiveModule.emitImmersiveStateChangeEvent(RNImmersiveModule.java:74)
	at org.jitsi.meet.sdk.JitsiMeetView.onWindowFocusChanged(JitsiMeetView.java:504)
	at android.view.View.dispatchWindowFocusChanged(View.java:10257)
	at android.view.ViewGroup.dispatchWindowFocusChanged(ViewGroup.java:1193)
	at android.view.ViewGroup.dispatchWindowFocusChanged(ViewGroup.java:1197)
	at android.view.ViewGroup.dispatchWindowFocusChanged(ViewGroup.java:1197)
	at android.view.ViewGroup.dispatchWindowFocusChanged(ViewGroup.java:1197)
	at android.view.ViewGroup.dispatchWindowFocusChanged(ViewGroup.java:1197)
	at android.view.ViewGroup.dispatchWindowFocusChanged(ViewGroup.java:1197)
	at android.view.ViewGroup.dispatchWindowFocusChanged(ViewGroup.java:1197)
	at android.view.ViewRootImpl$ViewRootHandler.handleMessage(ViewRootImpl.java:3602)
	at android.os.Handler.dispatchMessage(Handler.java:102)
	at android.os.Looper.loop(Looper.java:154)
	at android.app.ActivityThread.main(ActivityThread.java:6119)
	at java.lang.reflect.Method.invoke(Native Method)
	at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:886)
	at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:776)
2018-03-09 13:50:07 -06:00
George Politis
c8cab1560c Merge pull request #2589 from jitsi/update-lib-jitsi-stats
Updates lib-jitsi-meet to d4b78721.
2018-03-09 12:44:53 -06:00
damencho
d218abfd97 Updates lib-jitsi-meet to d4b78721.
Implements the promised based getStats. Enables them for Safari and FF.
2018-03-09 12:03:01 -06:00
paweldomas
9e0fee6c7d fix(android): do not require java 8 target
Updates react-native-webrtc to get rid of Java 8 requirement for
the Android app.
2018-03-08 15:47:05 -06:00
damencho
5dca9e08f4 Bumps uglifyjs-webpack-plugin and its dependencies.
Solves a GitHub warning in lib-jitsi-meet about a vulnerability in a
uglifyjs-webpack-plugin dependency.
2018-03-08 15:12:15 -06:00
Lyubo Marinov
d3a1f7d4f7 [iOS] Fix uncaught NSInvalidArgumentException in RTCPeerConnection's createAnswer
WebRTC used to report createAnswer (and createOffer) NSError with key
"error". But now the key's called "NSLocalizedDescription".

Additionally, NSMutableDictionary doesn't accept nil.
2018-03-07 15:23:20 -06:00
Leonard Kim
80bdf908ca fix(info): always remove last part of path for meeting name 2018-03-06 15:22:27 -06:00
Leonard Kim
0d3b4eedf8 fix(info): make some text selectable for manual copying 2018-03-06 13:47:55 -06:00
Leonard Kim
824a8a8864 fix(info): respect path when linking to dial in page 2018-03-06 13:47:55 -06:00
virtuacoplenny
45c1438fe6 Merge pull request #2567 from jitsi/bgrozev-patch-1
doc: Add clarifying text to the top of the readme.
2018-03-06 11:29:25 -08:00
bgrozev
8caeabf6b4 doc: Add clarifying text to the top of the readme. 2018-03-06 11:45:11 -06:00
Leonard Kim
466561f99f fix(polyfills): implement createHTMLDocument for jquery 2018-03-06 10:46:53 -06:00
zbettenbuk
8dc866fab3 Fix setTimeout polyfill 2018-03-06 09:42:25 +01:00
George Politis
1c8b8e031b feat: Whitelists the gatherStats option. (#2561)
* feat: Whitelists the gatherStats option.

* doc: Replaces obsolete disableStats option with gatherStats.
2018-03-05 11:12:39 -06:00
Lyubo Marinov
796489dc77 Coding style: naming, consistency 2018-03-04 19:28:44 -06:00
Lyubo Marinov
a30412ba65 [RN] Automatically dispatch CONFERENCE_LEFT 2018-03-04 19:28:44 -06:00
Saúl Ibarra Corretgé
8b35ea8ad5 deps: update jquery version (#2441)
* deps: update jquery version

* squash: resize thumbnails after appending shared thumb

This forces jquery animate to show the thumbnail somehow...
Remote thumbnails basically work this way (append to filmstrip
and then resize filmstrip thumbnails) so I just copied that
implementation. ... So I admit I lost this fight because
even after looking at jquery I couldn't understand why
it doesn't work on the first resize but does on the second.
Plus I'm being put on a strict timebox to update jquery.

* squash: getJSON no longer supports .success
2018-03-02 21:20:47 -06:00
hristoterezov
e05f2a9027 chore(package.json): Update lib-jitsi-meet. 2018-03-02 21:19:16 -06:00
George Politis
0d5cc8898d chore(lib-jitsi-meet): Update version. 2018-03-02 16:33:04 -06:00
virtuacoplenny
7672a88990 fix(dial-in): remove console.warn used for debugging (#2547)
Looks like this guy snuck into the commit.
2018-03-01 15:50:23 -08:00
virtuacoplenny
5a45b52881 fix(hangup): destroy local tracks on conference leave (#2546)
The difference from this change and 88325ae is there is no
attempt to do this in redux. This is the safer change in that
the cleanup logic is known only to trigger on hangup.
2018-03-01 15:47:46 -08:00
Leonard Kim
ce6e8472f0 Revert "fix(hangup): destroy local tracks on conference leave (#2502)"
This reverts commit 88325aeef2.
Turns out a conference with a password triggers a failed conference
join. It's going to be tricky to decipher when to do actual
cleanup, and where to shove that code, so reverting is easier for
now.
2018-03-01 14:07:30 -06:00
Leonard Kim
b00aaf1de7 fix(dial-in): specify url root for more numbers link
This gets around the issue of a cdn page being opened.
2018-02-28 23:17:20 -06:00
Lyubo Marinov
e622829c1c [RN] Promised-base RTCPeerConnection API
Recent changes in lib-jitsi-meet probably led to (1) our
RTCPeerConnection customizations on react-native not being used which is
a problem because we need them for at least NAT64 on iOS in order to
pass the review in Apple's App Store and (2) unexpected exceptions
inside react-native-webrtc.

The Promise-based WebRTC API should be merged from react-native-webrtc's
upstream but I don't want to do it right now because last time we got
multiple bugs in addition.
2018-02-28 17:17:08 -06:00
Lyubo Marinov
037e7f59b0 [RN] Fix a TypeError when invoking humanize() on undefined 2018-02-28 17:17:07 -06:00
hristoterezov
df754f4f41 fix(reload): Preserve URL params on reload/redirect. 2018-02-28 14:28:56 -06:00
George Politis
fd0749000e feat: Whitelists the iceTransportPolicy option. (#2535) 2018-02-28 11:28:47 -08:00
Lyubo Marinov
d727ee80b2 [RN] Fix base/profile and recent-list bugs 2018-02-27 20:52:34 -06:00
zbettenbuk
e4da0e988e Split storage keys to features 2018-02-27 07:33:33 -06:00
zbettenbuk
1474304cc5 Add the ability to do partial updates on the flatten profile object 2018-02-27 07:33:33 -06:00
zbettenbuk
d02ab2c641 Flatten the store of the profile feature 2018-02-27 07:33:33 -06:00
zbettenbuk
0e07020d09 Flatten the store of the recent-list feature 2018-02-27 07:33:33 -06:00
zbettenbuk
e0deb6d64b Prepare PersistenceRegistry for flat subtrees 2018-02-27 07:33:33 -06:00
virtuacoplenny
88325aeef2 fix(hangup): destroy local tracks on conference leave (#2502)
Destroy local tracks and also destroy large video so the
user does not wonder why camera (and mic) are still enabled
even though hangup has been pressed.
2018-02-26 21:10:49 -08:00
Lyubo Marinov
9f69c4d730 Grow features/settings from features/app-settings and features/settings-menu 2018-02-26 19:19:01 -06:00
zbettenbuk
e23d4317eb Add hint box with dynamic join button 2018-02-26 18:39:48 -06:00
zbettenbuk
547ddee3a5 Dismiss keyboard on menu open 2018-02-26 18:39:48 -06:00
zbettenbuk
3cf9fd439b Add iOS 10 compatibility header padding 2018-02-26 18:39:48 -06:00
zbettenbuk
7cd40353e7 Remove android view clipping fix from welcome page 2018-02-26 18:39:48 -06:00
zbettenbuk
04690dfc8f Facelift Welcome screen 2018-02-26 18:39:48 -06:00
zbettenbuk
9a9890f86c Introduce SafeArea for Settings and Header 2018-02-26 18:35:13 -06:00
Leonard Kim
9b04a7852a fix(welcome-page): send analytics on join 2018-02-26 18:41:47 -05:00
Emil Ivov
df9d17ba18 Merge pull request #2523 from bgrozev/whitelist-ss-fps
config: Whitelists the desktopSharingFrameRate config key.
2018-02-26 13:18:20 -06:00
Boris Grozev
5d0ac7653d config: Whitelists the desktopSharingFrameRate config key. 2018-02-26 11:45:42 -06:00
virtuacoplenny
1ef2e2ee7e Merge pull request #2503 from jitsi/ss_fps
feat(ss_framerate): Add config option for min/max frame rate.
2018-02-23 12:28:48 -08:00
hristoterezov
b3431ab3e7 chore(lib-jitsi-meet): Update version. 2018-02-23 13:38:41 -06:00
Leonard Kim
6fbe78eb34 fix(welcome-page): change font family and spacing 2018-02-23 11:35:02 -06:00
Lyubo Marinov
b8de5bbfc3 [RN] Add Picture-in-Picture support (Coding style: naming, consistency) 2018-02-23 11:21:26 -06:00
Saúl Ibarra Corretgé
b3683068d4 [RN] Add Picture-in-Picture support
This only works automatically on Android >= 8. On other platforms / versions, it
relies on the SDK user on implementing a "reduced UI" mode and reacting to the
"request PIP" delegate method.
2018-02-23 11:21:25 -06:00
Lyubo Marinov
94473e5660 [Android] Allow accessing react-native's in-app developer menu (in the emulator) 2018-02-23 11:21:25 -06:00
virtuacoplenny
7f78050513 Merge pull request #2434 from slavakisel/external-notification-screen-sharing
Implement external API notification about screen sharing status
2018-02-22 17:39:03 -08:00
hristoterezov
2d9b906a3b feat(ss_framerate): Add config option for min/max frame rate. 2018-02-22 19:37:17 -06:00
Leonard Kim
1f82ce3d19 feat(unsupported-browser): show dial-in for mobile
- Move the existing components for the static dial in page into
  a separate folder for easier reuse.
- Reuse those components for displaying dial-on numbers on the
  mobile page for unsupported browsers.
- Modify those components to support having tel protocol
  links on the dial-in numbers.
- Have DialInSummary, formerly DialInInfoPage, respect a
  passed in className prop for easier styling differences.
2018-02-22 17:29:03 -06:00
Leonard Kim
68b710a222 fix(dial-in): allow text select in numbers page 2018-02-22 17:29:03 -06:00
brian baldino
9fea5e89b3 don't show 'user has left' notification for hidden users 2018-02-22 13:41:24 -06:00
Slava Kisel
e1d849e3a0 Implement external API notification about screen sharing status 2018-02-22 10:25:03 +03:00
virtuacoplenny
74a92f83c7 feat(welcome): new design (#2492)
* feat(welcome): new design

* squash: update strings

* squash: copy/paste error?

* squash: remove welcome page disabling checks

* squash: change strings again

* squash: background var

* squash: title and desc css as variables
2018-02-21 22:58:55 -06:00
virtuacoplenny
e47802538e ref(invite): remove InviteDialog (#2483)
* ref(invite): remove InviteDialog

InviteDialog functionality has been moved into InfoDialog.
The InviteButton has been temporarily hacked to show one
of its dropdown options instead as the button. Future
work will bring in a redesigned InviteModal that the button
will open.

* squash: filter invalid options and map valid options

* squash: update strings
2018-02-17 13:53:39 -06:00
Lyubo Marinov
e2cf7a788d [RN] Make full-screen more resilient on Android (Coding style: consistency) 2018-02-14 12:28:22 -06:00
Saúl Ibarra Corretgé
4757c1ebca [RN] Make full-screen more resilient on Android
On Android we go into "immersive mode" when in a conference, this is our way of
being full-creen. There are occasions, however, in which Android takes us out of
immerfive mode without us (the application / SDK) knowing: when a child activity
is started, a modal window shown, etc.

In order to be resilient to any possible change in the immersive mode, register
a listener which will be called when Android changes it, so we can re-eavluate
if we need it and thus re-enable it.
2018-02-13 15:00:36 -06:00
virtuacoplenny
59d046dca9 feat(info): new dialog design (#2452)
* feat(info): new dialog design

- Add display of a dial in number.
- Add a static page to show a full list of dial in numbers.
- Add password management.
- Invite modal will be changed soon to remove password and
  dial-in.

* squash: add classes for torture tests

* squash: class for local lock for torture tests

* squash: more classes for torture tests

* squash: more classes, work around linter

* squash: remove unused string?

* squash: work around linter and avoid react warnings

* squash: pixel push, add bold

* squash: font size bump

* squash: NumbersTable -> NumbersList

* squash: document response from fetching numbers

* squash: showEdit -> editEnabled, pixel push padding for alignment

* squash: pin -> conferenceID

* squash: prepare to receive defaultCountry from api
2018-02-13 13:46:47 -06:00
Lyubo Marinov
0bbcd3181c [RN] Adjust Conference for the reduced UI mode (Coding style) 2018-02-13 13:24:10 -06:00
Saúl Ibarra Corretgé
7a9ff9975a [RN] Adjust Conference for the reduced UI mode 2018-02-13 11:59:12 -06:00
Lyubo Marinov
10f72f8e40 [RN] Unpin participant and set last N to 1 if the filmstrip is disabled (Coding style: consistency) 2018-02-13 11:58:26 -06:00
Saúl Ibarra Corretgé
417e1e83e7 [RN] Unpin participant and set last N to 1 if the filmstrip is disabled 2018-02-13 09:58:44 -06:00
Lyubo Marinov
cacc4bd769 [RN] Dynamically adjust LargeView's Avatar to available size (Coding style: comments, flow)
Flow caught an incorrect function call.
2018-02-13 09:58:43 -06:00
Saúl Ibarra Corretgé
1419247801 [RN] Dynamically adjust LargeView's Avatar to available size
When in PiP mode the LargeView will not be large enough to hold the avatar (for
those interested in the details, our avatar's size is 200, and in PiP mode the
app is resized to about 150).

In order to solve it, this PR refactors how the avatar style is passed along,
reducing it to a single "size" prop. With this only prop, the Avatar compononent
will compute the width, height and borderRadius, plus deal with some Android
shenanigans.

In addition, the LargeView component now uses DimensionsDetector to check its
own size and adjust the size prop passed to the Avatar component as needed.
2018-02-13 09:58:43 -06:00
virtuacoplenny
4fb37c38eb fix(large-video): do not show background for Firefox and temasys (#2316)
* ref(large-video): reactify background

This is pre-requisite work for disabling the background on
certain browsers, namely Firefox. By moving the component
to react, and in general encapsulating background logic,
selectively disabling the background will be easier.

The component was left for LargeVideo to update so it can
continue to coordinate update timing with the actual large
video display. If the background were moved completely into
react and redux with LargeVideo, then background updates would
occur before large video updates causing visual jank.

* fix(large-video): do not show background for Firefox and temasys

Firefox has performance issues with adding filter effects on
animated elements. On temasys, the background videos weren't
really displaying anyway.

* some props refactoring

Instead of passing in classes to LargeVideoBackground, rely on
explicit props. At some point LargeVideo will have to be reactified
and the relationsihp between it and LargeVideoBackground might
change, so for now make use of props to be explicit about
how LargeVideoBackground can be modified.

Also, set the jitsiTrack to display on LargeVideoBackground to
null if the background is not displayed. This was an existing
optimization, although previously done with pausing and playing.

* squash: use newly exposed RTCBrowserType

* squash: rebase and use new lib browser util

* squash: move hiding logic all into LargeVideo

* squash: remove hiding of background on stream change. hopefully doesnt break anything
2018-02-12 16:29:29 -08:00
Leonard Kim
f3b5ed2ef4 ref(notifications): convert Thank You message to a notification 2018-02-12 17:53:29 -06:00
Leonard Kim
7341c7bf84 ref(notifications): stop passing around Notifications component
Passing around of the component was used when there were two
independent Notification components. Now that there is only
one Notification component, it is not necessary to pass
around the component.
2018-02-12 17:53:29 -06:00
Leonard Kim
5d31532cbb fix(chat): return formatted body to show smileys 2018-02-12 15:34:21 -07:00
virtuacoplenny
423c8d3f53 Merge pull request #2479 from bgrozev/ga-tweaks
Ga tweaks
2018-02-12 12:35:23 -08:00
Boris Grozev
a1ba7beff9 feat: Do not include the callstats name in google analytics. 2018-02-12 14:00:15 -06:00
Boris Grozev
03fc711e81 feat: Makes the google analytics tracking id configurable. 2018-02-12 14:00:04 -06:00
Lyubo Marinov
a370a88d19 [RN] Add ability to enable /disable the toolbox (Coding style: comments, consistency) 2018-02-12 11:53:42 -06:00
Saúl Ibarra Corretgé
7153d94dad [RN] Add ability to enable /disable the toolbox 2018-02-12 11:52:54 -06:00
Lyubo Marinov
240fff74c7 [RN] Add ability to enable / disable the filmstrip (Coding style: comments, naming) 2018-02-12 11:52:46 -06:00
Saúl Ibarra Corretgé
7bd8b7948f [RN] Add ability to enable / disable the filmstrip
This is only implemented for mobile at the moment, since web doesn't handle
visibility within the Filmstrip component yet, so this should be added right
then, too.
2018-02-12 10:02:34 -06:00
Дамян Минков
a505c01e9e Update uninstall documentation.
The package jitsi-meet-prosody was missing from the list of packages.
2018-02-09 10:28:01 +01:00
damencho
990b1eddf2 Adds strophe.js and plugin-disco as a dependency to fix build problem.
Bumps lib-jitsi-meet to latest. There was a problem that jitsi-meet build fail if anybody touches package.json (including PR testing), this happen after start using custom strophe.js from github:jitsi/strophejs.
The error:
    ERROR in ../strophejs-plugin-disco/lib/strophe.disco.js
    Module not found: Error: Can't resolve 'strophe.js' in '/Users/dminkov/dev/jitsi-meet/node_modules/strophejs-plugin-disco/lib'
     @ ../strophejs-plugin-disco/lib/strophe.disco.js 4:126-147 4:196-227
     @ ./modules/xmpp/xmpp.js
     @ ./JitsiConnection.js
     @ ./JitsiMeetJS.js
     @ ./index.js

Without strophejs-plugin-disco jitsi-meet builds but on runtime loading fail with:
Error: Missing strophe-plugins (disco plugin is required)!

FIXME: We should remove this once strophe.js releases new version and we are back to the official one inside lib-jitsi-meet.
2018-02-08 23:50:45 -06:00
damencho
abbfd3de9a Adds strophe.js as a dependency to fix build problem.
Bumps lib-jitsi-meet to latest. There was a problem that jitsi-meet build fail if anybody touches package.json (including PR testing), this happen after start using custom strophe.js from github:jitsi/strophejs.
The error:
    ERROR in ../strophejs-plugin-disco/lib/strophe.disco.js
    Module not found: Error: Can't resolve 'strophe.js' in '/Users/dminkov/dev/jitsi-meet/node_modules/strophejs-plugin-disco/lib'
     @ ../strophejs-plugin-disco/lib/strophe.disco.js 4:126-147 4:196-227
     @ ./modules/xmpp/xmpp.js
     @ ./JitsiConnection.js
     @ ./JitsiMeetJS.js
     @ ./index.js

FIXME: We should remove this once strophe.js releases new version and we are back to the official one inside lib-jitsi-meet.
2018-02-08 22:48:25 -06:00
Saúl Ibarra Corretgé
bd301403c4 [RN] Fix app startup from a CallKit intent
Story time.  Currently the app can be started in 4 ways:

- just tapping on the icon
- via a deep link
- via a universal link
- via the phone's recent calls list

The last 3 options will make the app join the specified room upon launch. React
Native's Linking module implements the necessary bits to handle deep or
universal linking, but CallKit is out of its scope.

In order to blend any type of app startup mode, a new LaunchOptions module (iOS
only) exports a getInitialURL function, akin to the one in the Linking module,
but taking CallKit instents into consideration. This function is then used to
make app startup with a URL consistent across all different modes.
2018-02-07 10:12:10 -06:00
bgrozev
d481c6f736 chore: Updates lib-jitsi-meet to 5f8c0a662af086e7bcc19c010f1129afc9b6… (#2460)
* chore: Updates lib-jitsi-meet to 5f8c0a662af086e7bcc19c010f1129afc9b6d650

* squash: revert changes to package-lock.json except for the lib-jitsi-meet version change.
2018-02-06 21:21:39 -07:00
Дамян Минков
ba94ba30c5 Handles connection failed event details (passing them to analytics). (#2432)
* Handles connection failed event details (passing them to analytics).

* Fixing comments.

* Updates depending versions to be able to test.

* Fixing comments.

* Fixes wrong jsdoc.
2018-02-06 14:54:21 -08:00
Saúl Ibarra Corretgé
5305557ce5 [RN] Add a "reduced UI" mode
It's detected based on a size threshold.
2018-02-06 15:53:52 -06:00
Lyubo Marinov
c9d8b5c827 Finally! Let there be... responsive-ui!
We started on the way to responsive UI and its design with aspect ratio
and keeping the filmstrip on the short side of the app's visible
rectangle.

Shortly, we're going to introduce reduced UI for Picture-in-Picture. And
that's where we'll need another dimensions-based detector akin to the
aspect ratio detector.

While the AspectRatioDetector, the up-and-coming ReducedUIDetector, and
their base DimensionsDetector are definitely separate abstractions and
implementations not mixed for the purposes of easy extensibility and
maintenance, the three of them are our building blocks on top of which
we'll build our responsive UI.
2018-02-06 15:53:27 -06:00
Saúl Ibarra Corretgé
0ad1c88cd2 [RN] Refactor AspectRatioDetector
Factor out the dimensions detection login into a DimensionsDetector component.
2018-02-06 11:21:12 -06:00
Saúl Ibarra Corretgé
78fbfba573 [iOS] Fix initial CallKit muted state
Turns out this was a bit more involved than I originally thought due to an
interesting (corner) case: IFF the user was never asked about microphone
permissions and the call starts with audio muted, unmuting from the CallKit
interface won't work (iOS won't show the prompt, it fails immediately) and we
need to sync the mute state back.
2018-02-06 10:24:06 -06:00
Saúl Ibarra Corretgé
9e53d40b9c [RN] Honor filmstrip visibility state 2018-02-05 15:55:05 -06:00
Lyubo Marinov
aa314c10ac Coding style: consistent naming, one name per abstraction
Instead of having visible and visibility and setToolboxVisible and
setFilmstripVisibility, have only visible as a name.
2018-02-05 15:55:04 -06:00
Lyubo Marinov
62c9762793 [RN] Protect AbstractApp and localStorage initialization 2018-02-05 15:26:01 -06:00
Lyubo Marinov
d7dddb2509 Introduce base/storage to represent the Web Storage API and persistence-related customizations 2018-02-02 15:13:26 -06:00
Lyubo Marinov
83243d5980 [RN] Fix legacy recent-list storage 2018-02-02 15:13:26 -06:00
Zoltan Bettenbuk
6e05cab46e [RN] Fix legacy recent-list storage 2018-02-02 15:13:26 -06:00
Lyubo Marinov
7954d5fd39 Coding style 2018-02-02 15:13:26 -06:00
zbettenbuk
158cadf4f9 Improve persistency layer 2018-02-02 15:13:26 -06:00
Lyubo Marinov
f35578c803 [RN] Polyfill __filename ASAP 2018-02-02 15:13:26 -06:00
Saúl Ibarra Corretgé
c087e90099 [RN] Fix setReceivedVideoQuality if we are not yet in a conference
It may happen that such action is fired while joining.
2018-02-02 14:33:49 -06:00
Saúl Ibarra Corretgé
da0ae73d10 [RN] Fix pinParticipant if we are not yet in a conference
It may happen that such action is fired while joining.
2018-02-02 14:32:15 -06:00
Saúl Ibarra Corretgé
b4d44f367d [RN] aspect-ratio: preserve mode when width === height
If the view gets resized to a 1:1 aspect ratio, remember the previous mode to
avoid flickering when going back to a larger size or different aspect ratio.
2018-02-02 14:19:08 -06:00
hristoterezov
083f6b400b chore(capabilities.json): deploy 2018-02-01 17:21:52 -06:00
Saúl Ibarra Corretgé
dd5ae49217 Merge pull request #2407 from zbettenbuk/new-welcome-screen
Add URL validation and larger distance behind the back button
2018-01-31 16:26:09 +01:00
zbettenbuk
6a9e6db3be [RN] Validate the URL in app-settings 2018-01-31 16:06:24 +01:00
virtuacoplenny
c4468cb7b8 chore(deps): update lib-jitsi-meet for connection quality logging (#2436) 2018-01-30 14:52:25 -08:00
Leonard Kim
80c4205fb8 chore(deps): update lib-jitsi-meet for ie11 browser caps fix 2018-01-29 16:16:21 -06:00
zbettenbuk
aa9efd6f69 [RN] Improve app-settings back button style 2018-01-29 10:58:46 +01:00
Piérre Reimertz
6f8f64ba48 [iOS] Fix crash if the app display name is not set
Fixes: #2377 #2267 #2158
2018-01-29 10:34:01 +01:00
Leonard Kim
1c3cef1eed fix(notifications): reduce duration of initially muted notification
The current notification for starting muted is 2 minutes, which
may seem like "forever" so reduce it to dismiss faster.
2018-01-28 18:48:56 -06:00
Leonard Kim
2720c76e4d fix(password): do not let guests edit password when roles are enabled
If config.enableUserRolesBasedOnToken is true, only let moderators
and non-guests modify the password. Otherwise, only let moderators
edit the password.
2018-01-28 18:48:24 -06:00
virtuacoplenny
4ab34589c8 Merge pull request #2431 from jitsi/recommended_browsers_link
fix(recommended-browsers): Fix link
2018-01-28 13:41:54 -08:00
hristoterezov
ed36132e94 fix(recommended-browsers): Fix link 2018-01-28 11:51:08 -06:00
virtuacoplenny
f43687944c Merge pull request #2429 from jitsi/fix_chromium
chore(lib-jitsi-meet): Update the version.
2018-01-27 11:45:46 -08:00
hristoterezov
dda0ea0ba9 chore(lib-jitsi-meet): Update the version. 2018-01-27 13:02:46 -06:00
Lyubo Marinov
e1f967869a [RN] Add builtin translations 2018-01-26 12:18:43 -06:00
Saúl Ibarra Corretgé
8673083829 [RN] Add builtin translations
Load all of them as imports, so the packager includes them in the bundle. Then
register them with the i18next library.
2018-01-26 16:27:33 +01:00
Lyubo Marinov
b52e584327 "feat(TPC): append TPC ID to stream IDs" & "fix(RTC): protect from counter overflow" 2018-01-25 11:21:40 -06:00
hristoterezov
4c65262a87 fix(browser-caps): Deploy. 2018-01-25 10:44:24 -06:00
bgrozev
7ce670df0c doc: Add -f to update-ca-certificates 2018-01-25 10:42:43 -06:00
Boris Grozev
f5f341ca9e npm: Updates lib-jitsi-meet to e895c9b86f57a288f644dcc61f81771034b932da. 2018-01-24 14:15:52 -06:00
Lyubo Marinov
f29fbb6757 [iOS] WebRTC 63 with 2 backports to fix a crash 2018-01-24 13:37:54 -06:00
virtuacoplenny
e5e3c6c6c4 Merge pull request #2410 from bgrozev/set-product
feat: Sets the "product" field in the analytics handler constructor.
2018-01-23 15:25:59 -08:00
Boris Grozev
dc92fb5073 feat: Sets the "product" field in the analytics handler constructor. 2018-01-23 16:14:31 -06:00
damencho
2478176f23 Adds uiLoaded event in iframe API, fired when all resources are loaded. 2018-01-23 15:43:49 -06:00
virtuacoplenny
12ec982067 Merge pull request #2400 from jitsi/browser_caps2
fix(lib-jitsi-meet): RTCBrowserType -> browser.
2018-01-22 13:57:50 -08:00
hristoterezov
c9e3e5052d fix(lib-jitsi-meet): RTCBrowserType -> browser. 2018-01-22 15:56:06 -06:00
Emil Ivov
22401614a7 Merge pull request #2401 from virtuacoplenny/lenny/spot-feedback-api
feat(api): expose a way to submit feedback
2018-01-19 16:57:18 -06:00
Leonard Kim
762f529f1d feat(api): expose a way to submit feedback
Spot will need a way to submit call feedback using the iframe
api. For now expose a method on conference.js to submit that
feedback. Exposing on conference.js looks to be the existing
pattern... Also add an event to notify consumers of the iframe
api that feedback was submitted, as postMessage is async
and the notification can at least give some guarantee maybe.

I haven't updated documentation yet as I'm not confident
about this api.
2018-01-19 14:27:44 -08:00
Saúl Ibarra Corretgé
1f6b743bec [RN] Join room when pressing "go" on the keyboard
Improve the experience when joining a room by removing the need to tap the join
button. The keyboard type has also been set to "go", which translated on the
builtin keyboard button label to be "go" (it's builtin, the operating system
translates it). This works on both Android and iOS.
2018-01-19 16:10:51 -06:00
Lyubo Marinov
48f4317adb [RN] Make video track fade-in effect cross-platform 2018-01-19 16:05:59 -06:00
Saúl Ibarra Corretgé
75f6786588 [RN] Make video track fade-in effect cross-platform
Android uses a SurfaceView to render video, which is not quite a View, so the
fade-in animation (which varies the opacity) doesn't work.

Instead, add an opaque black view covering the video, which transitions to
transparent. This creates much smoother transitions on Android, while behaving
the same.

In addition, I removed the flip animation for local tracks, which is no longer
used, since the camera is switched without changing tracks.
2018-01-19 15:32:17 -06:00
Lyubo Marinov
3ec4d67a99 [RN] Strip spaces when parsing URLs 2018-01-19 15:26:13 -06:00
Saúl Ibarra Corretgé
a23eec55e8 [RN] Strip spaces when parsing URLs 2018-01-19 15:14:51 -06:00
Lyubo Marinov
bdf2ecfe4b [iOS] CocoaPods 1.4.0 2018-01-19 15:00:18 -06:00
Lyubo Marinov
fc36759114 [RN] WebRTC 63 2018-01-19 14:56:58 -06:00
Saúl Ibarra Corretgé
9c2849a663 [Android] Enable Java 1.8 compatibility support
It was recently introduced in WebRTC, so we we need to enable it project wide.
As for what features are supportd, see:
https://developer.android.com/studio/write/java8-support.html
2018-01-19 14:05:25 -06:00
Saúl Ibarra Corretgé
98ff20a026 [RN] Simplify initialization of AsyncStorage 2018-01-19 09:41:34 -06:00
Lyubo Marinov
b04661b40b [RN] Revert unintentional disabling of the yellow box 2018-01-18 21:11:24 -06:00
Lyubo Marinov
112c856850 Fix settings screen layout on iOS and add soft back button 2018-01-18 15:45:25 -06:00
zbettenbuk
410dc132e1 Fix settings screen layout on iOS and add soft back button 2018-01-18 10:06:26 -06:00
Saúl Ibarra Corretgé
b7f950f5f7 feat(analytics): shield sending analytics events
Any failure in analytics should not prevent the natural flow of the code. Shield
the function by catching and logging any exception.
2018-01-17 16:46:54 -06:00
Paweł Domas
7ad875e735 fix(RN logging): sync with logging_config.js (#2382) 2018-01-17 10:59:48 -08:00
Saúl Ibarra Corretgé
41aa704e1f [RN] Update React Native to version 0.51.0 2018-01-11 11:04:28 -06:00
Saúl Ibarra Corretgé
e00ea353e8 Merge pull request #2380 from saghul/app-settings-kbd
[RN] Use the "email" keyboard for the email field
2018-01-10 15:52:27 +01:00
Saúl Ibarra Corretgé
6f93424d7c [RN] Use the "email" keyboard for the email field 2018-01-10 14:30:34 +01:00
Saúl Ibarra Corretgé
292f3ab1bd [Android] Fix crash if settings activity cannot be opened
The documentation states this is possible, so make sure we handle such errors.

Ref:
https://developer.android.com/reference/android/provider/Settings.html#ACTION_APPLICATION_DETAILS_SETTINGS
2018-01-09 13:12:53 -06:00
Boris Grozev
a3cb081609 fix: Fixes an exception when the chat button and shortcut are clicked. 2018-01-09 10:36:55 -08:00
Leonard Kim
64c5ae1c48 fix(close): use string concatenation for ie11 2018-01-08 16:26:54 -06:00
bgrozev
259004b8bf fix: Fixes the user ID read from JWT. (#2366) 2018-01-08 11:27:08 -06:00
ibauersachs
4fea22676b Commit from translate.jitsi.org by user ibauersachs.: 410 of 410 strings translated (0 fuzzy). 2018-01-08 16:03:42 +00:00
zbettenbuk
05a492241f Fix local participant details on web 2018-01-05 12:58:58 -06:00
virtuacoplenny
8ec4697a27 Merge pull request #2353 from jitsi/suboptimal_experience
feat(notification): Add suboptimal browser exp notification.
2018-01-04 14:36:58 -08:00
hristoterezov
a357b0cf14 feat(notification): Add suboptimal browser exp notification. 2018-01-04 15:57:17 -06:00
virtuacoplenny
9eff669b0b Merge pull request #2357 from bgrozev/analytics-update
Analytics update
2018-01-04 12:32:07 -08:00
Boris Grozev
c7714959e6 feat: Passes the environment type and subproduct to the analytics handler constructor. 2018-01-04 13:12:48 -06:00
Boris Grozev
e898527294 feat: Passes the "group" from JWT to the analytics handler constructor. 2018-01-04 13:12:48 -06:00
zbettenbuk
bfcd34358b [RN] Add app-settings feature
[RN] Fix PR feedbacks, write persistency docs
2018-01-04 12:53:29 -06:00
bbaldino
871ef9ff0e change TPC logs to info by default 2018-01-04 08:14:40 -06:00
Saúl Ibarra Corretgé
178c8e02ff [RN] Disable the XHR backend on mobile
All language assets will need to be bundled.
2018-01-03 19:18:12 -06:00
bgrozev
43ac039fd6 fix: Adapts to changes in lib-jitsi-meet. (#2354) 2018-01-03 16:07:39 -08:00
bgrozev
090f2f9ccb Restructures the analytics events (#2333)
* ref: Restructures the pinned/unpinned events.

* ref: Refactors the "audio only disabled" event.

* ref: Refactors the "stream switch delay" event.

* ref: Refactors the "select participant failed" event.

* ref: Refactors the "initially muted" events.

* ref: Refactors the screen sharing started/stopped events.

* ref: Restructures the "device list changed" events.

* ref: Restructures the "shared video" events.

* ref: Restructures the "start muted" events.

* ref: Restructures the "start audio only" event.

* ref: Restructures the "sync track state" event.

* ref: Restructures the "callkit" events.

* ref: Restructures the "replace track".

* ref: Restructures keyboard shortcuts events.

* ref: Restructures most of the toolbar events.

* ref: Refactors the API events.

* ref: Restructures the video quality, profile button and invite dialog events.

* ref: Refactors the "device changed" events.

* ref: Refactors the page reload event.

* ref: Removes an unused function.

* ref: Removes a method which is needlessly exposed under a different name.

* ref: Refactors the events from the remote video menu.

* ref: Refactors the events from the profile pane.

* ref: Restructures the recording-related events.

Removes events fired when recording with something other than jibri
(which isn't currently supported anyway).

* ref: Cleans up AnalyticsEvents.js.

* ref: Removes an unused function and adds documentation.

* feat: Adds events for all API calls.

* fix: Addresses feedback.

* fix: Brings back mistakenly removed code.

* fix: Simplifies code and fixes a bug in toggleFilmstrip

when the 'visible' parameter is defined.

* feat: Removes the resolution change application log.

* ref: Uses consistent naming for events' attributes.

Uses "_" as a separator instead of camel case or ".".

* ref: Don't add the user agent and conference name

as permanent properties. The library does this on its own now.

* ref: Adapts the GA handler to changes in lib-jitsi-meet.

* ref: Removes unused fields from the analytics handler initializaiton.

* ref: Renames the google analytics file and add docs.

* fix: Fixes the push-to-talk events and logs.

* npm: Updates lib-jitsi-meet to 515374c8d383cb17df8ed76427e6f0fb5ea6ff1e.

* fix: Fixes a recently introduced bug in the google analytics handler.

* ref: Uses "value" instead of "delay" since this is friendlier to GA.
2018-01-03 13:24:07 -08:00
zbettenbuk
d08bbae770 [RN] Add proper locale support to MomentJS 2018-01-03 10:13:15 -06:00
Дамян Минков
30b51ff384 Adds warning to manual-install doc. 2018-01-02 17:18:06 -06:00
ibauersachs
c109199e06 Commit from translate.jitsi.org by user ibauersachs.: 409 of 410 strings translated (0 fuzzy). 2017-12-29 15:21:18 +00:00
ibauersachs
0ed31f0ae8 Commit from translate.jitsi.org by user ibauersachs.: 399 of 399 strings translated (0 fuzzy). 2017-12-29 15:01:39 +00:00
jitsi-pootle
006e6cc851 New files added from translate.jitsi.org based on templates 2017-12-28 23:44:49 +00:00
Leonard Kim
0680c086df chore(deps): update lib-jitsi-meet for ie11 stringify failure 2017-12-28 14:26:35 -06:00
Leonard Kim
698ec1e2d7 Revert "feat(avatars): use initials service for getting images (#2312)"
There is more avatar work coming down the line for mobile,
which should also affect web, assuming the same getAvatarURL
helper will be used. As such, instead of continuing to
support the initials service and tweaking UI, revert to
make way for the future avatar work.

This reverts commit 2ea5ad68a5.
2017-12-28 14:17:33 -06:00
Leonard Kim
e217c172f8 ref(toolbar): re-wrap buttons for torture tests
The inline classes for the toolbars were re-arranged
to fix non-rounded corners in the always-on-top window's
toolbar. However, those classes were also used by the
torture tests as a way to find stable elements that will
not get blown away by a react re-render. So re-wrap the
buttons with a div that will not get blown away,
add back the inline classes to those divs, and change
the CSS to round the corners in the always-on-top
window's toolbar.
2017-12-26 16:08:40 -06:00
jitsi-pootle
6146c12533 New files added from translate.jitsi.org based on templates 2017-12-26 20:48:41 +00:00
damencho
eb64b74493 Commit from translate.jitsi.org by user damencho.: 399 of 399 strings translated (0 fuzzy). 2017-12-26 20:47:35 +00:00
bgrozev
1255b3349b doc: Adds a note on security (as suggested in #409). (#2322) 2017-12-26 10:49:46 -08:00
virtuacoplenny
2ea5ad68a5 feat(avatars): use initials service for getting images (#2312)
* feat(avatars): use initial service for getting images

* squash: capitalize and minor refactor of string concat
2017-12-21 13:36:00 -06:00
Lyubo Marinov
fb6f1bdba0 [RN] Accommodate iPhone X on the WelcomePage 2017-12-21 00:02:22 -06:00
Lyubo Marinov
25b130f8e8 [RN] Don't tint the children, tint the background only 2017-12-21 00:00:34 -06:00
Lyubo Marinov
9591cb54a2 [iOS] 1024x1024 AppIcon required by Apple 2017-12-20 12:38:11 -06:00
Saúl Ibarra Corretgé
ca78309427 Fix typo 2017-12-20 10:58:49 +01:00
Lyubo Marinov
65abd5efd4 [iOS] Synthesize IPv6 addresses closer to Apple's recommendation 2017-12-19 19:15:34 -06:00
Lyubo Marinov
05de599739 [iOS] Update projects to Xcode recommended settings 2017-12-19 19:15:34 -06:00
Lyubo Marinov
1e0550c746 [RN] Add recent-list feature 2017-12-19 19:15:01 -06:00
Zoltan Bettenbuk
45c405de0e [RN] Add recent-list feature 2017-12-19 18:35:51 -06:00
Leonard Kim
3aedce11f2 fix(filmstrip): prevent error on updating indicators for shared video
Shared video (youtube videos) do not have indicator icons about
dominant speaker and raised hand. Add a check to see if the
indicator icon container exists before trying to attach react
icons to it. The error thrown didn't seem to be causing any
UI issues though.

While this truthy check before doing ReactDOM.render seems
like it should be a general practice, I'm hesistatnt to make
the change broadly because it hasn't been a problem so far.
2017-12-19 17:14:42 -06:00
Leonard Kim
f0a180cf0c fix(display-name): listen for display name changes
Make sure participants in the redux store have updated names.
This will be needed for showing avatars with user initials.
2017-12-19 17:13:10 -06:00
virtuacoplenny
28013f6ffa ref(avatars): remove Avatar.js (#2289)
* ref(avatars): remove Avatar.js

- Rely on redux getting updated with new participant state
and any calls to getAvatarURL passing in the redux
participant state. This way the state within Avatar.js can
be removed.
- Clean up methods on UI.js. Because all state is in the
store, separate methods for updating the avatar aren't as
necessary. Instead centralize accessing of the avatar for
components outside of redux and centralize the call to
update avatars for non-react components.
- Controversial: cache a participant's avatarURL on the
participant state. Currently the participant's avatarURL
that is generated without jwt (which sets the avatarURL directly)
is not cached. Without cache, there can be many redundant
calls to APP.API.notifyAvatarChanged.

* Leverage middleware timing to diff avatars

One alternative implementation is to leverage middleware's
ability to intercept updates before and after redux has
upated and then compare avatarURLs.

* kill UI.getAvatarUrl

* profile button sets its own avatar url (solves update timing)

* remove calls to updating avatar outside of middleware

* update UI.js doc

* remove left over logic from initial implementation

* try to move local user fallback into selector func

* default to id 'local' in selector
2017-12-19 17:11:54 -06:00
Saúl Ibarra Corretgé
5640524647 [RN] Show an indication when connectivity problems occur
The video will switch to the avatar and be tinted with gray. On the large view,
a text message indicating the user has connectivity issues will be shown.
2017-12-19 09:10:58 -06:00
Saúl Ibarra Corretgé
ac09233558 [RN] Add TintedView component
It's designed to cover a container and give it a "tint" by using a color and
opacity.
2017-12-19 09:10:58 -06:00
Saúl Ibarra Corretgé
9a3f98a4a0 Merge pull request #2256 from jitsi/wifistats
[Android] WiFi stats for mobile
2017-12-19 11:10:27 +01:00
damencho
2f3ea1b458 [Android] Add module that provides getWiFiStats 2017-12-19 11:07:11 +01:00
Leonard Kim
ceeefb33c1 fix(display-name): allow editing only if guest 2017-12-18 23:16:38 -06:00
hristoterezov
d6c3ab64fa fix(aot): Unmount AlwaysOnTop to remove listeners (#2307) 2017-12-18 14:35:56 -08:00
George Politis
eee87bc546 Merge pull request #2303 from jitsi/update-lib-ff-stats-fix
Updates to latest lib-jitsi-meet f71ff66.
2017-12-15 16:05:03 -06:00
damencho
9a42b866ba Updates to latest lib-jitsi-meet f71ff66.
Updates also to latest react-callstats 3.27.0 as lib-jitsi-meet already updated to it.
2017-12-15 15:24:58 -06:00
Saúl Ibarra Corretgé
b920140488 android: update Gradle plugin version for AS 3.0.1 2017-12-14 15:20:05 -06:00
Saúl Ibarra Corretgé
49acd6bf6a android: simplify using the Google Maven repo reference
Also remove mavenLocal since we don't need it.
2017-12-14 15:20:05 -06:00
Saúl Ibarra Corretgé
7001208d87 [RN] Adjust filmstrip ordering based on aspect ratio
When in wide aspect ratio,, show it with the local participant on top, and the
remote ones after, sorted by join order.
2017-12-14 12:36:03 -06:00
Saúl Ibarra Corretgé
4a0e55b1f4 deps: update lib-jitsi-meet dependency 2017-12-13 11:11:06 -06:00
Lyubo Marinov
73cc9a68c7 Full commit hash 2017-12-13 10:15:48 -06:00
Saúl Ibarra Corretgé
e9c91d194c android: update appcompat version 2017-12-13 09:35:34 -06:00
Saúl Ibarra Corretgé
3460fe03e5 android: update target SDK version
Android Oreo (API level 26) is supported since React Native 50.
2017-12-13 09:35:34 -06:00
Saúl Ibarra Corretgé
e65566ad03 Merge pull request #2288 from saghul/rn-i18n
[RN] Build react-native-locale-detector
2017-12-13 11:35:42 +01:00
Saúl Ibarra Corretgé
57206cc36a [RN] Build react-native-locale-detector
Upstream lacked a CocoaPods podspec file, PR:
https://github.com/DylanVann/react-native-locale-detector/pull/3
2017-12-13 10:17:05 +01:00
Saúl Ibarra Corretgé
c05c8e0f1e [RN] Handle config loading errors
They will be stored in redux and the PageReloadOverlay will be displayed.

Note that this commit also introduces a subtle (and yet important!) change:
the location URL is now always set, regardless of the configuration loading or
not. This is needed in order for the retry logic to pick it up.
2017-12-12 22:59:04 -06:00
Saúl Ibarra Corretgé
87a87eebb9 [RN] Add reload overlay in case of connection / conference errors 2017-12-12 22:58:46 -06:00
Lyubo Marinov
ad497fed7c Reduce duplication 2017-12-12 21:58:33 -06:00
Saúl Ibarra Corretgé
0f6243ee88 feat(overlays): CallOverlay is not really an overlay
It's not supposed to go on top of everything, like an error would. It's tied to
a conference, so render it outside of the OverlayContainer.
2017-12-12 20:52:29 -06:00
Lyubo Marinov
b39b6640b4 React & React Native Fragment-like 2017-12-12 20:52:29 -06:00
Saúl Ibarra Corretgé
870e6bbddc feat(overlays): render overlays outside of Conference
On web Conference is pretty much all there is, but on mobile we have the welcome
page and the blank page. If we fail to load config.js, for example we will still
be in the welcome page *and* we want to show an error overlay.
2017-12-12 20:52:29 -06:00
Lyubo Marinov
b93bac5aa9 feat(room-lock): hide dialog when conference fails 2017-12-12 20:51:56 -06:00
Saúl Ibarra Corretgé
c86895ae13 feat(room-lock): hide dialog when conference fails 2017-12-12 20:39:25 -06:00
Дамян Минков
e28b847fb0 Updates config feature and whitelists options that can be overridden. (#2282)
* Removes unused config logic.

* Whitelists config options that can be overridden using the URL.

* Recorder login with credentials, not supported by externalconnect.

Jibri uses xmpp credentials to login, which is not supported by externalconnect, so we want to skip it till that is supported.

* Whitelist only config.js

* Extracts whitelisting in separate function.
2017-12-12 11:16:55 -08:00
Saúl Ibarra Corretgé
f6ace61674 doc: document required proguard rules 2017-12-12 10:48:51 -06:00
Saúl Ibarra Corretgé
63d661ad5e ios: remove needless method
We just call the parent class' method, so just get rid of it.
2017-12-12 11:57:18 +01:00
Дамян Минков
e0e2104723 Updates mobile browser page buttons. (#2281) 2017-12-11 15:45:57 -08:00
Lyubo Marinov
6f0b828512 Fix crash caused by "[Android] Handle disposed VideoTrack in WebRTCView" 2017-12-11 14:24:17 -06:00
virtuacoplenny
1984f8d0c0 fix(vertical-filmstrip): scope previous Firefox scroll fixes (#2276)
In aa93a783, remote videos not scrolling on Firefox, IE, and
Edge was worked around using CSS. The CSS selector is too vague
and also catches horizontal filmstrip. The selector should
apply to vertical filmstrip only.
2017-12-11 11:03:24 -08:00
virtuacoplenny
9b67e796bd ref(analytics): centralize all event names (#2272)
* ref(analytics): centralize all event names

* squash: fix typo and alpha ordering

* squash: rename file to AnalyticsEvents to parallel lib-jitsi-meet
2017-12-11 12:48:32 -06:00
hristoterezov
ee1ec42463 fix(external_api): Request feedback when using the API (#2271) 2017-12-11 09:43:52 -08:00
Saúl Ibarra Corretgé
76fb3b3c63 Merge pull request #2262 from virtuacoplenny/lenny/welcome-page-espanol
fix(welcome-page): fix alignment issues
2017-12-11 10:05:51 +01:00
damencho
b49e600267 Cleanup, removes unused obsolete files. 2017-12-07 11:14:21 -06:00
damencho
5a3f952a2f Uses prosodyctl default inputs. 2017-12-07 11:14:21 -06:00
damencho
3ac41bb0c3 Updates manual install doc with auth.domain certs instructions. 2017-12-07 11:14:21 -06:00
damencho
94813bc0fd Changes owner to prosody of newly created certificates. Fixes #2244. 2017-12-07 11:14:21 -06:00
Leonard Kim
457b4255b9 fix(welcome-page): leverage existing table display to vertical align 2017-12-06 15:55:32 -08:00
Leonard Kim
bed9bd1d5a fix(welcome-page): use inline-block for alignment 2017-12-06 15:51:21 -08:00
jitsi-pootle
0d4dcffbac New files added from translate.jitsi.org based on templates 2017-12-06 16:44:57 +00:00
Lyubo Marinov
a5538adf8a [RN] Add a timeout for loading the configuration 2017-12-05 21:07:15 -06:00
Saúl Ibarra Corretgé
38b645bc27 [RN] Add a timeout for loading the configuration 2017-12-05 17:08:10 -06:00
Saúl Ibarra Corretgé
15bf6b9e30 deps: update React to 16.2.0 2017-12-05 14:38:57 -06:00
damencho
67ac0e8b8a Updates the unsupported mobile browser page. 2017-12-05 09:52:44 -06:00
Leonard Kim
b74b29e8a0 fix(css): load css before js
Currently all.css is loaded after app.js. This means there may
not be a guarantee that the css is loaded before the js, which
is bad because the js does dom querying for sizes on elements,
but some element sizes will be affected by js. So instead load
css upfront and let the browser block as needed or at least
give the css a head start in racing javascript to load.
2017-12-05 08:50:13 -06:00
Leonard Kim
b258a9fc5e ref(css): move aui css to jitsi-meet 2017-12-05 08:50:13 -06:00
Leonard Kim
a653816f90 fix(vertical-filmstrip): prevent shared videos from displaying under avatars
- Modify Etherpad and SharedVideo so their resizing takes into account
  the width of the filmstrip in vertical filmstrip mode.
- Modify Filmstrip's getFilmstripWidth to account for when the filmstrip
  is hidden.
- modify VideoContainer so in vertical filmstrip mode it centers the
  shared desktop stream in the middle of the available space not taken
  by filmstrip.
- Also allow clickthrough on the secondary toolbar itself while still
  allowing clicks on the toolbar's buttons. This allows clicks on
  shared videos to go through.
2017-12-05 08:45:45 -06:00
Дамян Минков
9ddc5a0e42 Skips empty invites for video rooms. (#2251) 2017-12-04 20:59:28 -08:00
hristoterezov
d79995e14c fix(aot): Toolbar styles (#2252)
Rounded corners on the first and last buttons. Size of the hangup button
on hover.
2017-12-04 20:23:51 -08:00
hristoterezov
5ffcaca649 feat(aot): Handle video not available use cases (#2242) 2017-12-04 19:27:17 -08:00
Leonard Kim
40df5f97d4 fix(vertical-filmstrip): no scrollbars on Firefox from single thumbnail
Something is causing firefox to show scrollbars on the remote videos
container even though there is plenty of room. I lost this battle
and just made the container taller...
2017-12-04 21:12:57 -06:00
Leonard Kim
aa93a78372 fix(vertical-filmstrip): allow overflow scrolling on firefox, edge, and ie
Using column-reverse prevents proper scrolling on browsers other than Safari
and Chrome. Additionally, Firefox has an issue where flex containers have
dimensions set to auto, preventing resize. So, add hacks to maintain Chrome
and Safari's behavior while allowing for some kind of scrolling on other
browsers.
2017-12-04 21:12:57 -06:00
Leonard Kim
6b8b929d92 ref(build): remove aui javascript from imports 2017-12-04 16:19:18 -06:00
Leonard Kim
c9b54845d9 ref(settings): convert panel to react
The goal is to reduce usage on atlassian/aui. New components
have been created to display the settings panel. Language
selection will reach into i18n for state whereas moderator
options will keep state in redux.
2017-12-04 16:19:18 -06:00
Lyubo Marinov
0eafee2a95 feat(errors): fix error handling for connection and conference 2017-12-04 16:01:28 -06:00
Saúl Ibarra Corretgé
de0d69a20e feat(errors): fix error handling for connection and conference
Properly handle errors while connecting or joining a conference. Prior to this
patch, only errors on established conferences / connections were saved to the
redux store.
2017-12-04 15:52:52 -06:00
hristoterezov
eae9ddabad fix(external_api): fire videoConferenceLeft event on unload (#2243) 2017-12-04 10:33:58 -08:00
Lyubo Marinov
569b3547c8 Upgrade NPM dependencies/packages: react-native 0.50 2017-12-04 00:45:18 -06:00
Lyubo Marinov
d8bc26a8ea Upgrade NPM dependencies/packages: ESLint 2017-12-04 00:21:01 -06:00
Lyubo Marinov
61e653a510 Upgrade NPM dependencies/packages 2017-12-04 00:17:35 -06:00
Lyubo Marinov
ac3a74c47e Fix(Android): peerconnection removeStream is not working 2017-11-30 16:49:36 -06:00
Lyubo Marinov
bf7b723891 feat(conference): hide user media permission overlay when tracks are created 2017-11-29 22:47:24 -06:00
Saúl Ibarra Corretgé
4829b86352 feat(conference): hide user media permission overlay when tracks are created
Don't wait for the connection to be made, since in some cases, when auth is
rquired, for instance, that won't happen until the user inputs their
credentials, but the dialog would be overshadowed by the overlay.
2017-11-29 22:39:15 -06:00
Lyubo Marinov
dda4d7a99e feat(overlays): switch to flow Props 2017-11-29 22:13:24 -06:00
Saúl Ibarra Corretgé
19702671f6 feat(overlays): switch to flow Props 2017-11-29 21:52:39 -06:00
Lyubo Marinov
d88b57d35c webpack & UglifyJS w/ cache & parallel 2017-11-29 13:41:57 -06:00
yanas
a9b8f49995 Add user id to analytics if provided in jwt 2017-11-29 10:36:57 -06:00
Lyubo Marinov
2306e26287 [RN] Fix assigning Dialog state 2017-11-29 10:21:49 -06:00
Saúl Ibarra Corretgé
3633f2aac5 [RN] Fix assigning Dialog state
75bf7638b3 introduced this regression, state must
be assigned as an object, even though one would think it's automagically
initialized to an object. Oh well!
2017-11-29 10:18:32 -06:00
Saúl Ibarra Corretgé
c320540fa3 Merge pull request #2227 from jitsi/mobile_testing
feat: add more accessibility labels
2017-11-29 15:20:19 +01:00
Lyubo Marinov
75bf7638b3 ref: define state and property types (2) 2017-11-28 22:03:00 -06:00
paweldomas
379bad0ce6 ref: define state and property types 2017-11-28 20:36:02 -06:00
Leonard Kim
2becfd026b fix(device-selection): add proptypes shim for popup
AtlasKit is not fully compatible with React 16. One problem
is PropTypes will not be defined on the React object. So,
add the prop-types shim to the popup bundle.
2017-11-28 15:45:56 -06:00
paweldomas
cd48ee3dbf feat: add more accessibility labels
Adds more accessibility labels required for mobile automated testing.
2017-11-28 12:28:37 -06:00
Lyubo Marinov
e4ed02815f Coding style: no runtime-dependent global values 2017-11-27 20:55:45 -06:00
Lyubo Marinov
d1e5e6b93b Coding style: consistency, jsdocs
These modification are not necessarily directly related to the
containing PR, I merely saw them while reviewing the containing PR.
2017-11-27 17:45:17 -06:00
Saúl Ibarra Corretgé
38629b437d feat(overlays): refactor logic for selecting current overlay
Do the selection in mapStateToProps so the container itself doesn't need to
receive all the props that each overlay needs.

Each overlay is responsible for fetching their own props and for providing a
"needsDisplay" static method wich will be called with the full redux state and
should return true if the overlay needs displaying.

Also eliminate duplicated state keeping: the connection and conference error
states can be fetched from their respective base features.
2017-11-27 17:45:11 -06:00
Saúl Ibarra Corretgé
d0859b3ce1 feat(conference): store conference errors in redux 2017-11-27 17:45:11 -06:00
Дамян Минков
345fcefa7d On adding participant show the initial status text if any. (#2220)
* On adding participant show the initial status text if any.

When participant joins and there is an initial status we show it, instead of the connected notification. If initial status is missing proceed with the default user connected notification.

* Updates to latest lib-jitsi-meet (365bd886ee).

* Adds a fixme comment.

* Updates to latest lib-jitsi-meet (365bd886ee).
2017-11-27 15:05:53 -08:00
yanas
8e8edb0793 Renames Invite people button to Invite. 2017-11-27 15:21:13 -06:00
virtuacoplenny
4ead402388 spike: feat(notifications): prioritize based on type (appearance) (#2188)
* feat(notifications): prioritize based on type (appearance)

* squash: add return description to doc
2017-11-27 10:47:01 -06:00
Saúl Ibarra Corretgé
c51d351694 Merge pull request #2205 from virtuacoplenny/lenny/progress-bar-react
ref(overlay): convert progress bar to react
2017-11-23 15:35:27 +01:00
George Politis
83b6dc1518 Merge pull request #2208 from jitsi/cs-update
Updates to latest lib-jitsi-meet (1c743d65ee).
2017-11-22 16:58:42 -06:00
damencho
09a952c390 Updates to latest lib-jitsi-meet (1c743d65ee). 2017-11-22 16:09:12 -06:00
George Politis
d5752afd96 Merge pull request #2207 from jitsi/ljm-update-dc3397b18b3c3c41ee8d17224f9af9318b844c43
npm: Updates lib-jitsi-meet to dc3397b18b3c3c41ee8d17224f9af9318b844c43.
2017-11-22 14:39:45 -06:00
Leonard Kim
bb45f76a7a fix(conference): initialize UI features on CONFERENCE_JOINED
Initializing UI features, like keyboard shortcuts, by chaining
onto APP.conference.init is not safe because init can fail,
skipping the initializing of UI features. This can happen when
the room is locked and then a failure event is dispatched into
middleware. I couldn't find a place to properly chain onto
in the APP.conference.init promise chain, primarily due
to the flow continued within middleware, so instead I
leveraged an existing listener for CONFERENCE_JOINED.
2017-11-22 13:28:04 -06:00
George Politis
045a922482 npm: Updates lib-jitsi-meet to dc3397b18b3c3c41ee8d17224f9af9318b844c43. 2017-11-22 10:39:43 -06:00
virtuacoplenny
03e68b0e4b feat(video-quality): hide if recorder or interfaceConfig specified it (#2166) 2017-11-22 11:18:08 +01:00
linkmauve
980aa9b39a Remove duplicated line in config.js (#2159) 2017-11-22 10:56:51 +01:00
Leonard Kim
f0d3abffc5 ref(overlay): convert progress bar to react 2017-11-21 14:45:43 -08:00
Дамян Минков
7b1b873b6e VideoSIPGW updates (#2201)
* Adds initial documentation for sipgw jibri.

Also explains enabling the people search service and the request/response that are made around sipgw jibri service.

* Fixes add people dialog to invite users and rooms.

No invitation is sent when there is nobody to invite.

* Reuse some recording strings, by using arguments.

* Make sure web also dispatches CONFERENCE_WILL_JOIN.

* Introduces new feature videosipgw.

* Fixes lint errors.

* Renames methods to use people, chatRooms and videoRooms.

* Updates to latest lib-jitsi-meet (dc3397b18b).
2017-11-21 14:45:14 -08:00
Leonard Kim
28b153facf ref(remote-video): remove redundant method 2017-11-21 15:06:30 -06:00
Leonard Kim
c2f5afe9c2 fix(large-video): switch to dominant speaker with no video
On DOMINANT_SPEAKER_CHANGED events, switch to the new
dominant speaker regardless of if the speaker has video;
it's okay to show the speaker's avatar.
2017-11-21 15:06:30 -06:00
Leonard Kim
fcb3ca836f fix(large-video): return to dominant speaker without video
Always switch to the dominant speaker after unpinning
instead of conditionally checking if the current dominant
speaker has video.
2017-11-21 15:06:30 -06:00
Leonard Kim
ef813fbf71 ref(notifications): replace NotificationWithToggle with Notification
It was decided along with the mute participant dialog reactification
that these types of warning messages should not be toggleable--that
they should simply always display because there is no undo action.
As such, the component NotificationWithToggle is no longer needed.
2017-11-21 11:55:45 -06:00
virtuacoplenny
fe411398e3 fix(notifications): throttle and batch join notifications (#2182)
* fix(notifications): throttle and batch join notifications

Instead of directly calling to show a join notification,
go through a specific method. This method will queue
names for display while a throttled function pulls
the names and shows a notification.

* squash: remove unused translation key

* squash: use default display name

* squash: move into participant actions
2017-11-21 11:38:40 -06:00
Saúl Ibarra Corretgé
0aa377fcfc [RN] Ignore mute error if track is disposed
Refs: https://github.com/jitsi/lib-jitsi-meet/pull/648

It's possible for a track to be disposed but still on the redux store, before
the reducer removed it.
2017-11-21 11:13:35 -06:00
Saúl Ibarra Corretgé
90e4291751 [iOS] Update Podfile.lock 2017-11-21 11:46:35 +01:00
bgrozev
8f59b6f215 npm: Updates lib-jitsi-meet. (#2199) 2017-11-20 13:46:29 -08:00
Saúl Ibarra Corretgé
81ac1bf4a5 [RN] Translate AudioRoutePickerDialog 2017-11-20 07:54:05 -06:00
Lyubo Marinov
81094ba7fd [Android] Fix NullPointerException in AudioModeModule 2017-11-19 21:58:24 -06:00
Lyubo Marinov
3acf0c7f64 [Android] Fix UnsupportedOperationException in AudioModeModule 2017-11-19 21:58:24 -06:00
Leonard Kim
917fdcaa10 ref(deps): remove jquery-ui
After looking at the jquery-ui documentation, I believe it
is being used only in one place, when toggling the smiley
menu. That toggling has been quickly replaced with a normal
jquery call.

Note: @atlassian/aui also uses jquery-ui but killing that
off will be more difficult due to its CSS being used.
2017-11-17 16:49:10 -06:00
Lyubo Marinov
3f350be805 [Android] Handle disposed VideoTrack in WebRTCView 2017-11-17 14:23:11 -06:00
Lyubo Marinov
78bc8121ff [RN] Fix "Error: Provided an image that is available locally already." 2017-11-17 13:33:04 -06:00
Lyubo Marinov
18d677e2f5 npm update 2017-11-16 13:26:40 -06:00
Lyubo Marinov
8fd91573fc Fix eslint & flow errors
Prepares for the latest eslint & flow-related npm packages which cause
these errors.
2017-11-16 12:27:54 -06:00
Leonard Kim
30be46326a fix(remote-menu): show volume slider whenever available 2017-11-15 16:25:44 -06:00
812 changed files with 51885 additions and 29703 deletions

View File

@@ -12,21 +12,21 @@
; For RN Apps installed via npm, "Libraries" folder is inside
; "node_modules/react-native" but in the source repo it is in the root
.*/Libraries/react-native/React.js
.*/Libraries/react-native/ReactNative.js
; Ignore polyfills
.*/Libraries/polyfills/.*
; Ignore packages in node_modules which we (i.e. the jitsi-meet project) have
; seen to cause errors and we have chosen not to fix.
.*/node_modules/@atlaskit/.*/*.js.flow
.*/node_modules/@atlassian
.*/node_modules/bower/lib/node_modules/bower-json/test/.*
.*/node_modules/immutable/dist/immutable.js.flow
.*/node_modules/jsonlint/test/.*
; FIXME Remove once we update past this commit:
; FIXME Remove once we update past commit
; https://github.com/facebook/react-native/commit/df8d0d1db9203cc87ad3682e6138b2a9ed714365
.*/node_modules/react-native/local-cli/link/link.js
.*/node_modules/react-native-keep-awake/.*
.*/node_modules/styled-components/.*
@@ -36,21 +36,16 @@
[libs]
node_modules/react-native/Libraries/react-native/react-native-interface.js
node_modules/react-native/flow
node_modules/react-native/flow/
[options]
emoji=true
module.system=haste
; FIXME: munge_underscores should be false but right now there are some errors
; if we change the value to false
; Treats class properties with underscore as private. Disabled because currently
; for us "_" can mean protected too.
; munge_underscores=false
munge_underscores=true
; FIXME Remove once we update past this commit:
; FIXME Remove once we update past commit
; https://github.com/facebook/react-native/commit/df8d0d1db9203cc87ad3682e6138b2a9ed714365
module.name_mapper='^./link/link$' -> 'emptyObject'
@@ -62,11 +57,10 @@ suppress_type=$FlowFixMeProps
suppress_type=$FlowFixMeState
suppress_type=$FixMe
suppress_comment=\\(.\\|\n\\)*\\$FlowFixMe\\($\\|[^(]\\|(\\(>=0\\.\\(5[0-3]\\|[1-4][0-9]\\|[0-9]\\).[0-9]\\)? *\\(site=[a-z,_]*react_native_oss[a-z,_]*\\)?)\\)
suppress_comment=\\(.\\|\n\\)*\\$FlowIssue\\((\\(>=0\\.\\(5[0-3]\\|[1-4][0-9]\\|[0-9]\\).[0-9]\\)? *\\(site=[a-z,_]*react_native_oss[a-z,_]*\\)?)\\)?:? #[0-9]+
suppress_comment=\\(.\\|\n\\)*\\$FlowFixMe\\($\\|[^(]\\|(\\(>=0\\.\\(5[0-7]\\|[1-4][0-9]\\|[0-9]\\).[0-9]\\)? *\\(site=[a-z,_]*react_native[a-z,_]*\\)?)\\)
suppress_comment=\\(.\\|\n\\)*\\$FlowIssue\\((\\(>=0\\.\\(5[0-7]\\|[1-4][0-9]\\|[0-9]\\).[0-9]\\)? *\\(site=[a-z,_]*react_native[a-z,_]*\\)?)\\)?:? #[0-9]+
suppress_comment=\\(.\\|\n\\)*\\$FlowFixedInNextDeploy
suppress_comment=\\(.\\|\n\\)*\\$FlowExpectedError
suppress_comment=\\(.\\|\n\\)*\\$FlowDisableNextLine
unsafe.enable_getters_and_setters=true
@@ -83,4 +77,4 @@ module.file_ext=.jsx
module.file_ext=.json
[version]
^0.53.0
^0.57.0

20
.gitignore vendored
View File

@@ -7,6 +7,9 @@ all.css
.remote-sync.json
.sync-config.cson
# CocoaPods
Pods/
# The following are automatically generated by the react-native command line
# utility (either with the init or upgrade option which pull in the latest
# template files recommended by Facebook for React Native).
@@ -57,14 +60,11 @@ buck-out/
# fastlane
#
# It is recommended to not store the screenshots in the git repo. Instead, use
# fastlane to re-generate the screenshots whenever they are needed. For more
# information about the recommended setup visit:
# https://github.com/fastlane/fastlane/blob/master/fastlane/docs/Gitignore.md
#
fastlane/report.xml
fastlane/Preview.html
fastlane/screenshots
# It is recommended to not store the screenshots in the git repo. Instead, use fastlane to re-generate the
# screenshots whenever they are needed.
# For more information about the recommended setup visit:
# https://docs.fastlane.tools/best-practices/source-control/
# CocoaPods
Pods/
*/fastlane/report.xml
*/fastlane/Preview.html
*/fastlane/screenshots

4
.travis.yml Normal file
View File

@@ -0,0 +1,4 @@
osx_image: xcode9.3
language: objective-c
script:
- "./ios/travis-ci/build-ipa.sh"

View File

@@ -21,7 +21,7 @@ license agreement as either a [corporation](https://jitsi.org/ccla) or an
in the agreement, unfortunately, we cannot accept your contribution.
## Creating Pull Requests
- Make sure your code passes the linter rules beforehand. The linter is exeuted
- Make sure your code passes the linter rules beforehand. The linter is executed
automatically when committing code.
- Perform **one** logical change per pull request.
- Maintain a clean list of commits, squash them if necessary.

View File

@@ -9,6 +9,7 @@ STYLES_BUNDLE = css/all.bundle.css
STYLES_DESTINATION = css/all.css
STYLES_MAIN = css/main.scss
WEBPACK = ./node_modules/.bin/webpack
WEBPACK_DEV_SERVER = ./node_modules/.bin/webpack-dev-server
all: compile deploy clean
@@ -21,6 +22,7 @@ clean:
deploy: deploy-init deploy-appbundle deploy-lib-jitsi-meet deploy-css deploy-local
deploy-init:
rm -fr $(DEPLOY_DIR)
mkdir -p $(DEPLOY_DIR)
deploy-appbundle:
@@ -33,9 +35,11 @@ deploy-appbundle:
$(BUILD_DIR)/external_api.min.map \
$(BUILD_DIR)/device_selection_popup_bundle.min.js \
$(BUILD_DIR)/device_selection_popup_bundle.min.map \
$(BUILD_DIR)/dial_in_info_bundle.min.js \
$(BUILD_DIR)/dial_in_info_bundle.min.map \
$(BUILD_DIR)/alwaysontop.min.js \
$(BUILD_DIR)/alwaysontop.min.map \
$(OUTPUT_DIR)/analytics.js \
$(OUTPUT_DIR)/analytics-ga.js \
$(DEPLOY_DIR)
deploy-lib-jitsi-meet:
@@ -43,6 +47,7 @@ deploy-lib-jitsi-meet:
$(LIBJITSIMEET_DIR)/lib-jitsi-meet.min.js \
$(LIBJITSIMEET_DIR)/lib-jitsi-meet.min.map \
$(LIBJITSIMEET_DIR)/connection_optimization/external_connect.js \
$(LIBJITSIMEET_DIR)/modules/browser/capabilities.json \
$(DEPLOY_DIR)
deploy-css:
@@ -53,6 +58,9 @@ deploy-css:
deploy-local:
([ ! -x deploy-local.sh ] || ./deploy-local.sh)
dev: deploy-init deploy-css deploy-lib-jitsi-meet
$(WEBPACK_DEV_SERVER)
source-package:
mkdir -p source_package/jitsi-meet/css && \
cp -r *.js *.html connection_optimization favicon.ico fonts images libs static sounds LICENSE lang source_package/jitsi-meet && \

View File

@@ -1,19 +1,24 @@
# Jitsi Meet - Secure, Simple and Scalable Video Conferences
Jitsi Meet is an open-source (Apache) WebRTC JavaScript application that uses [Jitsi Videobridge](https://jitsi.org/videobridge) to provide high quality, scalable video conferences. You can see [Jitsi Meet in action](http://youtu.be/7vFUVClsNh0) here at the session #482 of the VoIP Users Conference.
Jitsi Meet is an open-source (Apache) WebRTC JavaScript application that uses [Jitsi Videobridge](https://jitsi.org/videobridge) to provide high quality, [secure](#security) and scalable video conferences. You can see Jitsi Meet in action [here at the session #482 of the VoIP Users Conference](http://youtu.be/7vFUVClsNh0).
You can also try it out yourself at https://meet.jit.si .
The Jitsi Meet client runs in your browser, without the need for installing anything on your computer. You can also try it out yourself at https://meet.jit.si .
Jitsi Meet allows for very efficient collaboration. It allows users to stream their desktop or only some windows. It also supports shared document editing with Etherpad.
## Installation
On the client side, no installation is necessary. You just point your browser to the URL of your deployment. This section is about installing the Jitsi Meet suite on your server and hosting your own conferencing service.
Installing Jitsi Meet is quite a simple experience. For Debian-based systems, we recommend following the [quick-install](https://github.com/jitsi/jitsi-meet/blob/master/doc/quick-install.md) document, which uses the package system.
For other systems, or if you wish to install all components manually, see the [detailed manual installation instructions](https://github.com/jitsi/jitsi-meet/blob/master/doc/manual-install.md).
## Download
| Latest stable release | [![release](https://img.shields.io/badge/release-latest-green.svg)](https://github.com/jitsi/jitsi-meet/releases/latest) |
|---|---|
You can download Debian/Ubuntu binaries:
* [stable](https://download.jitsi.org/stable/) ([instructions](https://jitsi.org/downloads/ubuntu-debian-installations-instructions/))
* [testing](https://download.jitsi.org/testing/) ([instructions](https://jitsi.org/downloads/ubuntu-debian-installations-instructions-for-testing/))
@@ -28,11 +33,11 @@ You can get our mobile versions from here:
## Building the sources
Node.js >= 6 is required.
Node.js >= 8 is required.
On Debian/Ubuntu systems, the required packages can be installed with:
```
sudo apt-get install npm nodejs-legacy
sudo apt-get install npm nodejs
cd jitsi-meet
npm install
```
@@ -42,7 +47,7 @@ To build the Jitsi Meet application, just type
make
```
## Working with the library sources (lib-jitsi-meet)
### Working with the library sources (lib-jitsi-meet)
By default the library is build from its git repository sources. The default dependency path in package.json is :
```json
@@ -70,12 +75,12 @@ It allows to link `lib-jitsi-meet` dependency to local source in few steps:
```bash
cd lib-jitsi-meet
# create global symlink for lib-jitsi-meet package
#### create global symlink for lib-jitsi-meet package
npm link
cd ../jitsi-meet
# create symlink from the local node_modules folder to the global lib-jitsi-meet symlink
#### create symlink from the local node_modules folder to the global lib-jitsi-meet symlink
npm link lib-jitsi-meet
```
@@ -88,6 +93,20 @@ cd jitsi-meet
npm unlink lib-jitsi-meet
npm install
```
### Running with webpack-dev-server for development
Use it at the CLI, type
```
make dev
```
By default the backend deployment used is `beta.meet.jit.si`, you can point the Jitsi-Meet app at a different backend by using a proxy server. To do this set the WEBPACK_DEV_SERVER_PROXY_TARGET variable:
```
export WEBPACK_DEV_SERVER_PROXY_TARGET=https://your-example-server.com
make dev
```
The app should be running at https://localhost:8080/
## Contributing
@@ -98,6 +117,21 @@ see our [guidelines for contributing](CONTRIBUTING.md).
Jitsi Meet provides a very flexible way of embedding it in external applications by using the [Jitsi Meet API](doc/api.md).
## Security
WebRTC today does not provide a way of conducting multiparty conversations with
end-to-end encryption. As a matter of fact, unless you consistently vocally
compare DTLS fingerprints with your peers, the same goes for one-to-one calls.
As a result when using a Jitsi Meet instance, your stream is encrypted on the
network but decrypted on the machine that hosts the bridge.
The Jitsi Meet architecture allows you to deploy your own version, including
all server components, and in that case your security guarantees will be roughly
equivalent to these of a direct one-to-one WebRTC call. This is what's unique to
Jitsi Meet in terms of security.
The [meet.jit.si](https://meet.jit.si) service is maintained by the Jitsi team
at [Atlassian](https://atlassian.com).
## Mobile app
Jitsi Meet is also available as a React Native app for Android and iOS.
Instructions on how to build it can be found [here](doc/mobile.md).

154
analytics-ga.js Normal file
View File

@@ -0,0 +1,154 @@
/* global ga */
(function(ctx) {
/**
*
*/
function Analytics(options) {
/* eslint-disable */
if (!options.googleAnalyticsTrackingId) {
console.log(
'Failed to initialize Google Analytics handler, no tracking ID');
return;
}
/**
* Google Analytics
* TODO: Keep this local, there's no need to add it to window.
*/
(function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
(i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
})(window,document,'script','//www.google-analytics.com/analytics.js','ga');
ga('create', options.googleAnalyticsTrackingId, 'auto');
ga('send', 'pageview');
/* eslint-enable */
}
/**
* Extracts the integer to use for a Google Analytics event's value field
* from a lib-jitsi-meet analytics event.
* @param {Object} event - The lib-jitsi-meet analytics event.
* @returns {Object} - The integer to use for the 'value' of a Google
* Analytics event.
* @private
*/
Analytics.prototype._extractAction = function(event) {
// Page events have a single 'name' field.
if (event.type === 'page') {
return event.name;
}
// All other events have action, actionSubject, and source fields. All
// three fields are required, and the often jitsi-meet and
// lib-jitsi-meet use the same value when separate values are not
// necessary (i.e. event.action == event.actionSubject).
// Here we concatenate these three fields, but avoid adding the same
// value twice, because it would only make the GA event's action harder
// to read.
let action = event.action;
if (event.actionSubject && event.actionSubject !== event.action) {
// Intentionally use string concatenation as analytics needs to
// work on IE but this file does not go through babel. For some
// reason disabling this globally for the file does not have an
// effect.
// eslint-disable-next-line prefer-template
action = event.actionSubject + '.' + action;
}
if (event.source && event.source !== event.action
&& event.source !== event.action) {
// eslint-disable-next-line prefer-template
action = event.source + '.' + action;
}
return action;
};
/**
* Extracts the integer to use for a Google Analytics event's value field
* from a lib-jitsi-meet analytics event.
* @param {Object} event - The lib-jitsi-meet analytics event.
* @returns {Object} - The integer to use for the 'value' of a Google
* Analytics event, or NaN if the lib-jitsi-meet event doesn't contain a
* suitable value.
* @private
*/
Analytics.prototype._extractValue = function(event) {
let value = event && event.attributes && event.attributes.value;
// Try to extract an integer from the "value" attribute.
value = Math.round(parseFloat(value));
return value;
};
/**
* Extracts the string to use for a Google Analytics event's label field
* from a lib-jitsi-meet analytics event.
* @param {Object} event - The lib-jitsi-meet analytics event.
* @returns {string} - The string to use for the 'label' of a Google
* Analytics event.
* @private
*/
Analytics.prototype._extractLabel = function(event) {
let label = '';
// The label field is limited to 500B. We will concatenate all
// attributes of the event, except the user agent because it may be
// lengthy and is probably included from elsewhere.
for (const property in event.attributes) {
if (property !== 'permanent_user_agent'
&& property !== 'permanent_callstats_name'
&& event.attributes.hasOwnProperty(property)) {
// eslint-disable-next-line prefer-template
label += property + '=' + event.attributes[property] + '&';
}
}
if (label.length > 0) {
label = label.slice(0, -1);
}
return label;
};
/**
* This is the entry point of the API. The function sends an event to
* google analytics. The format of the event is described in
* AnalyticsAdapter in lib-jitsi-meet.
* @param {Object} event - the event in the format specified by
* lib-jitsi-meet.
*/
Analytics.prototype.sendEvent = function(event) {
if (!event || !ga) {
return;
}
const gaEvent = {
'eventCategory': 'jitsi-meet',
'eventAction': this._extractAction(event),
'eventLabel': this._extractLabel(event)
};
const value = this._extractValue(event);
if (!isNaN(value)) {
gaEvent.eventValue = value;
}
ga('send', 'event', gaEvent);
};
if (typeof ctx.JitsiMeetJS === 'undefined') {
ctx.JitsiMeetJS = {};
}
if (typeof ctx.JitsiMeetJS.app === 'undefined') {
ctx.JitsiMeetJS.app = {};
}
if (typeof ctx.JitsiMeetJS.app.analyticsHandlers === 'undefined') {
ctx.JitsiMeetJS.app.analyticsHandlers = [];
}
ctx.JitsiMeetJS.app.analyticsHandlers.push(Analytics);
})(window);
/* eslint-enable prefer-template */

View File

@@ -1,47 +0,0 @@
/* global ga */
(function(ctx) {
/**
*
*/
function Analytics() {
/* eslint-disable */
/**
* Google Analytics
*/
(function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
(i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
})(window,document,'script','//www.google-analytics.com/analytics.js','ga');
ga('create', 'UA-319188-14', 'jit.si');
ga('send', 'pageview');
/* eslint-enable */
}
Analytics.prototype.sendEvent = function(action, data) {
// empty label if missing value for it and add the value,
// the value should be integer or null
let value = data.value;
value = value ? Math.round(parseFloat(value)) : null;
const label = data.label || '';
// Intentionally use string concatenation as analytics needs to work on
// IE but this file does not go through babel.
// eslint-disable-next-line prefer-template
ga('send', 'event', 'jit.si', action + '.' + data.browserName,
label, value);
};
if (typeof ctx.JitsiMeetJS === 'undefined') {
ctx.JitsiMeetJS = {};
}
if (typeof ctx.JitsiMeetJS.app === 'undefined') {
ctx.JitsiMeetJS.app = {};
}
if (typeof ctx.JitsiMeetJS.app.analyticsHandlers === 'undefined') {
ctx.JitsiMeetJS.app.analyticsHandlers = [];
}
ctx.JitsiMeetJS.app.analyticsHandlers.push(Analytics);
})(window);

View File

@@ -16,7 +16,7 @@
`"file:${rootProject.projectDir}/../../../jitsi/jitsi-maven-repository/releases"`
in android/build.gradle for the third-party react-native modules which Jitsi
Meet SDK for Android depends on and are not publicly available in Maven
repositories. Generally, if you are modifying the JavaSource code of Jitsi
repositories. Generally, if you are modifying the JavaScript code of Jitsi
Meet SDK for Android only, you will very likely need to consider the former
only.
@@ -107,19 +107,19 @@ public class MainActivity extends AppCompatActivity {
JitsiMeetView.onNewIntent(intent);
}
@Override
protected void onPause() {
super.onPause();
JitsiMeetView.onHostPause(this);
}
@Override
protected void onResume() {
super.onResume();
JitsiMeetView.onHostResume(this);
}
@Override
protected void onStop() {
super.onStop();
JitsiMeetView.onHostPause(this);
}
}
```
@@ -132,6 +132,10 @@ which displays a single `JitsiMeetView`.
See JitsiMeetView.getDefaultURL.
#### getPictureInPictureEnabled()
See JitsiMeetView.getPictureInPictureEnabled.
#### getWelcomePageEnabled()
See JitsiMeetView.getWelcomePageEnabled.
@@ -144,6 +148,10 @@ See JitsiMeetView.loadURL.
See JitsiMeetView.setDefaultURL.
#### setPictureInPictureEnabled(boolean)
See JitsiMeetView.setPictureInPictureEnabled.
#### setWelcomePageEnabled(boolean)
See JitsiMeetView.setWelcomePageEnabled.
@@ -169,6 +177,12 @@ if set to `null`, the default built in JavaScript is used: https://meet.jit.si.
Returns the `JitsiMeetViewListener` instance attached to the view.
#### getPictureInPictureEnabled()
Returns `true` if Picture-in-Picture is enabled; `false`, otherwise. If not
explicitly set (by a preceding `setPictureInPictureEnabled` call), defaults to
`true` if the platform supports Picture-in-Picture natively; `false`, otherwise.
#### getWelcomePageEnabled()
Returns true if the Welcome page is enabled; otherwise, false. If false, a black
@@ -210,19 +224,30 @@ view.loadURLObject(urlObject);
Sets the default URL. See `getDefaultURL` for more information.
NOTE: Must be called before `loadURL`/`loadURLString` for it to take effect.
NOTE: Must be called before (if at all) `loadURL`/`loadURLString` for it to take
effect.
#### setListener(listener)
Sets the given listener (class implementing the `JitsiMeetViewListener`
interface) on the view.
#### setPictureInPictureEnabled(boolean)
Sets whether Picture-in-Picture is enabled. If not set, Jitsi Meet SDK
automatically enables/disables Picture-in-Picture based on native platform
support.
NOTE: Must be called (if at all) before `loadURL`/`loadURLString` for it to take
effect.
#### setWelcomePageEnabled(boolean)
Sets whether the Welcome page is enabled. See `getWelcomePageEnabled` for more
information.
NOTE: Must be called before `loadURL`/`loadURLString` for it to take effect.
NOTE: Must be called (if at all) before `loadURL`/`loadURLString` for it to take
effect.
#### onBackPressed()
@@ -247,7 +272,8 @@ This is a static method.
#### onHostResume(activity)
Helper method which should be called from the activity's `onResume` method.
Helper method which should be called from the activity's `onResume` or `onStop`
method.
This is a static method.
@@ -259,6 +285,13 @@ activity's `onNewIntent` method.
This is a static method.
#### onUserLeaveHint()
Helper method for integrating automatic Picture-in-Picture. It should be called
from the activity's `onUserLeaveHint` method.
This is a static method.
#### JitsiMeetViewListener
`JitsiMeetViewListener` provides an interface apps can implement to listen to
@@ -309,3 +342,79 @@ fails.
The `data` `Map` contains an "error" key with the error and a "url" key with the
conference URL which necessitated the loading of the configuration file.
## ProGuard rules
When using the SDK on a project some proguard rules have to be added in order
to avoid necessary code being stripped. Add the following to your project's
rules file:
```
# React Native
# Keep our interfaces so they can be used by other ProGuard rules.
# See http://sourceforge.net/p/proguard/bugs/466/
-keep,allowobfuscation @interface com.facebook.proguard.annotations.DoNotStrip
-keep,allowobfuscation @interface com.facebook.proguard.annotations.KeepGettersAndSetters
-keep,allowobfuscation @interface com.facebook.common.internal.DoNotStrip
# Do not strip any method/class that is annotated with @DoNotStrip
-keep @com.facebook.proguard.annotations.DoNotStrip class *
-keep @com.facebook.common.internal.DoNotStrip class *
-keepclassmembers class * {
@com.facebook.proguard.annotations.DoNotStrip *;
@com.facebook.common.internal.DoNotStrip *;
}
-keepclassmembers @com.facebook.proguard.annotations.KeepGettersAndSetters class * {
void set*(***);
*** get*();
}
-keep class * extends com.facebook.react.bridge.JavaScriptModule { *; }
-keep class * extends com.facebook.react.bridge.NativeModule { *; }
-keepclassmembers,includedescriptorclasses class * { native <methods>; }
-keepclassmembers class * { @com.facebook.react.uimanager.UIProp <fields>; }
-keepclassmembers class * { @com.facebook.react.uimanager.annotations.ReactProp <methods>; }
-keepclassmembers class * { @com.facebook.react.uimanager.annotations.ReactPropGroup <methods>; }
-dontwarn com.facebook.react.**
# TextLayoutBuilder uses a non-public Android constructor within StaticLayout.
# See libs/proxy/src/main/java/com/facebook/fbui/textlayoutbuilder/proxy for details.
-dontwarn android.text.StaticLayout
# okhttp
-keepattributes Signature
-keepattributes *Annotation*
-keep class okhttp3.** { *; }
-keep interface okhttp3.** { *; }
-dontwarn okhttp3.**
# okio
-keep class sun.misc.Unsafe { *; }
-dontwarn java.nio.file.*
-dontwarn org.codehaus.mojo.animal_sniffer.IgnoreJRERequirement
-dontwarn okio.**
# WebRTC
-keep class org.webrtc.** { *; }
-dontwarn org.chromium.build.BuildHooksAndroid
# Jisti Meet SDK
-keep class org.jitsi.meet.sdk.** { *; }
```
## Picture-in-Picture
`JitsiMeetView` will automatically adjust its UI when presented in a
Picture-in-Picture style scenario, in a rectangle too small to accommodate its
"full" UI.
Jitsi Meet SDK automatically enables (unless explicitly disabled by a
`setPictureInPictureEnabled(false)` call) Android's native Picture-in-Picture
mode iff the platform is supported i.e. Android >= Oreo.

View File

@@ -50,6 +50,10 @@
-dontwarn com.facebook.react.**
# TextLayoutBuilder uses a non-public Android constructor within StaticLayout.
# See libs/proxy/src/main/java/com/facebook/fbui/textlayoutbuilder/proxy for details.
-dontwarn android.text.StaticLayout
# okhttp
-keepattributes Signature

View File

@@ -7,10 +7,12 @@
android:label="@string/app_name"
android:theme="@style/AppTheme">
<activity
android:configChanges="keyboard|keyboardHidden|orientation|screenSize"
android:configChanges="keyboard|keyboardHidden|orientation|screenLayout|screenSize|smallestScreenSize"
android:label="@string/app_name"
android:launchMode="singleTask"
android:name=".MainActivity"
android:resizeableActivity="true"
android:supportsPictureInPicture="true"
android:windowSoftInputMode="adjustResize">
<intent-filter>
<action android:name="android.intent.action.MAIN" />

View File

@@ -22,7 +22,17 @@ import android.util.Log;
import org.jitsi.meet.sdk.JitsiMeetActivity;
import org.jitsi.meet.sdk.JitsiMeetView;
import org.jitsi.meet.sdk.JitsiMeetViewListener;
import org.jitsi.meet.sdk.invite.AddPeopleController;
import org.jitsi.meet.sdk.invite.AddPeopleControllerListener;
import org.jitsi.meet.sdk.invite.InviteController;
import org.jitsi.meet.sdk.invite.InviteControllerListener;
import com.calendarevents.CalendarEventsPackage;
import com.facebook.react.bridge.UiThreadUtil;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
/**
@@ -38,6 +48,14 @@ import java.util.Map;
* {@code react-native run-android}.
*/
public class MainActivity extends JitsiMeetActivity {
/**
* The query to perform through {@link AddPeopleController} when the
* {@code InviteButton} is tapped in order to exercise the public API of the
* feature invite. If {@code null}, the {@code InviteButton} will not be
* rendered.
*/
private static final String ADD_PEOPLE_CONTROLLER_QUERY = null;
@Override
protected JitsiMeetView initializeView() {
JitsiMeetView view = super.initializeView();
@@ -48,6 +66,8 @@ public class MainActivity extends JitsiMeetActivity {
if (BuildConfig.DEBUG && view != null) {
view.setListener(new JitsiMeetViewListener() {
private void on(String name, Map<String, Object> data) {
UiThreadUtil.assertOnUiThread();
// Log with the tag "ReactNative" in order to have the log
// visible in react-native log-android as well.
Log.d(
@@ -87,19 +107,142 @@ public class MainActivity extends JitsiMeetActivity {
on("LOAD_CONFIG_ERROR", data);
}
});
// inviteController
final InviteController inviteController
= view.getInviteController();
inviteController.setListener(new InviteControllerListener() {
public void beginAddPeople(
AddPeopleController addPeopleController) {
onInviteControllerBeginAddPeople(
inviteController,
addPeopleController);
}
});
inviteController.setAddPeopleEnabled(
ADD_PEOPLE_CONTROLLER_QUERY != null);
inviteController.setDialOutEnabled(
inviteController.isAddPeopleEnabled());
}
return view;
}
private void onAddPeopleControllerInviteSettled(
AddPeopleController addPeopleController,
List<Map<String, Object>> failedInvitees) {
UiThreadUtil.assertOnUiThread();
// XXX Explicitly invoke endAddPeople on addPeopleController; otherwise,
// it is going to be memory-leaked in the associated InviteController
// and no subsequent InviteButton clicks/taps will be delivered.
// Technically, endAddPeople will automatically be invoked if there are
// no failedInviteees i.e. the invite succeeeded for all specified
// invitees.
addPeopleController.endAddPeople();
}
private void onAddPeopleControllerReceivedResults(
AddPeopleController addPeopleController,
List<Map<String, Object>> results,
String query) {
UiThreadUtil.assertOnUiThread();
int size = results.size();
if (size > 0) {
// Exercise AddPeopleController's inviteById implementation.
List<String> ids = new ArrayList<>(size);
for (Map<String, Object> result : results) {
Object id = result.get("id");
if (id != null) {
ids.add(id.toString());
}
}
addPeopleController.inviteById(ids);
return;
}
// XXX Explicitly invoke endAddPeople on addPeopleController; otherwise,
// it is going to be memory-leaked in the associated InviteController
// and no subsequent InviteButton clicks/taps will be delivered.
addPeopleController.endAddPeople();
}
@Override
protected void onCreate(Bundle savedInstanceState) {
// As this is the Jitsi Meet app (i.e. not the Jitsi Meet SDK), we do
// want the Welcome page to be enabled. It defaults to disabled in the
// SDK at the time of this writing but it is clearer to be explicit
// about what we want anyway.
// want to enable some options.
// The welcome page defaults to disabled in the SDK at the time of this
// writing but it is clearer to be explicit about what we want anyway.
setWelcomePageEnabled(true);
super.onCreate(savedInstanceState);
}
private void onInviteControllerBeginAddPeople(
InviteController inviteController,
AddPeopleController addPeopleController) {
UiThreadUtil.assertOnUiThread();
// Log with the tag "ReactNative" in order to have the log visible in
// react-native log-android as well.
Log.d(
"ReactNative",
InviteControllerListener.class.getSimpleName() + ".beginAddPeople");
String query = ADD_PEOPLE_CONTROLLER_QUERY;
if (query != null
&& (inviteController.isAddPeopleEnabled()
|| inviteController.isDialOutEnabled())) {
addPeopleController.setListener(new AddPeopleControllerListener() {
public void onInviteSettled(
AddPeopleController addPeopleController,
List<Map<String, Object>> failedInvitees) {
onAddPeopleControllerInviteSettled(
addPeopleController,
failedInvitees);
}
public void onReceivedResults(
AddPeopleController addPeopleController,
List<Map<String, Object>> results,
String query) {
onAddPeopleControllerReceivedResults(
addPeopleController,
results, query);
}
});
addPeopleController.performQuery(query);
} else {
// XXX Explicitly invoke endAddPeople on addPeopleController;
// otherwise, it is going to be memory-leaked in the associated
// InviteController and no subsequent InviteButton clicks/taps will
// be delivered.
addPeopleController.endAddPeople();
}
}
@Override
public void onRequestPermissionsResult(
int requestCode,
String[] permissions,
int[] grantResults) {
CalendarEventsPackage.onRequestPermissionsResult(
requestCode,
permissions,
grantResults);
super.onRequestPermissionsResult(
requestCode,
permissions,
grantResults);
}
}

View File

@@ -2,6 +2,5 @@
<!-- Base application theme. -->
<style name="AppTheme" parent="Theme.AppCompat.Light.NoActionBar">
<!-- Customize your theme here. -->
<item name="android:windowTranslucentStatus">true</item>
</style>
</resources>

View File

@@ -3,11 +3,11 @@
buildscript {
repositories {
google()
jcenter()
maven { url 'https://maven.google.com' }
}
dependencies {
classpath 'com.android.tools.build:gradle:3.0.0'
classpath 'com.android.tools.build:gradle:3.0.1'
// NOTE: Do not place your application dependencies here; they belong
// in the individual module build.gradle files.
@@ -16,14 +16,28 @@ buildscript {
allprojects {
repositories {
mavenLocal()
google()
jcenter()
maven { url "https://maven.google.com" } // Required for appcompat.
// React Native (JS, Obj-C sources, Android binaries) is installed from
// npm.
maven { url "$rootDir/../node_modules/react-native/android" }
}
// Make sure we use the react-native version in node_modules and not the one
// published in jcenter / elsewhere.
configurations.all {
resolutionStrategy {
eachDependency { DependencyResolveDetails details ->
if (details.requested.group == 'com.facebook.react'
&& details.requested.name == 'react-native') {
def file = new File("$rootDir/../node_modules/react-native/package.json")
def version = new groovy.json.JsonSlurper().parseText(file.text).version
details.useVersion version
}
}
}
}
// Third-party react-native modules which Jitsi Meet SDK for Android depends
// on and which are not available in third-party Maven repositories need to
// be deployed in a Maven repository of ours.
@@ -133,7 +147,7 @@ ext {
buildToolsVersion = "26.0.2"
compileSdkVersion = 26
minSdkVersion = 16
targetSdkVersion = 25
targetSdkVersion = 26
// The Maven artifact groupdId of the third-party react-native modules which
// Jitsi Meet SDK for Android depends on and which are not available in

View File

@@ -1,8 +1,8 @@
keystore(
name = 'debug',
store = 'debug.keystore',
properties = 'debug.keystore.properties',
visibility = [
'PUBLIC',
],
name = "debug",
properties = "debug.keystore.properties",
store = "debug.keystore",
visibility = [
"PUBLIC",
],
)

View File

@@ -21,15 +21,20 @@ android {
dependencies {
compile fileTree(dir: 'libs', include: ['*.jar'])
compile 'com.android.support:appcompat-v7:25.4.0'
compile 'com.android.support:appcompat-v7:27.0.2'
compile 'com.facebook.react:react-native:+'
compile project(':react-native-background-timer')
compile project(':react-native-fetch-blob')
compile project(':react-native-immersive')
compile project(':react-native-keep-awake')
compile project(':react-native-locale-detector')
compile project(':react-native-sound')
compile project(':react-native-vector-icons')
compile project(':react-native-webrtc')
compile project(':react-native-calendar-events')
testCompile 'junit:junit:4.12'
}
// Build process helpers
@@ -66,6 +71,25 @@ gradle.projectsEvaluated {
runBefore("processUniversal${buildNameCapitalized}Resources", currentFontTask)
runBefore("process${buildNameCapitalized}Resources", currentFontTask)
def currentSoundsTask = tasks.create(
name: "copy${buildNameCapitalized}Sounds",
type: Copy) {
from("${projectDir}/../../sounds/joined.wav")
from("${projectDir}/../../sounds/left.wav")
from("${projectDir}/../../sounds/outgoingRinging.wav")
from("${projectDir}/../../sounds/outgoingStart.wav")
from("${projectDir}/../../sounds/rejected.wav")
into("${bundlePath}/assets/sounds")
}
currentSoundsTask.dependsOn("merge${buildNameCapitalized}Resources")
currentSoundsTask.dependsOn("merge${buildNameCapitalized}Assets")
runBefore("processArmeabi-v7a${buildNameCapitalized}Resources", currentSoundsTask)
runBefore("processX86${buildNameCapitalized}Resources", currentSoundsTask)
runBefore("processUniversal${buildNameCapitalized}Resources", currentSoundsTask)
runBefore("process${buildNameCapitalized}Resources", currentSoundsTask)
// Bundle JavaScript and React resources.
// (adapted from react-native/react.gradle)
//

View File

@@ -10,6 +10,7 @@
<uses-permission android:name="android.permission.RECORD_AUDIO" />
<uses-permission android:name="android.permission.SYSTEM_ALERT_WINDOW" />
<uses-permission android:name="android.permission.WAKE_LOCK" />
<uses-permission android:name="android.permission.ACCESS_WIFI_STATE" />
<uses-feature android:glEsVersion="0x00020000" android:required="true" />
<uses-feature

View File

@@ -5,11 +5,13 @@
package org.jitsi.meet.sdk;
import android.content.ActivityNotFoundException;
import android.content.Context;
import android.content.Intent;
import android.net.Uri;
import android.provider.Settings;
import com.facebook.react.bridge.Promise;
import com.facebook.react.bridge.ReactApplicationContext;
import com.facebook.react.bridge.ReactContextBaseJavaModule;
import com.facebook.react.bridge.ReactMethod;
@@ -25,7 +27,7 @@ class AndroidSettingsModule extends ReactContextBaseJavaModule {
}
@ReactMethod
public void open() {
public void open(Promise promise) {
Context context = getReactApplicationContext();
Intent intent = new Intent();
@@ -34,6 +36,15 @@ class AndroidSettingsModule extends ReactContextBaseJavaModule {
intent.setData(
Uri.fromParts("package", context.getPackageName(), null));
context.startActivity(intent);
try {
context.startActivity(intent);
} catch (ActivityNotFoundException e) {
// Some devices may give an error here.
// https://developer.android.com/reference/android/provider/Settings.html#ACTION_APPLICATION_DETAILS_SETTINGS
promise.reject(e);
return;
}
promise.resolve(null);
}
}

View File

@@ -37,7 +37,6 @@ import com.facebook.react.bridge.ReactMethod;
import com.facebook.react.bridge.WritableArray;
import com.facebook.react.bridge.WritableMap;
import java.util.Collections;
import java.util.HashMap;
import java.util.HashSet;
import java.util.Map;
@@ -73,13 +72,20 @@ class AudioModeModule extends ReactContextBaseJavaModule {
private static final int VIDEO_CALL = 2;
/**
*
* Constant defining the action for plugging in a headset. This is used on
* our device detection system for API < 23.
*/
private static final String ACTION_HEADSET_PLUG
= (Build.VERSION.SDK_INT >= 21)
? AudioManager.ACTION_HEADSET_PLUG
: Intent.ACTION_HEADSET_PLUG;
/**
* Constant defining a USB headset. Only available on API level >= 26.
* The value of: AudioDeviceInfo.TYPE_USB_HEADSET
*/
private static final int TYPE_USB_HEADSET = 22;
/**
* The name of {@code AudioModeModule} to be used in the React Native
* bridge.
@@ -134,6 +140,7 @@ class AudioModeModule extends ReactContextBaseJavaModule {
break;
case AudioDeviceInfo.TYPE_WIRED_HEADPHONES:
case AudioDeviceInfo.TYPE_WIRED_HEADSET:
case TYPE_USB_HEADSET:
devices.add(DEVICE_HEADPHONES);
break;
}
@@ -181,7 +188,7 @@ class AudioModeModule extends ReactContextBaseJavaModule {
/**
* List of currently available audio devices.
*/
private Set<String> availableDevices = Collections.emptySet();
private Set<String> availableDevices = new HashSet<>();
/**
* Currently selected device.
@@ -300,7 +307,7 @@ class AudioModeModule extends ReactContextBaseJavaModule {
* Only used on Android < M. Runs on the main thread.
*/
void onBluetoothDeviceChange() {
if (bluetoothHeadsetMonitor.isHeadsetAvailable()) {
if (bluetoothHeadsetMonitor != null && bluetoothHeadsetMonitor.isHeadsetAvailable()) {
availableDevices.add(DEVICE_BLUETOOTH);
} else {
availableDevices.remove(DEVICE_BLUETOOTH);

View File

@@ -21,9 +21,7 @@ import com.facebook.react.bridge.ReactContextBaseJavaModule;
import com.facebook.react.bridge.ReactMethod;
import com.facebook.react.bridge.ReadableMap;
import com.facebook.react.bridge.ReadableMapKeySetIterator;
import org.jitsi.meet.sdk.JitsiMeetView;
import org.jitsi.meet.sdk.JitsiMeetViewListener;
import com.facebook.react.bridge.UiThreadUtil;
import java.lang.reflect.InvocationTargetException;
import java.lang.reflect.Method;
@@ -112,7 +110,38 @@ class ExternalAPIModule extends ReactContextBaseJavaModule {
}
/**
* Dispatches an event that occurred on JavaScript to the view's listener.
* The internal processing for the URL of the current conference set on the
* associated {@link JitsiMeetView}.
*
* @param eventName the name of the external API event to be processed
* @param eventData the details/specifics of the event to process determined
* by/associated with the specified {@code eventName}.
* @param view the {@link JitsiMeetView} instance.
*/
private void maybeSetViewURL(
String eventName,
ReadableMap eventData,
JitsiMeetView view) {
switch(eventName) {
case "CONFERENCE_WILL_JOIN":
view.setURL(eventData.getString("url"));
break;
case "CONFERENCE_FAILED":
case "CONFERENCE_WILL_LEAVE":
case "LOAD_CONFIG_ERROR":
String url = eventData.getString("url");
if (url != null && url.equals(view.getURL())) {
view.setURL(null);
}
break;
}
}
/**
* Dispatches an event that occurred on the JavaScript side of the SDK to
* the specified {@link JitsiMeetView}'s listener.
*
* @param name The name of the event.
* @param data The details/specifics of the event to send determined
@@ -120,7 +149,51 @@ class ExternalAPIModule extends ReactContextBaseJavaModule {
* @param scope
*/
@ReactMethod
public void sendEvent(String name, ReadableMap data, String scope) {
public void sendEvent(final String name,
final ReadableMap data,
final String scope) {
// The JavaScript App needs to provide uniquely identifying information
// to the native ExternalAPI module so that the latter may match the
// former to the native JitsiMeetView which hosts it.
JitsiMeetView view = JitsiMeetView.findViewByExternalAPIScope(scope);
if (view == null) {
return;
}
// XXX The JitsiMeetView property URL was introduced in order to address
// an exception in the Picture-in-Picture functionality which arose
// because of delays related to bridging between JavaScript and Java. To
// reduce these delays do not wait for the call to be transfered to the
// UI thread.
maybeSetViewURL(name, data, view);
// Make sure JitsiMeetView's listener is invoked on the UI thread. It
// was requested by SDK consumers.
if (UiThreadUtil.isOnUiThread()) {
sendEventOnUiThread(name, data, scope);
} else {
UiThreadUtil.runOnUiThread(new Runnable() {
@Override
public void run() {
sendEventOnUiThread(name, data, scope);
}
});
}
}
/**
* Dispatches an event that occurred on the JavaScript side of the SDK to
* the specified {@link JitsiMeetView}'s listener on the UI thread.
*
* @param name The name of the event.
* @param data The details/specifics of the event to send determined
* by/associated with the specified {@code name}.
* @param scope
*/
private void sendEventOnUiThread(final String name,
final ReadableMap data,
final String scope) {
// The JavaScript App needs to provide uniquely identifying information
// to the native ExternalAPI module so that the latter may match the
// former to the native JitsiMeetView which hosts it.
@@ -141,7 +214,16 @@ class ExternalAPIModule extends ReactContextBaseJavaModule {
if (method != null) {
try {
method.invoke(listener, toHashMap(data));
} catch (IllegalAccessException | InvocationTargetException e) {
} catch (IllegalAccessException e) {
// FIXME There was a multicatch for IllegalAccessException and
// InvocationTargetException, but Android Studio complained
// with: "Multi-catch with these reflection exceptions requires
// API level 19 (current min is 16) because they get compiled to
// the common but new super type ReflectiveOperationException.
// As a workaround either create individual catch statements, or
// catch Exception."
throw new RuntimeException(e);
} catch (InvocationTargetException e) {
throw new RuntimeException(e);
}
}

View File

@@ -23,25 +23,25 @@ import android.os.Bundle;
import android.provider.Settings;
import android.support.annotation.Nullable;
import android.support.v7.app.AppCompatActivity;
import android.view.KeyEvent;
import com.facebook.react.ReactInstanceManager;
import com.facebook.react.modules.core.DefaultHardwareBackBtnHandler;
import java.net.URL;
import com.facebook.react.modules.core.DefaultHardwareBackBtnHandler;
/**
* Base Activity for applications integrating Jitsi Meet at a higher level. It
* contains all the required wiring between the {@code JKConferenceView} and
* contains all the required wiring between the {@code JitsiMeetView} and
* the Activity lifecycle methods already implemented.
*
* In this activity we use a single {@code JKConferenceView} instance. This
* In this activity we use a single {@code JitsiMeetView} instance. This
* instance gives us access to a view which displays the welcome page and the
* conference itself. All lifetime methods associated with this Activity are
* hooked to the React Native subsystem via proxy calls through the
* {@code JKConferenceView} static methods.
* {@code JitsiMeetView} static methods.
*/
public class JitsiMeetActivity
extends AppCompatActivity {
public class JitsiMeetActivity extends AppCompatActivity {
/**
* The request code identifying requests for the permission to draw on top
* of other apps. The value must be 16-bit and is arbitrarily chosen here.
@@ -67,6 +67,12 @@ public class JitsiMeetActivity
*/
private JitsiMeetView view;
/**
* Whether Picture-in-Picture is enabled. The value is used only while
* {@link #view} equals {@code null}.
*/
private Boolean pictureInPictureEnabled;
/**
* Whether the Welcome page is enabled. The value is used only while
* {@link #view} equals {@code null}.
@@ -89,6 +95,17 @@ public class JitsiMeetActivity
return view == null ? defaultURL : view.getDefaultURL();
}
/**
*
* @see JitsiMeetView#getPictureInPictureEnabled()
*/
public boolean getPictureInPictureEnabled() {
return
view == null
? pictureInPictureEnabled
: view.getPictureInPictureEnabled();
}
/**
*
* @see JitsiMeetView#getWelcomePageEnabled()
@@ -105,6 +122,11 @@ public class JitsiMeetActivity
JitsiMeetView view = initializeView();
if (view != null) {
// XXX Allow extenders who override initializeView() to configure
// the view before the first loadURL(). Probably works around a
// problem related to ReactRootView#setAppProperties().
view.loadURL(null);
this.view = view;
setContentView(this.view);
}
@@ -121,10 +143,12 @@ public class JitsiMeetActivity
// XXX Before calling JitsiMeetView#loadURL, make sure to call whatever
// is documented to need such an order in order to take effect:
view.setDefaultURL(defaultURL);
if (pictureInPictureEnabled != null) {
view.setPictureInPictureEnabled(
pictureInPictureEnabled.booleanValue());
}
view.setWelcomePageEnabled(welcomePageEnabled);
view.loadURL(null);
return view;
}
@@ -199,17 +223,26 @@ public class JitsiMeetActivity
JitsiMeetView.onHostDestroy(this);
}
// ReactAndroid/src/main/java/com/facebook/react/ReactActivity.java
@Override
public void onNewIntent(Intent intent) {
JitsiMeetView.onNewIntent(intent);
public boolean onKeyUp(int keyCode, KeyEvent event) {
ReactInstanceManager reactInstanceManager;
if (!super.onKeyUp(keyCode, event)
&& BuildConfig.DEBUG
&& (reactInstanceManager
= ReactInstanceManagerHolder.getReactInstanceManager())
!= null
&& keyCode == KeyEvent.KEYCODE_MENU) {
reactInstanceManager.showDevOptionsDialog();
return true;
}
return false;
}
@Override
protected void onPause() {
super.onPause();
JitsiMeetView.onHostPause(this);
defaultBackButtonImpl = null;
public void onNewIntent(Intent intent) {
JitsiMeetView.onNewIntent(intent);
}
@Override
@@ -220,6 +253,21 @@ public class JitsiMeetActivity
JitsiMeetView.onHostResume(this, defaultBackButtonImpl);
}
@Override
public void onStop() {
super.onStop();
JitsiMeetView.onHostPause(this);
defaultBackButtonImpl = null;
}
@Override
protected void onUserLeaveHint() {
if (view != null) {
view.onUserLeaveHint();
}
}
/**
*
* @see JitsiMeetView#setDefaultURL(URL)
@@ -232,6 +280,19 @@ public class JitsiMeetActivity
}
}
/**
*
* @see JitsiMeetView#setPictureInPictureEnabled(boolean)
*/
public void setPictureInPictureEnabled(boolean pictureInPictureEnabled) {
if (view == null) {
this.pictureInPictureEnabled
= Boolean.valueOf(pictureInPictureEnabled);
} else {
view.setPictureInPictureEnabled(pictureInPictureEnabled);
}
}
/**
*
* @see JitsiMeetView#setWelcomePageEnabled(boolean)

View File

@@ -17,26 +17,24 @@
package org.jitsi.meet.sdk;
import android.app.Activity;
import android.app.Application;
import android.content.Context;
import android.content.Intent;
import android.net.Uri;
import android.os.Bundle;
import android.support.annotation.NonNull;
import android.support.annotation.Nullable;
import android.util.Log;
import android.widget.FrameLayout;
import com.facebook.react.ReactInstanceManager;
import com.facebook.react.ReactRootView;
import com.facebook.react.bridge.NativeModule;
import com.facebook.react.bridge.ReactApplicationContext;
import com.facebook.react.common.LifecycleState;
import com.facebook.react.modules.core.DefaultHardwareBackBtnHandler;
import com.rnimmersive.RNImmersiveModule;
import org.jitsi.meet.sdk.invite.InviteController;
import java.net.URL;
import java.util.Arrays;
import java.util.Collections;
import java.util.List;
import java.util.Set;
import java.util.UUID;
import java.util.WeakHashMap;
@@ -49,25 +47,14 @@ public class JitsiMeetView extends FrameLayout {
private static final int BACKGROUND_COLOR = 0xFF111111;
/**
* React Native bridge. The instance manager allows embedding applications
* to create multiple root views off the same JavaScript bundle.
* The {@link Log} tag which identifies the source of the log messages of
* {@code JitsiMeetView}.
*/
private static ReactInstanceManager reactInstanceManager;
private final static String TAG = JitsiMeetView.class.getSimpleName();
private static final Set<JitsiMeetView> views
= Collections.newSetFromMap(new WeakHashMap<JitsiMeetView, Boolean>());
private static List<NativeModule> createNativeModules(
ReactApplicationContext reactContext) {
return Arrays.<NativeModule>asList(
new AndroidSettingsModule(reactContext),
new AppInfoModule(reactContext),
new AudioModeModule(reactContext),
new ExternalAPIModule(reactContext),
new ProximityModule(reactContext)
);
}
public static JitsiMeetView findViewByExternalAPIScope(
String externalAPIScope) {
synchronized (views) {
@@ -81,39 +68,6 @@ public class JitsiMeetView extends FrameLayout {
return null;
}
/**
* Internal method to initialize the React Native instance manager. We
* create a single instance in order to load the JavaScript bundle a single
* time. All {@code ReactRootView} instances will be tied to the one and
* only {@code ReactInstanceManager}.
*
* @param application {@code Application} instance which is running.
*/
private static void initReactInstanceManager(Application application) {
reactInstanceManager
= ReactInstanceManager.builder()
.setApplication(application)
.setBundleAssetName("index.android.bundle")
.setJSMainModulePath("index.android")
.addPackage(new com.corbt.keepawake.KCKeepAwakePackage())
.addPackage(new com.facebook.react.shell.MainReactPackage())
.addPackage(new com.oblador.vectoricons.VectorIconsPackage())
.addPackage(new com.ocetnik.timer.BackgroundTimerPackage())
.addPackage(new com.oney.WebRTCModule.WebRTCModulePackage())
.addPackage(new com.RNFetchBlob.RNFetchBlobPackage())
.addPackage(new com.rnimmersive.RNImmersivePackage())
.addPackage(new ReactPackageAdapter() {
@Override
public List<NativeModule> createNativeModules(
ReactApplicationContext reactContext) {
return JitsiMeetView.createNativeModules(reactContext);
}
})
.setUseDeveloperSupport(BuildConfig.DEBUG)
.setInitialLifecycleState(LifecycleState.RESUMED)
.build();
}
/**
* Loads a specific URL {@code String} in all existing
* {@code JitsiMeetView}s.
@@ -148,6 +102,9 @@ public class JitsiMeetView extends FrameLayout {
* implementation.
*/
public static boolean onBackPressed() {
ReactInstanceManager reactInstanceManager
= ReactInstanceManagerHolder.getReactInstanceManager();
if (reactInstanceManager == null) {
return false;
} else {
@@ -164,6 +121,9 @@ public class JitsiMeetView extends FrameLayout {
* @param activity {@code Activity} being destroyed.
*/
public static void onHostDestroy(Activity activity) {
ReactInstanceManager reactInstanceManager
= ReactInstanceManagerHolder.getReactInstanceManager();
if (reactInstanceManager != null) {
reactInstanceManager.onHostDestroy(activity);
}
@@ -176,6 +136,9 @@ public class JitsiMeetView extends FrameLayout {
* @param activity {@code Activity} being paused.
*/
public static void onHostPause(Activity activity) {
ReactInstanceManager reactInstanceManager
= ReactInstanceManagerHolder.getReactInstanceManager();
if (reactInstanceManager != null) {
reactInstanceManager.onHostPause(activity);
}
@@ -202,6 +165,9 @@ public class JitsiMeetView extends FrameLayout {
public static void onHostResume(
Activity activity,
DefaultHardwareBackBtnHandler defaultBackButtonImpl) {
ReactInstanceManager reactInstanceManager
= ReactInstanceManagerHolder.getReactInstanceManager();
if (reactInstanceManager != null) {
reactInstanceManager.onHostResume(activity, defaultBackButtonImpl);
}
@@ -230,6 +196,9 @@ public class JitsiMeetView extends FrameLayout {
return;
}
ReactInstanceManager reactInstanceManager
= ReactInstanceManagerHolder.getReactInstanceManager();
if (reactInstanceManager != null) {
reactInstanceManager.onNewIntent(intent);
}
@@ -250,17 +219,37 @@ public class JitsiMeetView extends FrameLayout {
*/
private final String externalAPIScope;
/**
* The entry point into the invite feature of Jitsi Meet. The Java
* counterpart of the JavaScript {@code InviteButton}.
*/
private final InviteController inviteController;
/**
* {@link JitsiMeetViewListener} instance for reporting events occurring in
* Jitsi Meet.
*/
private JitsiMeetViewListener listener;
/**
* Whether Picture-in-Picture is enabled. If {@code null}, defaults to
* {@code true} iff the Android platform supports Picture-in-Picture
* natively.
*/
private Boolean pictureInPictureEnabled;
/**
* React Native root view.
*/
private ReactRootView reactRootView;
/**
* The URL of the current conference.
*/
// XXX Currently, one thread writes and one thread reads, so it should be
// fine to have this field volatile without additional synchronization.
private volatile String url;
/**
* Whether the Welcome page is enabled.
*/
@@ -271,15 +260,18 @@ public class JitsiMeetView extends FrameLayout {
setBackgroundColor(BACKGROUND_COLOR);
if (reactInstanceManager == null) {
initReactInstanceManager(((Activity) context).getApplication());
}
ReactInstanceManagerHolder.initReactInstanceManager(
((Activity) context).getApplication());
// Hook this JitsiMeetView into ExternalAPI.
externalAPIScope = UUID.randomUUID().toString();
synchronized (views) {
views.add(this);
}
// The entry point into the invite feature of Jitsi Meet. The Java
// counterpart of the JavaScript InviteButton.
inviteController = new InviteController(externalAPIScope);
}
/**
@@ -310,6 +302,19 @@ public class JitsiMeetView extends FrameLayout {
return defaultURL;
}
/**
* Gets the {@link InviteController} which represents the entry point into
* the invite feature of Jitsi Meet and is the Java counterpart of the
* JavaScript {@code InviteButton}.
*
* @return the {@link InviteController} which represents the entry point
* into the invite feature of Jitsi Meet and is the Java counterpart of the
* JavaScript {@code InviteButton}
*/
public InviteController getInviteController() {
return inviteController;
}
/**
* Gets the {@link JitsiMeetViewListener} set on this {@code JitsiMeetView}.
*
@@ -320,6 +325,34 @@ public class JitsiMeetView extends FrameLayout {
return listener;
}
/**
* Gets whether Picture-in-Picture is enabled. Picture-in-Picture is
* natively supported on Android API >= 26 (Oreo), so it should not be
* enabled on older platform versions.
*
* @return If Picture-in-Picture is enabled, {@code true}; {@code false},
* otherwise.
*/
public boolean getPictureInPictureEnabled() {
return
PictureInPictureModule.isPictureInPictureSupported()
&& (pictureInPictureEnabled == null
|| pictureInPictureEnabled.booleanValue());
}
/**
* Gets the URL of the current conference.
*
* XXX The method is meant for internal purposes only at the time of this
* writing because there is no equivalent API on iOS.
*
* @return the URL {@code String} of the current conference if any;
* otherwise, {@code null}.
*/
String getURL() {
return url;
}
/**
* Gets whether the Welcome page is enabled. If {@code true}, the Welcome
* page is rendered when this {@code JitsiMeetView} is not at a URL
@@ -361,12 +394,32 @@ public class JitsiMeetView extends FrameLayout {
if (defaultURL != null) {
props.putString("defaultURL", defaultURL.toString());
}
// externalAPIScope
props.putString("externalAPIScope", externalAPIScope);
// inviteController
InviteController inviteController = getInviteController();
if (inviteController != null) {
props.putBoolean(
"addPeopleEnabled",
inviteController.isAddPeopleEnabled());
props.putBoolean(
"dialOutEnabled",
inviteController.isDialOutEnabled());
}
// pictureInPictureEnabled
props.putBoolean(
"pictureInPictureEnabled",
getPictureInPictureEnabled());
// url
if (urlObject != null) {
props.putBundle("url", urlObject);
}
// welcomePageEnabled
props.putBoolean("welcomePageEnabled", welcomePageEnabled);
@@ -384,7 +437,9 @@ public class JitsiMeetView extends FrameLayout {
if (reactRootView == null) {
reactRootView = new ReactRootView(getContext());
reactRootView.startReactApplication(
reactInstanceManager, "App", props);
ReactInstanceManagerHolder.getReactInstanceManager(),
"App",
props);
reactRootView.setBackgroundColor(BACKGROUND_COLOR);
addView(reactRootView);
} else {
@@ -412,6 +467,69 @@ public class JitsiMeetView extends FrameLayout {
loadURLObject(urlObject);
}
/**
* Activity lifecycle method which should be called from
* {@code Activity.onUserLeaveHint} so we can do the required internal
* processing.
*
* This is currently not mandatory, but if used will provide automatic
* handling of the picture in picture mode when user minimizes the app. It
* will be probably the most useful in case the app is using the welcome
* page.
*/
public void onUserLeaveHint() {
if (getPictureInPictureEnabled() && getURL() != null) {
PictureInPictureModule pipModule
= ReactInstanceManagerHolder.getNativeModule(
PictureInPictureModule.class);
if (pipModule != null) {
try {
pipModule.enterPictureInPicture();
} catch (RuntimeException re) {
Log.e(TAG, "onUserLeaveHint: failed to enter PiP mode", re);
}
}
}
}
/**
* Called when the window containing this view gains or loses focus.
*
* @param hasFocus If the window of this view now has focus, {@code true};
* otherwise, {@code false}.
*/
@Override
public void onWindowFocusChanged(boolean hasFocus) {
super.onWindowFocusChanged(hasFocus);
// https://github.com/mockingbot/react-native-immersive#restore-immersive-state
// FIXME The singleton pattern employed by RNImmersiveModule is not
// advisable because a react-native mobule is consumable only after its
// BaseJavaModule#initialize() has completed and here we have no
// knowledge of whether the precondition is really met.
RNImmersiveModule immersive = RNImmersiveModule.getInstance();
if (hasFocus && immersive != null) {
try {
immersive.emitImmersiveStateChangeEvent();
} catch (RuntimeException re) {
// FIXME I don't know how to check myself whether
// BaseJavaModule#initialize() has been invoked and thus
// RNImmersiveModule is consumable. A safe workaround is to
// swallow the failure because the whole full-screen/immersive
// functionality is brittle anyway, akin to the icing on the
// cake, and has been working without onWindowFocusChanged for a
// very long time.
Log.e(
TAG,
"RNImmersiveModule#emitImmersiveStateChangeEvent() failed!",
re);
}
}
}
/**
* Sets the default base {@code URL} used to join a conference when a
* partial URL (e.g. a room name only) is specified to
@@ -436,6 +554,31 @@ public class JitsiMeetView extends FrameLayout {
this.listener = listener;
}
/**
* Sets whether Picture-in-Picture is enabled. Because Picture-in-Picture is
* natively supported only since certain platform versions, specifying
* {@code true} will have no effect on unsupported platform versions.
*
* @param pictureInPictureEnabled To enable Picture-in-Picture,
* {@code true}; otherwise, {@code false}.
*/
public void setPictureInPictureEnabled(boolean pictureInPictureEnabled) {
this.pictureInPictureEnabled = Boolean.valueOf(pictureInPictureEnabled);
}
/**
* Sets the URL of the current conference.
*
* XXX The method is meant for internal purposes only. It does not
* {@code loadURL}, it merely remembers the specified URL.
*
* @param url the URL {@code String} which to be set as the URL of the
* current conference.
*/
void setURL(String url) {
this.url = url;
}
/**
* Sets whether the Welcome page is enabled. Must be called before
* {@link #loadURL(URL)} for it to take effect.

View File

@@ -0,0 +1,86 @@
package org.jitsi.meet.sdk;
import android.app.Activity;
import android.app.PictureInPictureParams;
import android.os.Build;
import android.util.Log;
import android.util.Rational;
import com.facebook.react.bridge.Promise;
import com.facebook.react.bridge.ReactApplicationContext;
import com.facebook.react.bridge.ReactContextBaseJavaModule;
import com.facebook.react.bridge.ReactMethod;
public class PictureInPictureModule extends ReactContextBaseJavaModule {
private final static String TAG = "PictureInPicture";
static boolean isPictureInPictureSupported() {
return Build.VERSION.SDK_INT >= Build.VERSION_CODES.O;
}
public PictureInPictureModule(ReactApplicationContext reactContext) {
super(reactContext);
}
/**
* Enters Picture-in-Picture (mode) for the current {@link Activity}.
* Supported on Android API >= 26 (Oreo) only.
*
* @throws IllegalStateException if {@link #isPictureInPictureSupported()}
* returns {@code false} or if {@link #getCurrentActivity()} returns
* {@code null}.
* @throws RuntimeException if
* {@link Activity#enterPictureInPictureMode(PictureInPictureParams)} fails.
* That method can also throw a {@link RuntimeException} in various cases,
* including when the activity is not visible (paused or stopped), if the
* screen is locked or if the user has an activity pinned.
*/
public void enterPictureInPicture() {
if (!isPictureInPictureSupported()) {
throw new IllegalStateException("Picture-in-Picture not supported");
}
Activity currentActivity = getCurrentActivity();
if (currentActivity == null) {
throw new IllegalStateException("No current Activity!");
}
Log.d(TAG, "Entering Picture-in-Picture");
PictureInPictureParams.Builder builder
= new PictureInPictureParams.Builder()
.setAspectRatio(new Rational(1, 1));
// https://developer.android.com/reference/android/app/Activity.html#enterPictureInPictureMode(android.app.PictureInPictureParams)
//
// The system may disallow entering picture-in-picture in various cases,
// including when the activity is not visible, if the screen is locked
// or if the user has an activity pinned.
if (!currentActivity.enterPictureInPictureMode(builder.build())) {
throw new RuntimeException("Failed to enter Picture-in-Picture");
}
}
/**
* Enters Picture-in-Picture (mode) for the current {@link Activity}.
* Supported on Android API >= 26 (Oreo) only.
*
* @param promise a {@code Promise} which will resolve with a {@code null}
* value upon success, and an {@link Exception} otherwise.
*/
@ReactMethod
public void enterPictureInPicture(Promise promise) {
try {
enterPictureInPicture();
promise.resolve(null);
} catch (RuntimeException re) {
promise.reject(re);
}
}
@Override
public String getName() {
return TAG;
}
}

View File

@@ -0,0 +1,43 @@
/*
* Copyright @ 2017-present Atlassian Pty Ltd
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jitsi.meet.sdk;
import android.support.annotation.Nullable;
import com.facebook.react.bridge.ReactContext;
import com.facebook.react.modules.core.DeviceEventManagerModule;
public class ReactContextUtils {
public static boolean emitEvent(
ReactContext reactContext,
String eventName,
@Nullable Object data) {
if (reactContext == null) {
// XXX If no ReactContext is specified, emit through the
// ReactContext of ReactInstanceManager. ReactInstanceManager
// cooperates with ReactContextUtils i.e. ReactInstanceManager will
// not invoke ReactContextUtils without a ReactContext.
return ReactInstanceManagerHolder.emitEvent(eventName, data);
}
reactContext
.getJSModule(DeviceEventManagerModule.RCTDeviceEventEmitter.class)
.emit(eventName, data);
return true;
}
}

View File

@@ -0,0 +1,145 @@
/*
* Copyright @ 2017-present Atlassian Pty Ltd
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jitsi.meet.sdk;
import android.app.Application;
import android.support.annotation.Nullable;
import com.facebook.react.ReactInstanceManager;
import com.facebook.react.bridge.NativeModule;
import com.facebook.react.bridge.ReactContext;
import com.facebook.react.bridge.ReactApplicationContext;
import com.facebook.react.common.LifecycleState;
import java.util.Arrays;
import java.util.List;
public class ReactInstanceManagerHolder {
/**
* React Native bridge. The instance manager allows embedding applications
* to create multiple root views off the same JavaScript bundle.
*/
private static ReactInstanceManager reactInstanceManager;
private static List<NativeModule> createNativeModules(
ReactApplicationContext reactContext) {
return Arrays.<NativeModule>asList(
new AndroidSettingsModule(reactContext),
new AppInfoModule(reactContext),
new AudioModeModule(reactContext),
new ExternalAPIModule(reactContext),
new PictureInPictureModule(reactContext),
new ProximityModule(reactContext),
new WiFiStatsModule(reactContext),
new org.jitsi.meet.sdk.invite.InviteModule(reactContext),
new org.jitsi.meet.sdk.net.NAT64AddrInfoModule(reactContext)
);
}
/**
* Helper function to send an event to JavaScript.
*
* @param eventName {@code String} containing the event name.
* @param data {@code Object} optional ancillary data for the event.
*/
public static boolean emitEvent(
String eventName,
@Nullable Object data) {
ReactInstanceManager reactInstanceManager
= ReactInstanceManagerHolder.getReactInstanceManager();
if (reactInstanceManager != null) {
ReactContext reactContext
= reactInstanceManager.getCurrentReactContext();
return
reactContext != null
&& ReactContextUtils.emitEvent(
reactContext,
eventName,
data);
}
return false;
}
/**
* Finds a native React module for given class.
*
* @param nativeModuleClass the native module's class for which an instance
* is to be retrieved from the {@link #reactInstanceManager}.
* @param <T> the module's type.
* @return {@link NativeModule} instance for given interface type or
* {@code null} if no instance for this interface is available, or if
* {@link #reactInstanceManager} has not been initialized yet.
*/
static <T extends NativeModule> T getNativeModule(
Class<T> nativeModuleClass) {
ReactContext reactContext
= reactInstanceManager != null
? reactInstanceManager.getCurrentReactContext() : null;
return reactContext != null
? reactContext.getNativeModule(nativeModuleClass) : null;
}
static ReactInstanceManager getReactInstanceManager() {
return reactInstanceManager;
}
/**
* Internal method to initialize the React Native instance manager. We
* create a single instance in order to load the JavaScript bundle a single
* time. All {@code ReactRootView} instances will be tied to the one and
* only {@code ReactInstanceManager}.
*
* @param application {@code Application} instance which is running.
*/
static void initReactInstanceManager(Application application) {
if (reactInstanceManager != null) {
return;
}
reactInstanceManager
= ReactInstanceManager.builder()
.setApplication(application)
.setBundleAssetName("index.android.bundle")
.setJSMainModulePath("index.android")
.addPackage(new com.calendarevents.CalendarEventsPackage())
.addPackage(new com.corbt.keepawake.KCKeepAwakePackage())
.addPackage(new com.facebook.react.shell.MainReactPackage())
.addPackage(new com.i18n.reactnativei18n.ReactNativeI18n())
.addPackage(new com.oblador.vectoricons.VectorIconsPackage())
.addPackage(new com.ocetnik.timer.BackgroundTimerPackage())
.addPackage(new com.oney.WebRTCModule.WebRTCModulePackage())
.addPackage(new com.RNFetchBlob.RNFetchBlobPackage())
.addPackage(new com.rnimmersive.RNImmersivePackage())
.addPackage(new com.zmxv.RNSound.RNSoundPackage())
.addPackage(new ReactPackageAdapter() {
@Override
public List<NativeModule> createNativeModules(
ReactApplicationContext reactContext) {
return
ReactInstanceManagerHolder.createNativeModules(
reactContext);
}
})
.setUseDeveloperSupport(BuildConfig.DEBUG)
.setInitialLifecycleState(LifecycleState.RESUMED)
.build();
}
}

View File

@@ -0,0 +1,208 @@
/*
* Copyright @ 2017-present Atlassian Pty Ltd
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jitsi.meet.sdk;
import android.content.Context;
import android.net.wifi.WifiInfo;
import android.net.wifi.WifiManager;
import android.os.Handler;
import android.os.Looper;
import android.util.Log;
import com.facebook.react.bridge.Promise;
import com.facebook.react.bridge.ReactApplicationContext;
import com.facebook.react.bridge.ReactContextBaseJavaModule;
import com.facebook.react.bridge.ReactMethod;
import org.json.JSONArray;
import org.json.JSONObject;
import java.net.InetAddress;
import java.net.NetworkInterface;
import java.net.SocketException;
import java.net.UnknownHostException;
import java.util.Enumeration;
/**
* Module exposing WiFi statistics.
*
* Gathers rssi, signal in percentage, timestamp and the addresses
* of the wifi device.
*/
class WiFiStatsModule extends ReactContextBaseJavaModule {
/**
* The name of {@code WiFiStatsModule} to be used in the React Native
* bridge.
*/
private static final String MODULE_NAME = "WiFiStats";
/**
* The {@code Log} tag {@code WiFiStatsModule} is to log messages with.
*/
static final String TAG = MODULE_NAME;
/**
* The scale used for the signal value.
* A level of the signal, given in the range
* of 0 to SIGNAL_LEVEL_SCALE-1 (both inclusive).
*/
public final static int SIGNAL_LEVEL_SCALE = 101;
/**
* {@link Handler} for running all operations on the main thread.
*/
private final Handler mainThreadHandler
= new Handler(Looper.getMainLooper());
/**
* Initializes a new module instance. There shall be a single instance of
* this module throughout the lifetime of the application.
*
* @param reactContext the {@link ReactApplicationContext} where this module
* is created.
*/
public WiFiStatsModule(ReactApplicationContext reactContext) {
super(reactContext);
}
/**
* Gets the name for this module to be used in the React Native bridge.
*
* @return a string with the module name.
*/
@Override
public String getName() {
return MODULE_NAME;
}
/**
* Returns the {@link InetAddress} represented by this int.
*
* @param value the int representation of the ip address.
* @return the {@link InetAddress}.
* @throws UnknownHostException - if IP address is of illegal length.
*/
public static InetAddress toInetAddress(int value)
throws UnknownHostException {
return InetAddress.getByAddress(
new byte[] {
(byte) value,
(byte) (value >> 8),
(byte) (value >> 16),
(byte) (value >> 24)
});
}
/**
* Public method to retrieve WiFi stats.
*
* @param promise a {@link Promise} which will be resolved if WiFi stats are
* retrieved successfully, and it will be rejected otherwise.
*/
@ReactMethod
public void getWiFiStats(final Promise promise) {
Runnable r = new Runnable() {
@Override
public void run() {
try {
Context context
= getReactApplicationContext().getApplicationContext();
WifiManager wifiManager
= (WifiManager) context
.getSystemService(Context.WIFI_SERVICE);
if (!wifiManager.isWifiEnabled()) {
promise.reject(new Exception("Wifi not enabled"));
return;
}
WifiInfo wifiInfo = wifiManager.getConnectionInfo();
if (wifiInfo.getNetworkId() == -1) {
promise.reject(new Exception("Wifi not connected"));
return;
}
int rssi = wifiInfo.getRssi();
int signalLevel
= WifiManager.calculateSignalLevel(
rssi, SIGNAL_LEVEL_SCALE);
JSONObject result = new JSONObject();
result.put("rssi", rssi)
.put("signal", signalLevel)
.put("timestamp",
String.valueOf(System.currentTimeMillis()));
JSONArray addresses = new JSONArray();
InetAddress wifiAddress
= toInetAddress(wifiInfo.getIpAddress());
try {
Enumeration<NetworkInterface> e
= NetworkInterface.getNetworkInterfaces();
while (e.hasMoreElements()) {
NetworkInterface networkInterface = e.nextElement();
boolean found = false;
// first check whether this is the desired interface
Enumeration<InetAddress> as
= networkInterface.getInetAddresses();
while (as.hasMoreElements()) {
InetAddress a = as.nextElement();
if(a.equals(wifiAddress)) {
found = true;
break;
}
}
if (found) {
// interface found let's put addresses
// to the result object
as = networkInterface.getInetAddresses();
while (as.hasMoreElements()) {
InetAddress a = as.nextElement();
if (a.isLinkLocalAddress())
continue;
addresses.put(a.getHostAddress());
}
}
}
} catch (SocketException e) {
Log.wtf(TAG,
"Unable to NetworkInterface.getNetworkInterfaces()"
);
}
result.put("addresses", addresses);
promise.resolve(result.toString());
Log.d(TAG, "WiFi stats: " + result.toString());
} catch (Throwable e) {
Log.e(TAG, "Failed to obtain wifi stats", e);
promise.reject(
new Exception("Failed to obtain wifi stats"));
}
}
};
mainThreadHandler.post(r);
}
}

View File

@@ -0,0 +1,204 @@
/*
* Copyright @ 2017-present Atlassian Pty Ltd
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jitsi.meet.sdk.invite;
import android.util.Log;
import com.facebook.react.bridge.ReactApplicationContext;
import com.facebook.react.bridge.ReadableArray;
import com.facebook.react.bridge.ReadableMap;
import com.facebook.react.bridge.WritableArray;
import com.facebook.react.bridge.WritableNativeArray;
import com.facebook.react.bridge.WritableNativeMap;
import java.lang.ref.WeakReference;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import java.util.UUID;
/**
* Controller object used by native code to query and submit user selections for the user invitation flow.
*/
public class AddPeopleController {
/**
* The AddPeopleControllerListener for this controller, used to pass query
* results back to the native code that initiated the query.
*/
private AddPeopleControllerListener listener;
/**
* Local cache of search query results. Used to re-hydrate the list
* of selected items based on their ids passed to inviteById
* in order to pass the full item maps back to the JitsiMeetView during submission.
*/
private final Map<String, ReadableMap> items = new HashMap<>();
private final WeakReference<InviteController> owner;
private final WeakReference<ReactApplicationContext> reactContext;
/**
* Randomly generated UUID, used for identification in the InviteModule
*/
private final String uuid = UUID.randomUUID().toString();
public AddPeopleController(
InviteController owner,
ReactApplicationContext reactContext) {
this.owner = new WeakReference<>(owner);
this.reactContext = new WeakReference<>(reactContext);
}
/**
* Cancel the invitation flow and free memory allocated to the
* AddPeopleController. After calling this method, this object is invalid -
* a new AddPeopleController will be passed to the caller through
* beginAddPeople.
*/
public void endAddPeople() {
InviteController owner = this.owner.get();
if (owner != null) {
owner.endAddPeople(this);
}
}
/**
*
* @return the AddPeopleControllerListener for this controller, used to pass
* query results back to the native code that initiated the query.
*/
public AddPeopleControllerListener getListener() {
return listener;
}
final ReactApplicationContext getReactApplicationContext() {
return reactContext.get();
}
/**
*
* @return the unique identifier for this AddPeopleController
*/
public String getUuid() {
return uuid;
}
/**
* Send invites to selected users based on their item ids
*
* @param ids
*/
public void inviteById(List<String> ids) {
InviteController owner = this.owner.get();
if (owner != null) {
WritableArray invitees = new WritableNativeArray();
for(int i = 0, size = ids.size(); i < size; i++) {
String id = ids.get(i);
if(items.containsKey(id)) {
WritableNativeMap map = new WritableNativeMap();
map.merge(items.get(id));
invitees.pushMap(map);
} else {
// If the id doesn't exist in the map, we can't do anything,
// so just skip it.
}
}
owner.invite(this, invitees);
}
}
void inviteSettled(ReadableArray failedInvitees) {
AddPeopleControllerListener listener = getListener();
if (listener != null) {
ArrayList<Map<String, Object>> jFailedInvitees = new ArrayList<>();
for (int i = 0, size = failedInvitees.size(); i < size; ++i) {
jFailedInvitees.add(failedInvitees.getMap(i).toHashMap());
}
listener.onInviteSettled(this, jFailedInvitees);
}
}
/**
* Start a search for entities to invite with the given query. Results will
* be returned through the associated AddPeopleControllerListener's
* onReceivedResults method.
*
* @param query
*/
public void performQuery(String query) {
InviteController owner = this.owner.get();
if (owner != null) {
owner.performQuery(this, query);
}
}
/**
* Caches results received by the search into a local map for use
* later when the items are submitted. Submission requires the full
* map of information, but only the IDs are returned back to the delegate.
* Using this map means we don't have to send the whole map back to the delegate.
*
* @param results
* @param query
*/
void receivedResultsForQuery(ReadableArray results, String query) {
AddPeopleControllerListener listener = getListener();
if (listener != null) {
List<Map<String, Object>> jvmResults = new ArrayList<>();
// cache results for use in submission later
// convert to jvm array
for(int i = 0; i < results.size(); i++) {
ReadableMap map = results.getMap(i);
if(map.hasKey("id")) {
items.put(map.getString("id"), map);
} else if(map.hasKey("type") && map.getString("type").equals("phone") && map.hasKey("number")) {
items.put(map.getString("number"), map);
} else {
Log.w("AddPeopleController", "Received result without id and that was not a phone number, so not adding it to suggestions: " + map);
}
jvmResults.add(map.toHashMap());
}
listener.onReceivedResults(this, jvmResults, query);
}
}
/**
* Sets the AddPeopleControllerListener for this controller, used to pass
* query results back to the native code that initiated the query.
*
* @param listener
*/
public void setListener(AddPeopleControllerListener listener) {
this.listener = listener;
}
}

View File

@@ -0,0 +1,56 @@
/*
* Copyright @ 2017-present Atlassian Pty Ltd
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jitsi.meet.sdk.invite;
import java.util.List;
import java.util.Map;
public interface AddPeopleControllerListener {
/**
* Called when the call to {@link AddPeopleController#inviteById(List)}
* completes.
*
* @param addPeopleController the active {@link AddPeopleController} for
* this invite flow. This object should be cleaned up by calling
* {@link AddPeopleController#endAddPeople()} if the user exits the invite
* flow. Otherwise, it can stay active if the user will attempt to invite
* @param failedInvitees a {@code List} of {@code Map<String, Object>}
* dictionaries that represent the invitations that failed. The data type of
* the objects is identical to the results returned in onReceivedResuls.
*/
void onInviteSettled(
AddPeopleController addPeopleController,
List<Map<String, Object>> failedInvitees);
/**
* Called when results are received for a query called through
* AddPeopleController.query().
*
* @param addPeopleController
* @param results a List of Map<String, Object> objects that represent items
* returned by the query. The object at key "type" describes the type of
* item: "user", "videosipgw" (conference room), or "phone". "user" types
* have properties at "id", "name", and "avatar". "videosipgw" types have
* properties at "id" and "name". "phone" types have properties at "number",
* "title", "and "subtitle"
* @param query the query that generated the given results
*/
void onReceivedResults(
AddPeopleController addPeopleController,
List<Map<String, Object>> results,
String query);
}

View File

@@ -0,0 +1,265 @@
/*
* Copyright @ 2017-present Atlassian Pty Ltd
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jitsi.meet.sdk.invite;
import com.facebook.react.bridge.Arguments;
import com.facebook.react.bridge.ReactApplicationContext;
import com.facebook.react.bridge.ReactContext;
import com.facebook.react.bridge.ReadableArray;
import com.facebook.react.bridge.WritableArray;
import com.facebook.react.bridge.WritableNativeMap;
import org.jitsi.meet.sdk.ReactContextUtils;
import java.util.Collections;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import java.util.UUID;
import java.util.concurrent.Callable;
import java.util.concurrent.Future;
import java.util.concurrent.FutureTask;
/**
* Represents the entry point into the invite feature of Jitsi Meet and is the
* Java counterpart of the JavaScript {@code InviteButton}.
*/
public class InviteController {
private AddPeopleController addPeopleController;
/**
* Whether adding/inviting people by name (as opposed to phone number) is
* enabled.
*/
private Boolean addPeopleEnabled;
/**
* Whether adding/inviting people by phone number (as opposed to name) is
* enabled.
*/
private Boolean dialOutEnabled;
private final String externalAPIScope;
private InviteControllerListener listener;
public InviteController(String externalAPIScope) {
this.externalAPIScope = externalAPIScope;
}
void beginAddPeople(ReactApplicationContext reactContext) {
InviteControllerListener listener = getListener();
if (listener != null) {
// XXX For the sake of simplicity and in order to reduce the risk of
// memory leaks, allow a single AddPeopleController at a time.
AddPeopleController addPeopleController = this.addPeopleController;
if (addPeopleController != null) {
return;
}
// Initialize a new AddPeopleController to represent the click/tap
// on the InviteButton and notify the InviteControllerListener
// about the event.
addPeopleController = new AddPeopleController(this, reactContext);
boolean success = false;
this.addPeopleController = addPeopleController;
try {
listener.beginAddPeople(addPeopleController);
success = true;
} finally {
if (!success) {
endAddPeople(addPeopleController);
}
}
}
}
void endAddPeople(AddPeopleController addPeopleController) {
if (this.addPeopleController == addPeopleController) {
this.addPeopleController = null;
}
}
public InviteControllerListener getListener() {
return listener;
}
/**
* Sends JavaScript event to submit invitations to the given item ids
*
* @param invitees a WritableArray of WritableNativeMaps representing
* selected items. Each map representing a selected item should match the
* data passed back in the return from a query.
*/
boolean invite(
AddPeopleController addPeopleController,
WritableArray invitees) {
return
invite(
addPeopleController.getUuid(),
addPeopleController.getReactApplicationContext(),
invitees);
}
public Future<List<Map<String, Object>>> invite(
final List<Map<String, Object>> invitees) {
final boolean inviteBegan
= invite(
UUID.randomUUID().toString(),
/* reactContext */ null,
Arguments.makeNativeArray(invitees));
FutureTask futureTask
= new FutureTask(new Callable() {
@Override
public List<Map<String, Object>> call() {
if (inviteBegan) {
// TODO Complete the returned Future when the invite
// settles.
return Collections.emptyList();
} else {
// The invite failed to even begin so report that all
// invitees failed.
return invitees;
}
}
});
// If the invite failed to even begin, complete the returned Future
// already and the Future implementation will report that all invitees
// failed.
if (!inviteBegan) {
futureTask.run();
}
return futureTask;
}
private boolean invite(
String addPeopleControllerScope,
ReactContext reactContext,
WritableArray invitees) {
WritableNativeMap data = new WritableNativeMap();
data.putString("addPeopleControllerScope", addPeopleControllerScope);
data.putString("externalAPIScope", externalAPIScope);
data.putArray("invitees", invitees);
return
ReactContextUtils.emitEvent(
reactContext,
"org.jitsi.meet:features/invite#invite",
data);
}
void inviteSettled(
String addPeopleControllerScope,
ReadableArray failedInvitees) {
AddPeopleController addPeopleController = this.addPeopleController;
if (addPeopleController != null
&& addPeopleController.getUuid().equals(
addPeopleControllerScope)) {
try {
addPeopleController.inviteSettled(failedInvitees);
} finally {
if (failedInvitees.size() == 0) {
endAddPeople(addPeopleController);
}
}
}
}
public boolean isAddPeopleEnabled() {
Boolean b = this.addPeopleEnabled;
return
(b == null || b.booleanValue()) ? (getListener() != null) : false;
}
public boolean isDialOutEnabled() {
Boolean b = this.dialOutEnabled;
return
(b == null || b.booleanValue()) ? (getListener() != null) : false;
}
/**
* Starts a query for users to invite to the conference. Results will be
* returned through the {@link AddPeopleControllerListener#onReceivedResults(AddPeopleController, List, String)}
* method.
*
* @param query {@code String} to use for the query
*/
void performQuery(AddPeopleController addPeopleController, String query) {
WritableNativeMap params = new WritableNativeMap();
params.putString("addPeopleControllerScope", addPeopleController.getUuid());
params.putString("externalAPIScope", externalAPIScope);
params.putString("query", query);
ReactContextUtils.emitEvent(
addPeopleController.getReactApplicationContext(),
"org.jitsi.meet:features/invite#performQuery",
params);
}
void receivedResultsForQuery(
String addPeopleControllerScope,
String query,
ReadableArray results) {
AddPeopleController addPeopleController = this.addPeopleController;
if (addPeopleController != null
&& addPeopleController.getUuid().equals(
addPeopleControllerScope)) {
addPeopleController.receivedResultsForQuery(results, query);
}
}
/**
* Sets whether the ability to add users to the call is enabled. If this is
* enabled, an add user button will appear on the {@link JitsiMeetView}. If
* enabled, and the user taps the add user button,
* {@link InviteControllerListener#beginAddPeople(AddPeopleController)}
* will be called.
*
* @param addPeopleEnabled {@code true} to enable the add people button;
* otherwise, {@code false}
*/
public void setAddPeopleEnabled(boolean addPeopleEnabled) {
this.addPeopleEnabled = Boolean.valueOf(addPeopleEnabled);
}
/**
* Sets whether the ability to add phone numbers to the call is enabled.
* Must be enabled along with {@link #setAddPeopleEnabled(boolean)} to be
* effective.
*
* @param dialOutEnabled {@code true} to enable the ability to add phone
* numbers to the call; otherwise, {@code false}
*/
public void setDialOutEnabled(boolean dialOutEnabled) {
this.dialOutEnabled = Boolean.valueOf(dialOutEnabled);
}
public void setListener(InviteControllerListener listener) {
this.listener = listener;
}
}

View File

@@ -0,0 +1,29 @@
/*
* Copyright @ 2017-present Atlassian Pty Ltd
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jitsi.meet.sdk.invite;
public interface InviteControllerListener {
/**
* Called when the add user button is tapped.
*
* @param addPeopleController {@code AddPeopleController} scoped
* for this user invite flow. The {@code AddPeopleController} is used
* to start user queries and accepts an {@code AddPeopleControllerListener}
* for receiving user query responses.
*/
void beginAddPeople(AddPeopleController addPeopleController);
}

View File

@@ -0,0 +1,165 @@
/*
* Copyright @ 2017-present Atlassian Pty Ltd
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jitsi.meet.sdk.invite;
import android.util.Log;
import com.facebook.react.bridge.ReactApplicationContext;
import com.facebook.react.bridge.ReactContextBaseJavaModule;
import com.facebook.react.bridge.ReactMethod;
import com.facebook.react.bridge.ReadableArray;
import com.facebook.react.bridge.UiThreadUtil;
import org.jitsi.meet.sdk.JitsiMeetView;
/**
* Implements the react-native module of the feature invite.
*/
public class InviteModule extends ReactContextBaseJavaModule {
public InviteModule(ReactApplicationContext reactContext) {
super(reactContext);
}
/**
* Signals that a click/tap has been performed on {@code InviteButton} and
* that the execution flow for adding/inviting people to the current
* conference/meeting is to begin
*
* @param externalAPIScope the unique identifier of the
* {@code JitsiMeetView} whose {@code InviteButton} was clicked/tapped.
*/
@ReactMethod
public void beginAddPeople(final String externalAPIScope) {
// Make sure InviteControllerListener (like all other listeners of the
// SDK) is invoked on the UI thread. It was requested by SDK consumers.
if (!UiThreadUtil.isOnUiThread()) {
UiThreadUtil.runOnUiThread(new Runnable() {
@Override
public void run() {
beginAddPeople(externalAPIScope);
}
});
return;
}
InviteController inviteController
= findInviteControllerByExternalAPIScope(externalAPIScope);
if (inviteController != null) {
inviteController.beginAddPeople(getReactApplicationContext());
}
}
private InviteController findInviteControllerByExternalAPIScope(
String externalAPIScope) {
JitsiMeetView view
= JitsiMeetView.findViewByExternalAPIScope(externalAPIScope);
return view == null ? null : view.getInviteController();
}
@Override
public String getName() {
return "Invite";
}
/**
* Callback for invitation failures
*
* @param failedInvitees the items for which the invitation failed
* @param addPeopleControllerScope a string that represents a connection to a specific AddPeopleController
*/
@ReactMethod
public void inviteSettled(
final String externalAPIScope,
final String addPeopleControllerScope,
final ReadableArray failedInvitees) {
// Make sure AddPeopleControllerListener (like all other listeners of
// the SDK) is invoked on the UI thread. It was requested by SDK
// consumers.
if (!UiThreadUtil.isOnUiThread()) {
UiThreadUtil.runOnUiThread(new Runnable() {
@Override
public void run() {
inviteSettled(
externalAPIScope,
addPeopleControllerScope,
failedInvitees);
}
});
return;
}
InviteController inviteController
= findInviteControllerByExternalAPIScope(externalAPIScope);
if (inviteController == null) {
Log.w(
"InviteModule",
"Invite settled, but failed to find active controller to notify");
} else {
inviteController.inviteSettled(
addPeopleControllerScope,
failedInvitees);
}
}
/**
* Callback for results received from the JavaScript invite search call
*
* @param results the results in a ReadableArray of ReadableMap objects
* @param query the query associated with the search
* @param addPeopleControllerScope a string that represents a connection to a specific AddPeopleController
*/
@ReactMethod
public void receivedResults(
final String externalAPIScope,
final String addPeopleControllerScope,
final String query,
final ReadableArray results) {
// Make sure AddPeopleControllerListener (like all other listeners of
// the SDK) is invoked on the UI thread. It was requested by SDK
// consumers.
if (!UiThreadUtil.isOnUiThread()) {
UiThreadUtil.runOnUiThread(new Runnable() {
@Override
public void run() {
receivedResults(
externalAPIScope,
addPeopleControllerScope,
query,
results);
}
});
return;
}
InviteController inviteController
= findInviteControllerByExternalAPIScope(externalAPIScope);
if (inviteController == null) {
Log.w(
"InviteModule",
"Received results, but failed to find active controller to send results back");
} else {
inviteController.receivedResultsForQuery(
addPeopleControllerScope,
query,
results);
}
}
}

View File

@@ -0,0 +1,238 @@
/*
* Copyright @ 2018-present Atlassian Pty Ltd
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jitsi.meet.sdk.net;
import java.net.InetAddress;
import java.net.UnknownHostException;
/**
* Constructs IPv6 addresses for IPv4 addresses in the NAT64 environment.
*
* NAT64 translates IPv4 to IPv6 addresses by adding "well known" prefix and
* suffix configured by the administrator. Those are figured out by discovering
* both IPv6 and IPv4 addresses of a host and then trying to find a place where
* the IPv4 address fits into the format described here:
* https://tools.ietf.org/html/rfc6052#section-2.2
*/
public class NAT64AddrInfo {
/**
* Coverts bytes array to upper case HEX string.
*
* @param bytes an array of bytes to be converted
* @return ex. "010AFF" for an array of {1, 10, 255}.
*/
static String bytesToHexString(byte[] bytes) {
StringBuilder hexStr = new StringBuilder();
for (byte b : bytes) {
hexStr.append(String.format("%02X", b));
}
return hexStr.toString();
}
/**
* Tries to discover the NAT64 prefix/suffix based on the IPv4 and IPv6
* addresses resolved for given {@code host}.
*
* @param host the host for which the code will try to discover IPv4 and
* IPv6 addresses which then will be used to figure out the NAT64 prefix.
* @return {@link NAT64AddrInfo} instance if the NAT64 prefix/suffix was
* successfully discovered or {@code null} if it failed for any reason.
* @throws UnknownHostException thrown by {@link InetAddress#getAllByName}.
*/
public static NAT64AddrInfo discover(String host)
throws UnknownHostException {
InetAddress ipv4 = null;
InetAddress ipv6 = null;
for(InetAddress addr : InetAddress.getAllByName(host)) {
byte[] bytes = addr.getAddress();
if (bytes.length == 4) {
ipv4 = addr;
} else if (bytes.length == 16) {
ipv6 = addr;
}
}
if (ipv4 != null && ipv6 != null) {
return figureOutNAT64AddrInfo(ipv4.getAddress(), ipv6.getAddress());
}
return null;
}
/**
* Based on IPv4 and IPv6 addresses of the same host, the method will make
* an attempt to figure out what are the NAT64 prefix and suffix.
*
* @param ipv4AddrBytes the IPv4 address of the same host in NAT64 network,
* as returned by {@link InetAddress#getAddress()}.
* @param ipv6AddrBytes the IPv6 address of the same host in NAT64 network,
* as returned by {@link InetAddress#getAddress()}.
* @return {@link NAT64AddrInfo} instance which contains the prefix/suffix
* of the current NAT64 network or {@code null} if the prefix could not be
* found.
*/
static NAT64AddrInfo figureOutNAT64AddrInfo(
byte[] ipv4AddrBytes,
byte[] ipv6AddrBytes) {
String ipv6Str = bytesToHexString(ipv6AddrBytes);
String ipv4Str = bytesToHexString(ipv4AddrBytes);
// NAT64 address format:
// +--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
// |PL| 0-------------32--40--48--56--64--72--80--88--96--104---------|
// +--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
// |32| prefix |v4(32) | u | suffix |
// +--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
// |40| prefix |v4(24) | u |(8)| suffix |
// +--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
// |48| prefix |v4(16) | u | (16) | suffix |
// +--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
// |56| prefix |(8)| u | v4(24) | suffix |
// +--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
// |64| prefix | u | v4(32) | suffix |
// +--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
// |96| prefix | v4(32) |
// +--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
int prefixLength = 96;
int suffixLength = 0;
String prefix = null;
String suffix = null;
if (ipv4Str.equalsIgnoreCase(ipv6Str.substring(prefixLength / 4))) {
prefix = ipv6Str.substring(0, prefixLength / 4);
} else {
// Cut out the 'u' octet
ipv6Str = ipv6Str.substring(0, 16) + ipv6Str.substring(18);
for (prefixLength = 64, suffixLength = 6; prefixLength >= 32; ) {
if (ipv4Str.equalsIgnoreCase(
ipv6Str.substring(
prefixLength / 4, prefixLength / 4 + 8))) {
prefix = ipv6Str.substring(0, prefixLength / 4);
suffix = ipv6Str.substring(ipv6Str.length() - suffixLength);
break;
}
prefixLength -= 8;
suffixLength += 2;
}
}
return prefix != null ? new NAT64AddrInfo(prefix, suffix) : null;
}
/**
* An overload for {@link #hexStringToIPv6String(StringBuilder)}.
*
* @param hexStr a hex representation of IPv6 address bytes.
* @return an IPv6 address string.
*/
static String hexStringToIPv6String(String hexStr) {
return hexStringToIPv6String(new StringBuilder(hexStr));
}
/**
* Converts from HEX representation of IPv6 address bytes into IPv6 address
* string which includes the ':' signs.
*
* @param str a hex representation of IPv6 address bytes.
* @return eg. FE80:CD00:0000:0CDA:1357:0000:212F:749C
*/
static String hexStringToIPv6String(StringBuilder str) {
for (int i = 32 - 4; i > 0; i -= 4) {
str.insert(i, ":");
}
return str.toString().toUpperCase();
}
/**
* Parses an IPv4 address string and returns it's byte array representation.
*
* @param ipv4Address eg. '192.168.3.23'
* @return byte representation of given IPv4 address string.
* @throws IllegalArgumentException if the address is not in valid format.
*/
static byte[] ipv4AddressStringToBytes(String ipv4Address) {
InetAddress address;
try {
address = InetAddress.getByName(ipv4Address);
} catch (UnknownHostException e) {
throw new IllegalArgumentException(
"Invalid IP address: " + ipv4Address, e);
}
byte[] bytes = address.getAddress();
if (bytes.length != 4) {
throw new IllegalArgumentException(
"Not an IPv4 address: " + ipv4Address);
}
return bytes;
}
/**
* The NAT64 prefix added to construct IPv6 from an IPv4 address.
*/
private final String prefix;
/**
* The NAT64 suffix (if any) used to construct IPv6 from an IPv4 address.
*/
private final String suffix;
/**
* Creates new instance of {@link NAT64AddrInfo}.
*
* @param prefix the NAT64 prefix.
* @param suffix the NAT64 suffix.
*/
private NAT64AddrInfo(String prefix, String suffix) {
this.prefix = prefix;
this.suffix = suffix;
}
/**
* Based on the NAT64 prefix and suffix will create an IPv6 representation
* of the given IPv4 address.
*
* @param ipv4Address eg. '192.34.2.3'
* @return IPv6 address string eg. FE80:CD00:0000:0CDA:1357:0000:212F:749C
* @throws IllegalArgumentException if given string is not a valid IPv4
* address.
*/
public String getIPv6Address(String ipv4Address) {
byte[] ipv4AddressBytes = ipv4AddressStringToBytes(ipv4Address);
StringBuilder newIPv6Str = new StringBuilder();
newIPv6Str.append(prefix);
newIPv6Str.append(bytesToHexString(ipv4AddressBytes));
if (suffix != null) {
// Insert the 'u' octet.
newIPv6Str.insert(16, "00");
newIPv6Str.append(suffix);
}
return hexStringToIPv6String(newIPv6Str);
}
}

View File

@@ -0,0 +1,122 @@
/*
* Copyright @ 2018-present Atlassian Pty Ltd
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jitsi.meet.sdk.net;
import android.util.Log;
import com.facebook.react.bridge.Promise;
import com.facebook.react.bridge.ReactApplicationContext;
import com.facebook.react.bridge.ReactContextBaseJavaModule;
import com.facebook.react.bridge.ReactMethod;
import java.net.UnknownHostException;
/**
* This module exposes the functionality of creating an IPv6 representation
* of IPv4 addresses in NAT64 environment.
*
* See[1] and [2] for more info on what NAT64 is.
* [1]: https://tools.ietf.org/html/rfc6146
* [2]: https://tools.ietf.org/html/rfc6052
*/
public class NAT64AddrInfoModule extends ReactContextBaseJavaModule {
/**
* The host for which the module wil try to resolve both IPv4 and IPv6
* addresses in order to figure out the NAT64 prefix.
*/
private final static String HOST = "nat64.jitsi.net";
/**
* How long is the {@link NAT64AddrInfo} instance valid.
*/
private final static long INFO_LIFETIME = 60 * 1000;
/**
* The name of this module.
*/
private final static String MODULE_NAME = "NAT64AddrInfo";
/**
* The {@code Log} tag {@code NAT64AddrInfoModule} is to log messages with.
*/
private final static String TAG = MODULE_NAME;
/**
* The {@link NAT64AddrInfo} instance which holds NAT64 prefix/suffix.
*/
private NAT64AddrInfo info;
/**
* When {@link #info} was created.
*/
private long infoTimestamp;
/**
* Creates new {@link NAT64AddrInfoModule}.
*
* @param reactContext the react context to be used by the new module
* instance.
*/
public NAT64AddrInfoModule(ReactApplicationContext reactContext) {
super(reactContext);
}
/**
* Tries to obtain IPv6 address for given IPv4 address in NAT64 environment.
*
* @param ipv4Address IPv4 address string.
* @param promise a {@link Promise} which will be resolved either with IPv6
* address for given IPv4 address or with {@code null} if no
* {@link NAT64AddrInfo} was resolved for the current network. Will be
* rejected if given {@code ipv4Address} is not a valid IPv4 address.
*/
@ReactMethod
public void getIPv6Address(String ipv4Address, final Promise promise) {
// Reset if cached for too long.
if (System.currentTimeMillis() - infoTimestamp > INFO_LIFETIME) {
info = null;
}
if (info == null) {
String host = HOST;
try {
info = NAT64AddrInfo.discover(host);
} catch (UnknownHostException e) {
Log.e(TAG, "NAT64AddrInfo.discover: " + host, e);
}
infoTimestamp = System.currentTimeMillis();
}
String result;
try {
result = info == null ? null : info.getIPv6Address(ipv4Address);
} catch (IllegalArgumentException exc) {
Log.e(TAG, "Failed to get IPv6 address for: " + ipv4Address, exc);
// We don't want to reject. It's not a big deal if there's no IPv6
// address resolved.
result = null;
}
promise.resolve(result);
}
@Override
public String getName() {
return MODULE_NAME;
}
}

View File

@@ -0,0 +1,150 @@
/*
* Copyright @ 2017-present Atlassian Pty Ltd
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jitsi.meet.sdk.net;
import org.junit.Test;
import java.math.BigInteger;
import java.net.UnknownHostException;
import static org.junit.Assert.*;
/**
* Tests for {@link NAT64AddrInfo} class.
*/
public class NAT64AddrInfoTest {
/**
* Test case for the 96 prefix length.
*/
@Test
public void test96Prefix() {
testPrefixSuffix(
"260777000000000400000000", "", "203.0.113.1", "23.17.23.3");
}
/**
* Test case for the 64 prefix length.
*/
@Test
public void test64Prefix() {
String prefix = "1FF2A227B3AAF3D2";
String suffix = "BB87C8";
testPrefixSuffix(prefix, suffix, "48.46.87.34", "23.87.145.4");
}
/**
* Test case for the 56 prefix length.
*/
@Test
public void test56Prefix() {
String prefix = "1FF2A227B3AAF3";
String suffix = "A2BB87C8";
testPrefixSuffix(prefix, suffix, "34.72.234.255", "1.235.3.65");
}
/**
* Test case for the 48 prefix length.
*/
@Test
public void test48Prefix() {
String prefix = "1FF2A227B3AA";
String suffix = "72A2BB87C8";
testPrefixSuffix(prefix, suffix, "97.54.3.23", "77.49.0.33");
}
/**
* Test case for the 40 prefix length.
*/
@Test
public void test40Prefix() {
String prefix = "1FF2A227B3";
String suffix = "D972A2BB87C8";
testPrefixSuffix(prefix, suffix, "10.23.56.121", "97.65.32.21");
}
/**
* Test case for the 32 prefix length.
*/
@Test
public void test32Prefix()
throws UnknownHostException {
String prefix = "1FF2A227";
String suffix = "20D972A2BB87C8";
testPrefixSuffix(prefix, suffix, "162.63.65.189", "135.222.84.206");
}
private static String buildIPv6Addr(
String prefix, String suffix, String ipv4Hex) {
String ipv6Str = prefix + ipv4Hex + suffix;
if (suffix.length() > 0) {
ipv6Str = new StringBuilder(ipv6Str).insert(16, "00").toString();
}
return ipv6Str;
}
private void testPrefixSuffix(
String prefix, String suffix, String ipv4, String otherIPv4) {
byte[] ipv4Bytes = NAT64AddrInfo.ipv4AddressStringToBytes(ipv4);
String ipv4String = NAT64AddrInfo.bytesToHexString(ipv4Bytes);
String ipv6Str = buildIPv6Addr(prefix, suffix, ipv4String);
BigInteger ipv6Address = new BigInteger(ipv6Str, 16);
NAT64AddrInfo nat64AddrInfo
= NAT64AddrInfo.figureOutNAT64AddrInfo(
ipv4Bytes, ipv6Address.toByteArray());
assertNotNull("Failed to figure out NAT64 info", nat64AddrInfo);
String newIPv6 = nat64AddrInfo.getIPv6Address(ipv4);
assertEquals(
NAT64AddrInfo.hexStringToIPv6String(ipv6Address.toString(16)),
newIPv6);
byte[] ipv4Addr2 = NAT64AddrInfo.ipv4AddressStringToBytes(otherIPv4);
String ipv4Addr2Hex = NAT64AddrInfo.bytesToHexString(ipv4Addr2);
newIPv6 = nat64AddrInfo.getIPv6Address(otherIPv4);
assertEquals(
NAT64AddrInfo.hexStringToIPv6String(
buildIPv6Addr(prefix, suffix, ipv4Addr2Hex)),
newIPv6);
}
@Test
public void testInvalidIPv4Format() {
testInvalidIPv4Format("256.1.2.3");
testInvalidIPv4Format("FE80:CD00:0000:0CDA:1357:0000:212F:749C");
}
private void testInvalidIPv4Format(String ipv4Str) {
try {
NAT64AddrInfo.ipv4AddressStringToBytes(ipv4Str);
fail("Did not throw IllegalArgumentException");
} catch (IllegalArgumentException exc) {
/* OK */
}
}
}

View File

@@ -9,7 +9,13 @@ include ':react-native-immersive'
project(':react-native-immersive').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-immersive/android')
include ':react-native-keep-awake'
project(':react-native-keep-awake').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-keep-awake/android')
include ':react-native-locale-detector'
project(':react-native-locale-detector').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-locale-detector/android')
include ':react-native-sound'
project(':react-native-sound').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-sound/android')
include ':react-native-vector-icons'
project(':react-native-vector-icons').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-vector-icons/android')
include ':react-native-webrtc'
project(':react-native-webrtc').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-webrtc/android')
include ':react-native-calendar-events'
project(':react-native-calendar-events').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-calendar-events/android')

8
app.js
View File

@@ -8,20 +8,13 @@ import './react/features/base/react/prop-types-polyfill.js';
import 'jquery';
import 'jquery-contextmenu';
import 'jquery-ui';
import 'jQuery-Impromptu';
import 'autosize';
import 'aui';
import 'aui-experimental';
import 'aui-css';
import 'aui-experimental-css';
import conference from './conference';
import API from './modules/API';
import keyboardshortcut from './modules/keyboardshortcut/keyboardshortcut';
import remoteControl from './modules/remotecontrol/RemoteControl';
import settings from './modules/settings/Settings';
import translation from './modules/translation/translation';
import UI from './modules/UI/UI';
@@ -47,7 +40,6 @@ window.APP = {
keyboardshortcut,
remoteControl,
settings,
translation,
UI
};

File diff suppressed because it is too large Load Diff

117
config.js
View File

@@ -57,6 +57,9 @@ var config = {
// P2P test mode disables automatic switching to P2P when there are 2
// participants in the conference.
p2pTestMode: false
// Enables the test specific features consumed by jitsi-meet-torture
// testMode: false
},
// Disables ICE/UDP by filtering out local and remote UDP candidates in
@@ -94,7 +97,7 @@ var config = {
// w3c spec-compliant video constraints to use for video capture. Currently
// used by browsers that return true from lib-jitsi-meet's
// RTCBrowserType#usesNewGumFlow. The constraints are independency from
// util#browser#usesNewGumFlow. The constraints are independency from
// this config's resolution value. Defaults to requesting an ideal aspect
// ratio of 16:9 with an ideal resolution of 1080p.
// constraints: {
@@ -150,22 +153,14 @@ var config = {
// Required version of Chrome extension
desktopSharingChromeMinExtVersion: '0.1',
// The ID of the jidesha extension for Firefox. If null, we assume that no
// extension is required.
desktopSharingFirefoxExtId: null,
// Whether desktop sharing should be disabled on Firefox.
desktopSharingFirefoxDisabled: false,
// The maximum version of Firefox which requires a jidesha extension.
// Example: if set to 41, we will require the extension for Firefox versions
// up to and including 41. On Firefox 42 and higher, we will run without the
// extension.
// If set to -1, an extension will be required for all versions of Firefox.
desktopSharingFirefoxMaxVersionExtRequired: 51,
// The URL to the Firefox extension for desktop sharing.
desktopSharingFirefoxExtensionURL: null,
// Optional desktop sharing frame rate options. Default value: min:5, max:5.
// desktopSharingFrameRate: {
// min: 5,
// max: 5
// },
// Try to start calls with screen-sharing instead of camera video.
// startScreenSharing: false,
@@ -186,6 +181,23 @@ var config = {
// Disables or enables RTX (RFC 4588) (defaults to false).
// disableRtx: false,
// Disables or enables TCC (the default is in Jicofo and set to true)
// (draft-holmer-rmcat-transport-wide-cc-extensions-01). This setting
// affects congestion control, it practically enables send-side bandwidth
// estimations.
// enableTcc: true,
// Disables or enables REMB (the default is in Jicofo and set to false)
// (draft-alvestrand-rmcat-remb-03). This setting affects congestion
// control, it practically enables recv-side bandwidth estimations. When
// both TCC and REMB are enabled, TCC takes precedence. When both are
// disabled, then bandwidth estimations are disabled.
// enableRemb: false,
// Defines the minimum number of participants to start a call (the default
// is set in Jicofo and set to 2).
// minParticipants: 2,
// Use XEP-0215 to fetch STUN and TURN servers.
// useStunTurn: true,
@@ -219,8 +231,6 @@ var config = {
// Disable hiding of remote thumbnails when in a 1-on-1 conference call.
// disable1On1Mode: false,
// The minumum value a video's height (or width, whichever is smaller) needs
// The minimum value a video's height (or width, whichever is smaller) needs
// to be in order to be considered high-definition.
minHDHeight: 540,
@@ -241,8 +251,11 @@ var config = {
// Stats
//
// Whether to enable stats collection or not.
// disableStats: false,
// Whether to enable stats collection or not in the TraceablePeerConnection.
// This can be useful for debugging purposes (post-processing/analysis of
// the webrtc stats) as it is done in the jitsi-meet-torture bandwidth
// estimation tests.
// gatherStats: false,
// To enable sending statistics to callstats.io you must provide the
// Application ID and Secret.
@@ -288,6 +301,14 @@ var config = {
{ urls: 'stun:stun2.l.google.com:19302' }
],
// Sets the ICE transport policy for the p2p connection. At the time
// of this writing the list of possible values are 'all' and 'relay',
// but that is subject to change in the future. The enum is defined in
// the WebRTC standard:
// https://www.w3.org/TR/webrtc/#rtcicetransportpolicy-enum.
// If not set, the effective value is 'all'.
// iceTransportPolicy: 'all',
// If set to true, it will prefer to use H.264 for P2P calls (if H.264
// is supported).
preferH264: true
@@ -301,16 +322,72 @@ var config = {
// backToP2PDelay: 5
},
// A list of scripts to load as lib-jitsi-meet "analytics handlers".
// analyticsScriptUrls: [
// "libs/analytics-ga.js", // google-analytics
// "https://example.com/my-custom-analytics.js"
// ],
// The Google Analytics Tracking ID
// googleAnalyticsTrackingId = 'your-tracking-id-here-UA-123456-1',
// Information about the jitsi-meet instance we are connecting to, including
// the user region as seen by the server.
//
deploymentInfo: {
// shard: "shard1",
// region: "europe",
// userRegion: "asia"
}
// List of undocumented settings used in jitsi-meet
/**
alwaysVisibleToolbar
autoRecord
autoRecordToken
debug
debugAudioLevels
deploymentInfo
dialInConfCodeUrl
dialInNumbersUrl
dialOutAuthUrl
dialOutCodesUrl
disableRemoteControl
displayJids
enableLocalVideoFlip
etherpad_base
externalConnectUrl
firefox_fake_device
googleApiApplicationClientID
iAmRecorder
iAmSipGateway
peopleSearchQueryTypes
peopleSearchUrl
requireDisplayName
tokenAuthUrl
*/
// List of undocumented settings used in lib-jitsi-meet
/**
_peerConnStatusOutOfLastNTimeout
_peerConnStatusRtcMuteTimeout
abTesting
avgRtpStatsN
callStatsConfIDNamespace
callStatsCustomScriptUrl
desktopSharingSources
disableAEC
disableAGC
disableAP
disableHPF
disableNS
enableLipSync
enableTalkWhileMuted
forceJVB121Ratio
hiddenDomain
ignoreStartMuted
nick
startBitrate
*/
};
/* eslint-enable no-unused-vars, no-var */

View File

@@ -94,12 +94,20 @@ function connect(id, password, roomName) {
JitsiConnectionEvents.CONNECTION_FAILED,
connectionFailedHandler);
/* eslint-disable max-params */
/**
*
*/
function connectionFailedHandler(error, message, credentials) {
function connectionFailedHandler(error, message, credentials, details) {
/* eslint-enable max-params */
APP.store.dispatch(
connectionFailed(connection, error, message, credentials));
connectionFailed(
connection, {
credentials,
details,
message,
name: error
}));
if (isFatalJitsiConnectionError(error)) {
connection.removeEventListener(

View File

@@ -16,14 +16,17 @@ import parseURLParams from '../react/features/base/config/parseURLParams';
*/
if (typeof createConnectionExternally === 'function') {
// URL params have higher proirity than config params.
// URL params have higher priority than config params.
let url
= parseURLParams(window.location, true, 'hash')[
'config.externalConnectUrl']
|| config.externalConnectUrl;
const isRecorder
= parseURLParams(window.location, true, 'hash')['config.iAmRecorder'];
let roomName;
if (url && (roomName = getRoomName())) {
if (url && (roomName = getRoomName()) && !isRecorder) {
url += `?room=${roomName}`;
const token = parseURLParams(window.location, true, 'search').jwt;

View File

@@ -2,42 +2,6 @@
* Project animations
**/
/**
* Slide in animation for extended toolbar.
*/
@include keyframes(slideInX) {
0% { transform: translateX(-100%); }
100% { transform: translateX(0%); }
}
@include keyframes(slideOutX) {
0% { transform: translateX(0%); }
100% { transform: translateX(-100%); }
}
@include keyframes(slideInExtX) {
0% { transform: translateX(-500%); }
100% { transform: translateX(0%); }
}
@include keyframes(slideOutExtX) {
0% { transform: translateX(0%); }
100% { transform: translateX(-500%); }
}
/**
* Slide in / out animation for main toolbar.
*/
@include keyframes(slideInY) {
100% { transform: translateY(0%); }
}
@include keyframes(slideOutY) {
0% { transform: translateY(0%); }
100% { transform: translateY(-100%); }
}
/**
* Slide in animation for extended toolbar (inner) panel.
*/
@@ -53,17 +17,3 @@
from { left: 0; }
to { left: -$sidebarWidth; }
}
/**
* Slide in animation for extended toolbar container
**/
@include keyframes(slideOutExtContainer) {
from { width: $sidebarWidth; }
to { width: 0; }
}
@include keyframes(slideInExtContainer) {
from { width: 0; }
to { width: $sidebarWidth; }
}

229
css/_aui_reset.scss Normal file
View File

@@ -0,0 +1,229 @@
/* Fonts and line heights */
/**
* RESET
*/
html,
body,
p,
div,
h1,
h2,
h3,
h4,
h5,
h6,
img,
pre,
form,
fieldset {
margin: 0;
padding: 0;
}
ul,
ol,
dl {
margin: 0;
}
img,
fieldset {
border: 0;
}
@-moz-document url-prefix() {
img {
font-size: 0;
}
img:-moz-broken {
font-size: inherit;
}
}
/* https://github.com/necolas/normalize.css */
/* Customised to remove styles for unsupported browsers */
details,
main,
summary {
display: block;
}
audio,
canvas,
progress,
video {
display: inline-block;
vertical-align: baseline;
}
audio:not([controls]) {
display: none;
height: 0;
}
[hidden],
template {
display: none;
}
input[type="button"],
input[type="submit"],
input[type="reset"] {
-webkit-appearance: button;
}
/**
* TYPOGRAPHY - 14px base font size, agnostic font stack
*/
body {
color: #333;
font-family: Arial, sans-serif;
font-size: 14px;
line-height: 1.42857142857143;
}
/* International Font Stacks*/
[lang|=en] {
font-family: Arial, sans-serif;
}
[lang|=ja] {
font-family: "Hiragino Kaku Gothic Pro", "ヒラギノ角ゴ Pro W3", "メイリオ", Meiryo, " Pゴシック", Verdana, Arial, sans-serif;
}
/* Default margins */
p,
ul,
ol,
dl,
h1,
h2,
h3,
h4,
h5,
h6,
blockquote,
pre {
margin: 10px 0 0 0;
}
/* No top margin to interfere with box padding */
p:first-child,
ul:first-child,
ol:first-child,
dl:first-child,
h1:first-child,
h2:first-child,
h3:first-child,
h4:first-child,
h5:first-child,
h6:first-child,
blockquote:first-child,
pre:first-child {
margin-top: 0;
}
/* Headings: desired line height in px / font size = unitless line height */
h1 {
color: #333;
font-size: 32px;
font-weight: normal;
line-height: 1.25;
text-transform: none;
margin: 30px 0 0 0;
}
h2 {
color: #333;
font-size: 24px;
font-weight: normal;
line-height: 1.25;
text-transform: none;
margin: 30px 0 0 0;
}
h3 {
color: #333;
font-size: 20px;
font-weight: normal;
line-height: 1.5;
text-transform: none;
margin: 30px 0 0 0;
}
h4 {
font-size: 16px;
font-weight: bold;
line-height: 1.25;
text-transform: none;
margin: 20px 0 0 0;
}
h5 {
color: #333;
font-size: 14px;
font-weight: bold;
line-height: 1.42857143;
text-transform: none;
margin: 20px 0 0 0;
}
h6 {
color: #707070;
font-size: 12px;
font-weight: bold;
line-height: 1.66666667;
text-transform: uppercase;
margin: 20px 0 0 0;
}
h1:first-child,
h2:first-child,
h3:first-child,
h4:first-child,
h5:first-child,
h6:first-child {
margin-top: 0;
}
/* Nice styles for using subheadings */
h1 + h2,
h2 + h3,
h3 + h4,
h4 + h5,
h5 + h6 {
margin-top: 10px;
}
/* Other typographical elements */
small {
color: #707070;
font-size: 12px;
line-height: 1.33333333333333;
}
code,
kbd {
font-family: monospace;
}
var,
address,
dfn,
cite {
font-style: italic;
}
cite:before {
content: "\2014 \2009";
}
blockquote {
border-left: 1px solid #ccc;
color: #707070;
margin-left: 19px;
padding: 10px 20px;
}
blockquote > cite {
display: block;
margin-top: 10px;
}
q {
color: #707070;
}
q:before {
content: open-quote;
}
q:after {
content: close-quote;
}
abbr {
border-bottom: 1px #707070 dotted;
cursor: help;
}
a {
color: #3572b0;
text-decoration: none;
}
a:focus,
a:hover,
a:active {
text-decoration: underline;
}

View File

@@ -3,11 +3,17 @@
* none is applied. Other browsers already support selecting within inputs while
* user-select is none. As such, disallow user-select except on inputs.
*/
*:not(input) {
* {
-webkit-user-select: none;
user-select: none;
}
input,
textarea {
-webkit-user-select: text;
user-select: text;
}
body {
margin: 0px;
width: 100%;
@@ -22,6 +28,16 @@ body {
}
}
/**
* AtlasKitThemeProvider sets a background color on an app-wrapping div, thereby
* preventing transparency in filmstrip-only mode. The selector chosen to
* override this behavior is specific to where the AtlasKitThemeProvider might
* be placed within the app hierarchy.
*/
.filmstrip-only #react > .ckAJgx {
background: transparent;
}
p {
margin: 0;
}
@@ -50,7 +66,6 @@ input[type="reset"], input[type="submit"] {
}
textarea {
overflow: hidden;
word-wrap: break-word;
resize: none;
line-height: 1.5em;
@@ -123,6 +138,9 @@ form {
* Dialogs fade
*/
.aui-blanket {
background: #000;
transition: opacity 0.2s, visibility 0.2s;
transition-delay: 0.1s;
visibility: visible;
}

View File

@@ -62,6 +62,36 @@
.localuser {
color: #087dba;
}
.use-new-toolbox {
.chatmessage {
color: white;
}
.localuser {
color: #4C9AFF;
}
.remoteuser {
color: #B8C7E0;
}
#usermsg {
color: white;
}
.chatmessage,
#smileysarea,
#smileysContainer,
#usermsg {
background-color: $newToolbarBackgroundColor;
}
.smileyContainer:hover {
background-color: $newToolbarButtonToggleColor;
border-radius: 5px;
cursor: pointer;
}
}
.errorMessage {
color: red;

View File

@@ -1,64 +0,0 @@
#contacts_container {
cursor: default;
#contacts {
font-size: 12px;
bottom: 0px;
margin: 0;
margin-top: 12px;
padding: 0px;
width: 100%;
}
.clickable {
cursor: pointer;
}
.icon-security,
.icon-security-locked {
font-size: 16px;
}
}
#contacts {
.contact-list-item {
align-items: center;
border-radius: 3px;
color: $baseLight;
display: flex;
font-size: 14px;
height: 36px;
list-style-type: none;
padding: 0 10%;
text-align: left;
white-space: nowrap;
&:hover,
&:active {
background: $toolbarSelectBackground;
}
.contact-list-item-name {
overflow: hidden;
text-overflow: ellipsis;
}
.avatar {
cursor: pointer;
height: 24px;
margin: 0 8px 0 4px;
width: 24px;
}
}
}
.avatar {
padding: 0px;
margin-right: 10px;
vertical-align: middle;
font-size: 22pt;
border-radius: 20px;
max-height: 30px;
max-width: 30px;
}

View File

@@ -1,81 +0,0 @@
/**
* The dialog content element.
*/
.dial-out-content {
margin-top: 5px;
/**
* Wrap the contents in flex so items can be aligned on the same line.
*/
.form-control {
display: flex;
}
/**
* The style of the flag icon.
*/
.dial-out-flag-icon {
position: absolute;
left: 5px;
top: 50%;
transform: translate(0, -50%);
}
/**
* The style of the dial code element.
*/
.dial-out-code {
margin-bottom: 0;
padding-left: 25px;
}
/**
* The dial-out dialog error element.
*/
.dial-out-error {
color: $errorColor;
}
/**
* The style of the dial input element.
*/
.dial-out-input {
display: inline-block;
flex: 1;
margin-left: 5px;
}
/**
* Re-styling the default dropdown inside the dial-out-content.
*/
.dropdown {
position: relative;
width: 65px;
}
/**
* Re-styling the default form-control inside the dial-out-content.
*/
.form-control {
margin-bottom: 8px;
}
.dropdown {
position: relative;
input {
padding-left: 16px;
&:read-only {
color: inherit;
}
}
}
.dropdown-trigger-icon {
position: absolute;
right: 0;
top: 50%;
transform: translate(0, -50%);
}
}

View File

@@ -5,6 +5,20 @@
justify-content: flex-start;
}
.use-new-toolbox {
.filmstrip.reduce-height {
bottom: $newToolbarSizeWithPadding;
}
.filmstrip {
transition: bottom .3s;
}
.filmstrip__videos.hidden {
bottom: calc(-196px - #{$newToolbarSizeWithPadding});
}
}
.filmstrip {
position: absolute;
bottom: 0;
@@ -64,39 +78,8 @@
* The local video identifier.
*/
&#filmstripLocalVideo {
bottom: 32px;
align-self: flex-end;
display: block;
/**
* The invite button style.
*/
.filmstrip__invite {
padding-bottom: 5px;
margin-left: 2px;
}
/**
* The invite button group style.
* TOFIX: use AtlasKit.ButtonGroup if it starts supporting different
* flex grow options for the buttons.
*/
.invite-button-group {
display: inline-flex;
justify-content: space-between;
width: 100%;
& button {
flex-grow: 1;
flex-shrink: 1;
overflow: hidden;
}
& > * {
flex-grow: 0;
flex-shrink: 0;
margin-left: 2px;
}
}
}
&.hidden {

View File

@@ -1,35 +0,0 @@
.flag-icon-background {
background-size: contain;
background-position: 50%;
background-repeat: no-repeat;
}
.flag-icon {
background-size: contain;
background-position: 50%;
background-repeat: no-repeat;
position: relative;
display: inline-block;
width: 1.33333333em;
line-height: 1em;
}
.flag-icon:before {
content: "\00a0";
}
.flag-icon-au {
background-image: url(../images/countries/au.svg);
}
.flag-icon-ca {
background-image: url(../images/countries/ca.svg);
}
.flag-icon-de {
background-image: url(../images/countries/de.svg);
}
.flag-icon-gb {
background-image: url(../images/countries/gb.svg);
}
.flag-icon-fr {
background-image: url(../images/countries/fr.svg);
}
.flag-icon-us {
background-image: url(../images/countries/us.svg);
}

View File

@@ -24,7 +24,30 @@
-webkit-font-smoothing: antialiased;
-moz-osx-font-smoothing: grayscale;
}
.icon-arrow_back:before {
content: "\e5c4";
}
.icon-event_note:before {
content: "\e616";
}
.icon-menu:before {
content: "\e5d2";
}
.icon-navigate_before:before {
content: "\e408";
}
.icon-navigate_next:before {
content: "\e409";
}
.icon-public:before {
content: "\e80b";
}
.icon-restore:before {
content: "\e8b3";
}
.icon-timer:before {
content: "\e425";
}
.icon-thumb-menu:before {
content: "\e5d4";
}
@@ -157,3 +180,27 @@
.icon-gsm-bars:before {
content: "\e926";
}
.icon-open_in_new:before {
content: "\e89e";
}
.icon-AUD:before {
content: "\e900";
}
.icon-HD:before {
content: "\e927";
}
.icon-LD:before {
content: "\e928";
}
.icon-SD:before {
content: "\e929";
}
.icon-camera-take-picture:before {
content: "\e92a";
}
.icon-rec:before {
content: "\e92b";
}
.icon-live:before {
content: "\e92c";
}

View File

@@ -56,9 +56,6 @@
margin-bottom: 0px;
width: 100%;
border-radius: 0px;
> .aui-progress-indicator-value {
border-radius: 0px;
}
}
}
&__title {

View File

@@ -3,6 +3,7 @@
**/
.popupmenu {
min-width: 75px;
text-align: left;
padding: 0;
white-space: nowrap;

View File

@@ -1,3 +1,81 @@
.recordingSpinner {
vertical-align: top;
}
.live-stream-dialog {
/**
* Set font-size to be consistent with Atlaskit FieldText.
*/
font-size: 14px;
.broadcast-dropdown,
.broadcast-dropdown-trigger {
text-align: left;
}
.form-footer {
text-align: right;
}
.live-stream-cta {
a {
cursor: pointer;
}
}
.google-api {
margin-top: 10px;
min-height: 36px;
text-align: center;
width: 100%;
}
/**
* The Google sign in button must follow Google's design guidelines.
* See: https://developers.google.com/identity/branding-guidelines
*/
.google-sign-in {
background-color: #4285f4;
border-radius: 2px;
cursor: pointer;
display: inline-flex;
font-family: Roboto, arial, sans-serif;
font-size: 14px;
padding: 1px;
.google-cta {
color: white;
display: inline-block;
/**
* Hack the line height for vertical centering of text.
*/
line-height: 32px;
margin: 0 15px;
}
.google-logo {
background-color: white;
border-radius: 2px;
display: inline-block;
padding: 8px;
height: 18px;
width: 18px;
}
}
.google-panel {
align-items: center;
border-bottom: 2px solid rgba(0, 0, 0, 0.3);
display: flex;
flex-direction: column;
padding-bottom: 10px;
}
.stream-key-form {
.helper-link {
display: inline-block;
cursor: pointer;
margin-top: 5px;
}
}
}

View File

@@ -1,6 +1,37 @@
/**
* Toolbar side panel main container element.
*/
.use-new-toolbox #sideToolbarContainer {
background-color: $newToolbarBackgroundColor;
/**
* Make the sidebar flush with the top of the toolbar. Take the size of
* the toolbar and subtract from 100%.
*/
height: calc(100% - #{$newToolbarSizeWithPadding});
left: 0;
.side-toolbar-close {
background: gray;
border: 3px solid rgba(255, 255, 255, 0.1);
border-radius: 100%;
color: white;
cursor:pointer;
height: 10px;
line-height: 10px;
padding: 4px;
position: absolute;
right: 5px;
text-align: center;
top: 5px;
width: 10px;
z-index: 1;
}
#chatconversation {
top: 15px;
}
}
#sideToolbarContainer {
background-color: $sideToolbarContainerBg;
height: 100%;
@@ -22,8 +53,10 @@
/**
* Form elements and blocks.
*/
input, select, a,
.sideToolbarBlock, .form-control, .button-control {
input,
a,
.sideToolbarBlock,
.form-control {
display: block;
margin-top: 15px;
margin-left: 10%;
@@ -34,23 +67,15 @@
* Specify styling of elements inside a block.
*/
.sideToolbarBlock {
input, button, a, select {
input, a {
margin-left: 0;
margin-top: 5px;
width: 100%;
}
input[type='checkbox'] {
display: inline;
width: auto !important;
> label {
margin-top: 5px;
width: 80%;
}
}
}
/**
* Inner container, for example contact list, settings or profile.
* Inner container, for example settings or profile.
*/
.sideToolbarContainer__inner {
display: none;
@@ -80,42 +105,35 @@
font-size: $toolbarTitleFontSize;
}
/**
* Subtitle specific properties.
*/
div.subTitle {
color: $defaultSideBarFontColor !important;
font-size: 11px;
font-weight: 500;
margin-left: 10%;
text-align: left;
}
/**
* First element after a title.
*/
.first {
margin-top: 0 !important;
}
/**
* Buttons in the side toolbar container.
*/
.button-control {
margin: 9px 0;
width: 100%;
}
}
}
#device_settings {
width : auto !important;
text-align: center;
}
.settings-menu {
display: flex;
flex-direction: column;
padding-left: 10%;
padding-right: 10%;
#deviceOptionsWrapper {
button {
float: none;
.moderator-checkbox {
display: inline-block;
margin: 0 5px 0;
width: auto;
}
.moderator-option {
margin-top: 15px;
}
.subTitle {
color: $defaultSideBarFontColor;
font-size: 11px;
font-weight: 500;
}
}
}

View File

@@ -19,350 +19,282 @@
vertical-align: middle;
}
.toolbar-container {
display: block;
left:0;
min-height: 100px;
opacity: 0;
pointer-events: none;
position: absolute;
right:0;
text-align: center;
top:0;
z-index: $toolbarZ;
.use-new-toolbox {
.cxGWJB{
bottom: calc(#{$newToolbarSizeWithPadding});
}
.gXSEsl:nth-child(n+2) {
transform: translateX(0) translateY(100%) translateY(16px);
-ms-transform: translateX(0) translateY(100%) translateY(16px);
-webkit-transform: translateX(0) translateY(100%) translateY(16px);
}
}
/**
* Common toolbar styles.
* TODO: when the old filmstrip has been removed, remove the "new-" prefix.
*/
.toolbar {
height: 100%;
pointer-events: auto;
position: relative;
.new-toolbox {
background-color: $newToolbarBackgroundColor;
bottom: calc((#{$newToolbarSize} * 2) * -1);
box-sizing: border-box;
display: flex;
justify-content: space-between;
padding: 12px 8px;
position: absolute;
transition: bottom .3s ease-in;
width: 100%;
z-index: $toolbarZ;
/**
* Ensure nested elements that don't have a button class, maybe because they
* are wrapped in a React Element, still display in a line.
*/
> div {
display: inline-block;
&.visible {
bottom: 0;
}
/**
* Always on top overrides.
*/
&.always-on-top {
/**
* Toolbar button styles for always on top.
*/
> .button {
font-size: $alwaysOnTopToolbarFontSize;
height: $alwaysOnTopToolbarSize;
line-height: $alwaysOnTopToolbarSize;
width: $alwaysOnTopToolbarSize;
}
&.no-buttons {
display: none;
}
/**
* Toolbar button styles.
*/
.button {
color: $toolbarButtonColor;
cursor: pointer;
z-index: $zindex1;
display: inline-block;
font-size: $toolbarFontSize;
height: $defaultToolbarSize;
line-height: $defaultToolbarSize;
position: relative;
text-align: center;
top:0px;
vertical-align: middle;
width: $defaultToolbarSize;
&[disabled] {
opacity: 0.5;
}
&:hover, &:active {
color: $toolbarButtonColor;
cursor: pointer;
text-decoration: none;
}
&_hangup, &_hangup:hover {
color: $hangupColor;
font-size: $hangupFontSize;
}
&:not(.toggled) {
&:hover, &:active {
// sum opacity with background layer should give us 0.8
background: $toolbarSelectBackground;
}
}
&.toggled {
background: $toolbarToggleBackground;
&.icon-camera {
@extend .icon-camera-disabled;
}
&.icon-full-screen {
@extend .icon-exit-full-screen;
}
&.icon-microphone {
@extend .icon-mic-disabled;
}
}
&.unclickable {
cursor: default;
&:hover, &:active, &.selected {
background: none;
cursor: default;
}
}
}
/**
* Primary toolbar styles.
*/
&_primary {
background-color: $toolbarBackground;
position: absolute;
left: 50%;
top: 30px;
display: inline-block;
width: auto;
height: $defaultToolbarSize;
border-radius: 3px;
opacity: 0;
&.always-on-top {
height: $alwaysOnTopToolbarSize;
top: 10px;
}
@include transform(translateX(-50%));
> div:first-child .button {
border-bottom-left-radius: 3px;
border-top-left-radius: 3px;
}
> div:last-child .button {
border-bottom-right-radius: 3px;
border-top-right-radius: 3px;
}
}
&_primary a.button:last-child::after {
content: none;
}
/**
* Secondary toolbar styles.
*/
&_secondary {
background-color: $secondaryToolbarBg;
position: absolute;
align-items: center;
box-sizing: border-box;
display: -moz-box;
display: -ms-flexbox;
display: -webkit-box;
display: -webkit-flex;
.button-group-center,
.button-group-left,
.button-group-right {
display: flex;
flex-direction: column;
flex-wrap: nowrap;
width: 33%;
}
.button-group-center {
justify-content: center;
}
.button-group-right {
justify-content: flex-end;
}
i {
border-radius: 5px;
cursor: pointer;
display: block;
font-size: inherit;
height: 100%;
justify-content: flex-start;
left: 0;
padding-top: 24px;
top: 0;
transform: translateX(-100%);
width: $defaultToolbarSize;
-webkit-transform: translateX(-100%);
line-height: inherit;
width: 100%;
}
.button {
font-size: $secToolbarFontSize;
height: $secToolbarLineHeight;
line-height: $secToolbarLineHeight;
}
i:hover {
background-color: $newToolbarButtonHoverColor;
}
.button.toggled:not(.icon-raised-hand):not(.button-active) {
background: $secondaryToolbarBg;
i.toggled {
background: $newToolbarButtonToggleColor;
}
i.toggled:hover {
background-color: $newToolbarButtonHoverColor;
}
i.disabled {
cursor: initial
}
i.disabled:hover {
background-color: initial;
}
.icon-hangup {
color: $hangupColor;
font-size: $newToolbarHangupFontSize;
}
.overflow-menu {
font-size: 1.2em;
list-style-type: none;
/**
* Undo atlaskit padding by reducing margins.
*/
margin: -15px -24px;
padding: 4px 0;
.overflow-menu-item {
align-items: center;
color: #B8C7E0;
cursor: pointer;
text-decoration: none;
display: flex;
font-size: 14px;
height: 22px;
padding: 5px 12px;
&:hover {
background: #313D52;
}
&.unclickable {
cursor: default;
&:hover, &:active, &.selected {
background: none;
cursor: default;
}
}
&.unclickable:hover {
background: inherit;
}
}
.beta-tag {
background: #B8C7E0;
border-radius: 2px;
color: $newToolbarBackgroundColor;
font-family: -apple-system, BlinkMacSystemFont, $baseFontFamily;
font-size: 11px;
font-weight: bold;
margin-left: 8px;
padding: 0 6px;
}
.overflow-menu-item-icon {
margin-right: 10px;
i {
display: inline;
font-size: 24px;
}
i:hover {
background-color: initial;
}
img {
max-width: 24px;
max-height: 24px;
}
}
.profile-text {
max-width: 150px;
text-overflow: ellipsis;
overflow: hidden;
white-space: nowrap;
}
}
/**
* Styles the toolbar in filmstrip-only mode.
*/
&_filmstrip-only {
background-color: $toolbarBackground;
border-radius: 3px;
.toolbox-button {
color: $toolbarButtonColor;
cursor: pointer;
display: inline-block;
height: auto;
width: $defaultFilmStripOnlyToolbarSize;
line-height: $newToolbarSize;
margin: 0 4px;
text-align: center;
}
.button {
height: 37px;
line-height: 37px !important;
width: 37px;
}
.toolbar-button-with-badge {
position: relative;
.button-popover-message {
width: 100px;
}
.toolbar-button-wrapper:first-child .button {
border-top-left-radius: 3px;
border-top-right-radius: 3px;
}
.toolbar-button-wrapper:last-child .button {
border-bottom-right-radius: 3px;
border-bottom-left-radius: 3px;
.badge-round {
bottom: -5px;
font-size: 12px;
line-height: 20px;
min-width: 20px;
pointer-events: none;
position: absolute;
right: -5px;
}
}
/**
* Toolbar specific round badge.
*/
.badge-round {
bottom: 9px;
position: absolute;
right: 9px;
.toolbox-button-wth-dialog {
display: inline-block;
}
.toolbox-icon {
height: $newToolbarSize;
font-size: 24px;
width: $newToolbarSize;
}
}
.filmstrip-only {
.toolbox,
.toolbox-toolbars {
align-items: center;
display: flex;
.always-on-top-toolbox,
.filmstrip-toolbox {
background-color: $newToolbarBackgroundColor;
box-sizing: border-box;
display: flex;
flex-direction: column;
z-index: $toolbarZ;
i {
cursor: pointer;
display: block;
}
i:hover {
background-color: $newToolbarButtonHoverColor;
}
i.toggled {
background: $newToolbarButtonToggleColor;
}
i.toggled:hover:not(.disabled) {
background-color: $newToolbarButtonHoverColor;
}
.icon-hangup {
color: $hangupColor;
}
.toolbox-button {
color: $toolbarButtonColor;
cursor: pointer;
text-align: center;
}
border-radius: 3px;
}
.always-on-top-toolbox {
flex-direction: row;
left: 50%;
position: absolute;
top: 10px;
transform: translateX(-50%);
z-index: $toolbarZ;
i {
font-size: $newToolbarFontSize;
height: $newToolbarSize;
line-height: $newToolbarSize;
width: $newToolbarSize;
}
.icon-hangup {
font-size: $newToolbarHangupFontSize;
}
.disabled {
cursor: initial;
}
.toolbox-button:first-child i {
border-top-left-radius: 3px;
border-bottom-left-radius: 3px;
}
.toolbox-button:last-child i {
border-top-right-radius: 3px;
border-bottom-right-radius: 3px;
}
}
.subject {
background: linear-gradient(to bottom, rgba(255,255,255,.85) , rgba(255,255,255,.35));
border-bottom-left-radius: 12px;
border-bottom-right-radius: 12px;
box-shadow: 0 0 2px #000000, 0 0 10px #000000;
margin-left: 40%;
margin-right: 40%;
padding: 5px;
position: relative;
text-align: center;
width: auto;
z-index: $zindex3;
&.subject_slide-in {
top: 80px;
@include transition(top .3s ease-in);
.filmstrip-toolbox {
i {
font-size: 1.9em;
height: 37px;
line-height: 37px;
width: 37px;
}
&.subject_slide-out {
top: 0;
@include transition(top .3s ease-out);
.toolbox-button:first-child i {
border-top-left-radius: 3px;
border-top-right-radius: 3px;
}
.toolbox-button:last-child i {
border-bottom-left-radius: 3px;
border-bottom-right-radius: 3px;
}
}
#toolbar_button_profile {
height: $toolbarAvatarSize + 2*$toolbarAvatarPadding;
}
a.button>#avatar {
border-radius: 50%;
padding-bottom: $toolbarAvatarPadding;
padding-top: $toolbarAvatarPadding;
width: $toolbarAvatarSize;
}
#feedbackButton {
margin-top: auto;
}
/**
* START of slide in animation for extended toolbar.
*/
@include keyframes(slideInX) {
0% { transform: translateX(-100%); }
100% { transform: translateX(0%); }
}
.slideInX {
@include animation('slideInX .5s forwards');
}
@include keyframes(slideOutX) {
0% { transform: translateX(0%); }
100% { transform: translateX(-100%); }
}
.slideOutX {
@include animation('slideOutX .5s forwards');
}
@include keyframes(slideInExtX) {
0% { transform: translateX(-500%); }
100% { transform: translateX(0%); }
}
.slideInExtX {
@include animation('slideInExtX .5s forwards');
}
@include keyframes(slideOutExtX) {
0% { transform: translateX(0%); }
100% { transform: translateX(-500%); }
}
.slideOutExtX {
@include animation('slideOutExtX .5s forwards');
}
/**
* END of slide out animation for extended toolbar.
*/
/**
* START of slide in / out animation for main toolbar.
*/
@include keyframes(slideInY) {
100% { transform: translateY(0%); }
}
.slideInY {
@include animation('slideInY .5s forwards');
}
@include keyframes(slideOutY) {
0% { transform: translateY(0%); }
100% { transform: translateY(-100%); }
}
.slideOutY {
@include animation('slideOutY .5s forwards');
}
/**
* END of slide in / out animation for main toolbar.
*/
/**
* START of slide in animation for extended toolbar panel.
*/

View File

@@ -1,3 +1,11 @@
.flip-x {
transform: scaleX(-1);
}
.hidden {
display: none;
}
/**
* Hides an element.
*/
@@ -5,6 +13,10 @@
display: none !important;
}
.invisible {
visibility: hidden;
}
/**
* Shows an element.
*/
@@ -35,4 +47,4 @@
display: -ms-flexbox !important;
display: -webkit-flex !important;
display: flex !important;
}
}

View File

@@ -32,24 +32,16 @@ $defaultDarkColor: #2b3d5c;
/**
* Toolbar
*/
$alwaysOnTopToolbarFontSize: 1em;
$alwaysOnTopToolbarSize: 30px;
$defaultToolbarSize: 50px;
$defaultFilmStripOnlyToolbarSize: 37px;
$secToolbarFontSize: 1.9em;
$secToolbarLineHeight: 45px;
$toolbarAvatarPadding: 10px;
$toolbarAvatarSize: 40px;
$toolbarFontSize: 1.9em;
$newToolbarBackgroundColor: rgba(22, 38, 55, 0.8);
$newToolbarButtonHoverColor: rgba(14, 20, 35, 0.6);
$newToolbarButtonToggleColor: rgba(14, 20, 35, 1);
$newToolbarFontSize: 24px;
$newToolbarHangupFontSize: 32px;
$newToolbarSize: 40px;
$newToolbarSizeWithPadding: calc(#{$newToolbarSize} + 24px);
$toolbarTitleFontSize: 19px;
/**
* Main controls
* TODO: looks like we don't use it
*/
$inputSemiBackground: rgba(132, 132, 132, .8);
$inputLightBackground: #EBEBEB;
/**
* Video layout
*/
@@ -74,10 +66,6 @@ $feedbackInputBg: #fff;
$feedbackTextColor: #000;
$feedbackInputTextColor: #333;
$feedbackInputPlaceholderColor: #777;
$rateStarLabelColor: #333;
$rateStarDefault: #ccc;
$rateStarActivity: #165ecc;
$rateStarSize: 34px;
/**
* Modals
@@ -138,8 +126,8 @@ $formPadding: 16px;
/**
* Unsupported browser
*/
$primaryUnsupportedBrowserButtonBgColor: #17a0db;
$unsupportedBrowserButtonBgColor: #ff9a00;
$primaryUnsupportedBrowserButtonBgColor: #0052CC;
$unsupportedBrowserButtonBgColor: rgba(9, 30, 66, 0.04);
$unsupportedBrowserTextColor: #4a4a4a;
$unsupportedBrowserTextSmallFontSize: 17px;
$unsupportedBrowserTitleColor: #fff;
@@ -151,4 +139,12 @@ $unsupportedDesktopBrowserTextFontSize: 21px;
* The size of the default watermark.
*/
$watermarkWidth: 186px;
$watermarkHeight: 74px;
$watermarkHeight: 74px;
/**
* Welcome page variables.
*/
$welcomePageDescriptionColor: #fff;
$welcomePageFontFamily: inherit;
$welcomePageHeaderBackground: linear-gradient(#165ecc, #44A5FF);
$welcomePageTitleColor: #fff;

View File

@@ -2,6 +2,37 @@
* Override other styles to support vertical filmstrip mode.
*/
.vertical-filmstrip {
/*
* Firefox sets flex items to min-height: auto and min-width: auto,
* preventing flex children from shrinking like they do on other browsers.
* Setting min-height and min-width 0 is a workaround for the issue so
* Firefox behaves like other browsers.
* https://bugzilla.mozilla.org/show_bug.cgi?id=1043520
*/
@mixin minHWAutoFix() {
min-height: 0;
min-width: 0;
}
#etherpad,
#sharedvideo {
text-align: left;
}
&.use-new-toolbox {
/**
* Adjust the height of the filmstrip as the toolbar is displayed.
*/
.filmstrip {
top: 0;
transition: height .3s ease-in;
&.reduce-height {
height: calc(100% - #{$newToolbarSizeWithPadding});
}
}
}
.filmstrip {
align-items: flex-end;
box-sizing: border-box;
@@ -15,14 +46,7 @@
* any parent is also fixed.
*/
position: fixed;
/**
* z-index adjusting is needed because the video state indicator has to
* display over the filmstrip when no videos are displayed but still be
* clickable but its inline dialogs must display over the video state
* indicator when videos are displayed.
*/
z-index: #{$tooltipsZ + 1};
z-index: $filmstripVideosZ;
/**
* Hide videos by making them slight to the right.
@@ -42,8 +66,9 @@
&#remoteVideos {
/**
* Remove horizontal filmstrip padding used to prevent videos
* from overlapping the left-side toolbar. An id selector is
* used to match id specificity with filmstrip styles.
* from overlapping getting near the left-side of the screen.
* An id selector is used to match id specificity with filmstrip
* styles.
*/
padding-left: 0;
transition: right 2s;
@@ -51,21 +76,15 @@
}
/**
* Re-styles the local Video and invite button to better fit the
* vertical filmstrip layout.
* Re-styles the local Video to better fit vertical filmstrip layout.
*/
#filmstripLocalVideo {
align-self: initial;
bottom: 5px;
display: flex;
flex-direction: column-reverse;
height: auto;
justify-content: flex-start;
.filmstrip__invite {
padding-bottom: 0px;
padding-top: 5px;
z-index: $dropdownZ;
}
}
/**
@@ -78,6 +97,8 @@
}
#filmstripRemoteVideos {
@include minHWAutoFix();
display: flex;
flex: 1;
flex-direction: column;
@@ -86,6 +107,11 @@
#filmstripRemoteVideosContainer {
flex-direction: column-reverse;
/**
* Add padding as a hack for Firefox not to show scrollbars when
* unnecessary.
*/
padding: 1px 0;
overflow-x: hidden;
}
}
@@ -115,6 +141,8 @@
}
#remoteVideos {
@include minHWAutoFix();
flex-direction: column;
flex-grow: 1;
}
@@ -141,20 +169,6 @@
.filmstrip__videos-filmstripOnly {
height: 100%;
}
/**
* In filmstrip only mode, the toolbar is normally displayed in the
* vertical center of the filmstrip strip. In vertical filmstrip mode,
* that alignment makes the toolbar appear floating and detached from
* the filmstrip. So, instead anchor the toolbar next to the local
* video.
*/
.toolbar_filmstrip-only {
bottom: 0;
top: auto;
transform: none;
}
}
/**
@@ -168,17 +182,9 @@
* The class opening is for when the filmstrip is transitioning from hidden
* to visible.
*/
.video-state-indicator.moveToCorner {
transition: right 0.5s;
.large-video-labels {
&.with-filmstrip {
&#recordingLabel {
right: 200px;
}
&#videoResolutionLabel {
right: 150px;
}
right: 150px;
}
&.with-filmstrip.opening {
@@ -224,3 +230,35 @@
}
}
}
/**
* Workarounds for Edge, IE11, and Firefox not handling scrolling properly
* with flex-direction: column-reverse. The remove videos in filmstrip should
* start scrolling from the bottom of the filmstrip, but in those browsers the
* scrolling won't happen. Per W3C spec, scrolling should happen from the
* bottom. As such, use css hacks to get around the css issue, with the intent
* being to remove the hacks as the spec is supported.
*/
@mixin undoColumnReverseVideos() {
.vertical-filmstrip {
#remoteVideos #filmstripRemoteVideos #filmstripRemoteVideosContainer {
flex-direction: column;
}
}
}
/** Firefox detection hack **/
@-moz-document url-prefix() {
@include undoColumnReverseVideos();
}
/** IE11 detection hack **/
@media screen and (-ms-high-contrast: active),
screen and (-ms-high-contrast: none) {
@include undoColumnReverseVideos();
}
/** Edge detection hack **/
@supports (-ms-ime-align:auto) {
@include undoColumnReverseVideos();
}

View File

@@ -4,6 +4,8 @@
#videospace {
display: block;
height: 100%;
width: 100%;
min-height: 100%;
position: absolute;
top: 0px;
@@ -12,14 +14,27 @@
overflow: hidden;
}
.video_blurred_container {
#largeVideoBackgroundContainer,
.large-video-background {
height: 100%;
filter: blur(40px);
left: 0;
overflow: hidden;
position: absolute;
top: 0;
width: 100%;
&.fit-full-height #largeVideoBackground {
height: 100%;
width: auto;
}
.fit-full-width #largeVideoBackground {
height: auto;
width: 100%;
}
}
#largeVideoBackgroundContainer {
filter: blur(40px);
}
.videocontainer {
@@ -211,6 +226,11 @@
text-align: center;
}
#largeVideoContainer {
height: 100%;
width: 100%;
}
#largeVideoWrapper {
box-shadow: 0 0 20px -2px #444;
}
@@ -250,6 +270,7 @@
/**
* Positions video thumbnail display name and editor.
*/
#alwaysOnTop .displayname,
.videocontainer .displayname,
.videocontainer .editdisplayname {
display: inline-block;
@@ -269,6 +290,15 @@
z-index: $zindex2;
}
#alwaysOnTop .displayname {
font-size: 15px;
position: inherit;
width: 100%;
left: 0px;
top: 0px;
margin-top: 10px;
}
/**
* Positions video thumbnail display name editor.
*/
@@ -507,6 +537,20 @@
width: auto;
}
#videoNotAvailableScreen {
text-align: center;
#avatarContainer {
height: 50vh;
display:inline-block;
margin-top: 25vh;
#avatar {
border-radius: 50%;
height: 100%;
}
}
}
.sharedVideoAvatar {
height: 100%;
width: 100%;
@@ -605,3 +649,93 @@
1px 0px 1px rgba(0,0,0,0.3),
0px 0px 1px rgba(0,0,0,0.3);
}
.display-avatar-with-name {
.avatar-container {
visibility: visible;
}
.displayNameContainer {
visibility: visible;
}
.videocontainer__hoverOverlay {
visibility: visible;
}
video {
visibility: hidden;
}
}
.display-name-on-black {
.avatar-container {
visibility: hidden;
}
.displayNameContainer {
visibility: visible;
}
.videocontainer__hoverOverlay {
visibility: hidden;
}
video {
visibility: hidden;
}
}
.display-video {
.avatar-container {
visibility: hidden;
}
.displayNameContainer {
visibility: hidden;
}
.videocontainer__hoverOverlay {
visibility: hidden;
}
video {
visibility: visible;
}
}
.display-name-on-video {
.avatar-container {
visibility: hidden;
}
.displayNameContainer {
visibility: visible;
}
.videocontainer__hoverOverlay {
visibility: visible;
}
video {
visibility: visible;
}
}
.display-avatar-only {
.avatar-container {
visibility: visible;
}
.displayNameContainer {
visibility: hidden;
}
.videocontainer__hoverOverlay {
visibility: hidden;
}
video {
visibility: hidden;
}
}

View File

@@ -1,206 +1,93 @@
#welcome_page {
height: 100%;
body.welcome-page {
background: inherit;
overflow: auto;
}
.welcome {
font-family: $welcomePageFontFamily;
height: 100%;
position: relative;
}
#disable_welcome {
display:none;
}
.disable_welcome_position
{
margin: -139px auto 0px auto;
padding-left: 39px;
padding-top: 7px;
width: 269px;
height: 31px;
display:block;
}
#disable_welcome + label
{
background-image: url(../images/welcome_page/disable-welcome.png);
cursor: pointer;
-webkit-user-select: none;
-moz-user-select: none;
background-repeat: no-repeat;
font-weight: 500;
font-size: 16px;
color: #acacac;
z-index: $zindex2;
}
#disable_welcome:checked + label
{
background-image: url(../images/welcome_page/disable-welcome-selected.png);
cursor: pointer;
-webkit-user-select: none;
-moz-user-select: none;
background-repeat: no-repeat;
font-weight: 500;
font-size: 16px;
color: #acacac;
z-index: $zindex2;
}
#enter_room_form {
border-radius: 1px;
background-color: #FFFFFF;
border: none;
-moz-border-radius: 1px;
-webkit-border-radius: 1px;
-webkit-appearance: none;
height: 55px;
box-shadow: none;
float: left;
}
.domain-name
{
float: left;
height: 55px;
line-height: 55px;
font-size: 18px;
font-weight: 500;
padding-left: 20px;
color: $defaultDarkColor;
}
.enter-room {
&__field {
font-size: 15px;
border: none;
-webkit-appearance: none;
width: 228px;
height: 55px;
line-height: 55px;
font-weight: 500;
box-shadow: none;
float: left;
background-color: #FFFFFF;
.header {
align-items: center;
background: $welcomePageHeaderBackground;
display: flex;
flex-direction: column;
overflow: hidden;
position: relative;
z-index: $zindex2;
}
&__reload {
display: block;
width: 30px;
color: #acacac;
font-size: 1.9em;
line-height: 55px;
z-index: $zindex3;
float: left;
cursor: pointer;
text-align: center;
.header-text {
display: flex;
flex-direction: column;
justify-content: space-around;
margin-top: 120px;
margin-bottom: 20px;
max-width: calc(100% - 40px);
min-height: 286px;
width: 645px;
}
.header-text-title {
color: $welcomePageTitleColor;
font-size: 48px;
letter-spacing: -1px;
line-height: 58px;
margin-bottom: 20px;
}
.header-text-description {
color: $welcomePageDescriptionColor;
font-size: 20px;
line-height: 28px;
opacity: 0.8;
}
.header-image {
background-image: url(../images/welcome_page/curves.png);
background-size: contain;
height: 209px;
position: absolute;
width: 1070px;
}
#new_enter_room {
align-items: center;
display: flex;
margin-bottom: 20px;
max-width: calc(100% - 40px);
position: relative;
z-index: 2;
.enter-room-input {
display: inline-block;
margin-right: 15px;
width: 350px;
}
}
}
&__button {
width: 73px;
height: 45px;
background-color: #21B9FC;
moz-border-radius: 1px;
-webkit-border-radius: 1px;
color: #ffffff;
font-weight: 600;
border: none;
margin-top: 5px;
font-size: 19px;
padding-top: 6px;
outline: none;
float:left;
position: relative;
z-index: $zindex2;
.welcome-page-button {
font-size: 16px;
}
}
#enter_room_container {
margin: 70px auto 0px auto;
display: table;
.welcome.with-content {
.header {
min-height: 552px;
}
.header-image {
left: -61px;
top: 401px;
}
}
#enter_room{
float:left;
padding-right: 5px;
}
#welcome_page_header
{
background-image: url(../images/welcome_page/pattern-header.png);
height: 290px;
width: 100%;
position: absolute;
}
#welcome_page_main
{
background-image:url(../images/welcome_page/pattern-body.png);
width: 100%;
position: absolute;
margin-top: 290px;
}
#brand_header
{
background-image:url(../images/welcome_page/header-big.png);
width: 583px;
height: 274px;
margin: -110px auto 0px auto;
}
#header_text
{
width: 885px;
height: 100px;
color: #ffffff;
font-size: 24px;
text-align: center;
margin: 0px auto 0px auto;
}
#features
{
margin-top: 30px;
position: relative;
}
.feature_row
{
position: relative;
width: 976px;
margin: 0px auto 30px auto;
padding-right: 75px;
}
.feature_holder
{
float:left;
width: 169px;
padding-left: 75px;
padding-bottom: 30px;
}
.feature_icon
{
background-image:url(../images/welcome_page/bubble.png);
background-repeat: no-repeat;
width: 169px;
height: 169px;
color: #ffffff;
font-size: 22px;
/*font-weight: bold;*/
text-align: center;
display: table-cell;
padding: 50px 26px 0px 20px;
}
.feature_description
{
width: 190px;
color: #ffffff;
font-size: 16px;
padding-top: 30px;
line-height: 22px;
font-weight: 200;
.welcome.without-content {
.header {
height: 100%;
}
.header-image {
bottom: -20px;
left: 0;
}
}

View File

@@ -0,0 +1 @@
/** Insert custom CSS for any additional content in the welcome page **/

View File

@@ -0,0 +1,75 @@
.deep-linking-desktop {
background-color: #fff;
width: 100%;
height: 100%;
display: flex;
flex-flow: column;
.header {
width: 100%;
height: 55px;
background-color: #f1f2f5;
padding-top: 15px;
padding-left: 50px;
display: flex;
flex-flow: row;
flex: 0 0 55px;
.logo {
height: 40px;
}
}
.content {
padding-top: 40px;
padding-bottom: 40px;
left: 0px;
right: 0px;
display: flex;
width: 100%;
height: 100%;
flex-flow: row;
.leftColumn {
left: 0px;
width: 50%;
min-height: 156px;
display: flex;
flex-flow: column;
.leftColumnContent{
padding: 20px;
display: flex;
flex-flow: column;
height: 100%;
.image {
background-image: url('../images/deep-linking-image.png');
background-repeat: no-repeat;
background-position: center;
background-size: contain;
height: 100%;
width: 100%;
}
}
}
.rightColumn {
top: 0px;
width: 50%;
min-height: 156px;
display: flex;
flex-flow: row;
align-items: center;
.rightColumnContent {
display: flex;
flex-flow: column;
padding: 20px 20px 20px 60px;
.title {
color: #1c2946;
}
.description {
color: #606a80;
margin-top: 8px;
}
.buttons {
margin-top: 16px;
}
}
}
}
}

View File

@@ -0,0 +1,3 @@
@import 'desktop';
@import 'mobile';
@import 'no-mobile-app';

View File

@@ -0,0 +1,117 @@
.deep-linking-mobile {
background-color: #fff;
height: 100vh;
overflow: auto;
position: relative;
width: 100vw;
.header {
width: 100%;
height: 70px;
background-color: #f1f2f5;
text-align: center;
.logo {
margin-top: 15px;
margin-left: auto;
margin-right: auto;
height: 40px;
}
}
a {
text-decoration: none
}
&__body {
color: $unsupportedBrowserTextColor;
margin: auto;
max-width: 40em;
padding: 35px 0 40px 0;
text-align: center;
width: 75%;
a:active {
text-decoration: none;
}
.image {
max-width: 80%;
}
}
&__text {
font-weight: bolder;
padding: 10px 10px 0px 10px;
}
&__text,
.deep-linking-dial-in {
font-size: 1.2em;
line-height: em(29px, 21px);
margin-bottom: 0.65em;
&_small {
font-size: 1.5em;
margin-bottom: 1em;
margin-top: em(21, 18);
strong {
font-size: em(21, 18);
}
}
}
&__href {
height: 2.2857142857142856em;
line-height: 2.2857142857142856em;
margin: 18px auto 20px;
max-width: 300px;
width: auto;
font-weight: bolder;
}
&__button {
border: 0;
height: 2.2857142857142856em;
line-height: 2.2857142857142856em;
margin: 18px auto 10px;
padding: 0px 10px 0px 10px;
max-width: 300px;
width: auto;
@include border-radius(3px);
background-color: $unsupportedBrowserButtonBgColor;
color: #505F79;
font-weight: bold;
&:active {
background-color: $unsupportedBrowserButtonBgColor;
}
&_primary {
background-color: $primaryUnsupportedBrowserButtonBgColor;
color: #FFFFFF;
&:active {
background-color: $primaryUnsupportedBrowserButtonBgColor;
}
}
}
.deep-linking-dial-in {
display: none;
&.has-numbers {
align-items: center;
display: flex;
flex-direction: column;
}
.dial-in-numbers-list {
color: $unsupportedBrowserTextColor;
}
.dial-in-numbers-body {
vertical-align: top;
}
}
}

View File

@@ -5,7 +5,7 @@
width: auto;
&__title {
border-bottom: 1px solid $auiBorderColor;
border-bottom: 1px solid $inlayBorderColor;
color: $unsupportedBrowserTitleColor;
font-weight: 400;
letter-spacing: 0.5px;

View File

@@ -28,11 +28,9 @@
@import 'font-awesome';
/* Fonts END */
@import 'flag-icon';
/* Modules BEGIN */
@import 'dial-out';
@import 'aui_reset';
@import 'base';
@import 'utils';
@import 'overlay/overlay';
@@ -50,10 +48,10 @@
@import 'popup_menu';
@import 'recording';
@import 'login_menu';
@import 'contact_list';
@import 'chat';
@import 'ringing/ringing';
@import 'welcome_page';
@import 'welcome_page_content';
@import 'toolbars';
@import 'side_toolbar_container';
@import 'jquery.contextMenu';
@@ -64,7 +62,6 @@
@import 'components/button-control';
@import 'components/input-control';
@import 'components/input-slider';
@import "modals/invite/invite";
@import "connection-info";
@import 'aui-components/dropdown';
@import '404';
@@ -74,5 +71,6 @@
@import 'unsupported-browser/main';
@import 'modals/invite/add-people';
@import 'vertical_filmstrip_overrides';
@import 'deep-linking/main';
/* Modules END */

View File

@@ -1,6 +1,10 @@
.dialog {
visibility: visible;
box-sizing: border-box;
height: auto;
min-height: 131px;
overflow: visible;
visibility: visible;
width: 400px;
h1, h2, h3, h4, h5, h6 {
color: $auiDialogColor;
@@ -10,10 +14,27 @@
&-icon {
color: $auiDialogColor;
text-indent: -999em;
&-small {
width: 14px;
height: 14px;
&:before {
color: inherit;
font-family: "FontAwesome";
font-size: 16px;
-webkit-font-smoothing: antialiased;
font-style: normal;
font-weight: normal;
left: 0;
line-height: 1;
margin-top: -8px;
position: absolute;
text-indent: 0;
speak: none;
top: 50%;
}
}
}
@@ -22,6 +43,10 @@
right: 20px;
position: absolute;
top: -49px;
&:before {
content: "\f00d";
}
}
&-dialog2 {
@@ -31,8 +56,16 @@
}
&-header {
height: em(58, 12);
border-bottom: 1px solid $auiBorderColor;
border-radius: 5px 5px 0 0;
box-sizing: border-box;
color: #333;
display: table;
font-weight: normal;
height: em(58, 12);
margin-top: -69px;
padding: 0 20px;
width: 100%;
h2 {
font-size: em(20, 12);
@@ -41,19 +74,40 @@
}
&-main {
display: table-cell;
padding-right: 0;
max-width: 400px;
overflow: hidden;
text-overflow: ellipsis;
vertical-align: middle;
white-space: nowrap;
}
}
&-footer {
border-top: 1px solid $auiBorderColor;
border-radius: 0 0 5px 5px;
box-sizing: border-box;
height: 51px;
overflow: hidden;
padding: 10px 20px;
width: 100%;
&:empty {
height: 5px;
padding: 0;
}
}
&-content {
font-size: em(14, 12);
min-height: 0;
background-color: $auiDialogContentBg;
background-color: $auiDialogBg;
box-sizing: border-box;
color: $auiDialogColor;
font-size: em(14, 12);
overflow: auto;
max-height: 100%;
padding: 20px;
p,span, h3 {
font-weight: $labelFontWeight;
@@ -72,13 +126,23 @@
}
}
.input-control {
background-color: $auiDialogContentBg;
color: $auiDialogColor;
}
.form-control:not(:last-child) {
border-bottom: 1px solid $auiBorderColor;
}
}
@media all and (max-width: 420px) {
.aui-dialog2-small .aui-dialog2-content {
height: 100%;
}
}
.modal-dialog-form {
color: $modalTextColor;
margin-top: 5px !important;
.input-control {
@@ -90,6 +154,14 @@
&-error {
margin-bottom: 8px;
}
/**
* Override Atlaskit dropdown styling when in a modal because the dropdown
* backgrounds clash with the modal backgrounds.
*/
.htclLc[data-role=droplistContent] {
border: 1px solid #455166;
}
}
.modal-dialog-footer {
font-size: $modalButtonFontSize;

View File

@@ -36,13 +36,12 @@
}
.desktop-picker-source {
color: $defaultDarkFontColor;
margin-top: 10px;
text-align: center;
&.is-selected {
.desktop-source-preview-image-container {
background: rgba(0, 0, 0, 0.1);
background: rgba(255,255,255,0.3);
border-radius: $borderRadius;
}
}

View File

@@ -1,16 +1,10 @@
.device-selection {
color: $feedbackInputTextColor;
.device-selectors {
font-size: 14px;
> div {
display: block;
margin-bottom: 10px;
}
> div:last-child {
margin-bottom: 5px;
margin-bottom: 4px;
}
.device-selector-icon {
@@ -20,21 +14,21 @@
margin-left: 3px;
}
.device-selector-label {
margin-bottom: 1px;
}
/* device-selector-trigger stylings attempt to mimic AtlasKit button */
.device-selector-trigger {
background-color: rgba(9, 30, 66, 0.04);
border-radius: 3px;
color: #505f79;
background-color: #0E1624;
border: 1px solid #455166;
border-radius: 5px;
display: flex;
height: 2.3em;
justify-content: space-between;
line-height: 2.3em;
overflow: hidden;
padding: 0 8px;
&:hover {
background-color: rgba(9,30,66,.08);
}
}
.device-selector-trigger-disabled {
.device-selector-trigger {
@@ -107,20 +101,21 @@
.audio-output-preview {
font-size: 14px;
margin-top: 10px;
a {
color: 4C9AFF;
cursor: pointer;
text-decoration: none;
}
}
.audio-input-preview {
background: #f4f5f7;
background: #1B2638;
border-radius: 5px;
height: 6px;
height: 8px;
.audio-input-preview-level {
background: #0052cc;
background: #4C9AFF;
border-radius: 5px;
height: 100%;
-webkit-transition: width .1s ease-in-out;

View File

@@ -47,10 +47,6 @@
.feedback-dialog {
.details {
margin-top: 20px;
padding-left: 60px;
padding-right: 60px;
textarea {
min-height: 100px;
}
@@ -77,16 +73,15 @@
text-align: center;
.star-label {
color: $rateStarLabelColor;
font-size: 14px;
height: 16px;
}
.star-btn {
color: $rateStarDefault;
color: inherit;
cursor: pointer;
display: inline-block;
font-size: $rateStarSize;
font-size: 34px;
outline: none;
position: relative;
text-decoration: none;
@@ -95,7 +90,7 @@
&.active,
&:hover,
&.starHover {
color: $rateStarActivity;
color: #36B37E;
};
}

View File

@@ -11,17 +11,19 @@
padding-left: 5px;
}
}
}
}
/**
* Styles the loading element in the MultiSelectAutocomplete.
*/
.autocomplete-loading {
justify-content: center;
display: flex;
min-width: 260px;
padding: 20px;
.add-telephone-icon {
display: flex;
height: 28px;
transform: scaleX(-1);
width: 28px;
i {
line-height: 28px;
margin: auto;
}
}
}
}
/**

View File

@@ -1,19 +1,27 @@
.use-new-toolbox {
font-size: 14px;
}
.info-dialog {
cursor: default;
display: flex;
.info-dialog-action-link {
display: inline-block;
line-height: 1.5em;
a {
cursor: pointer;
vertical-align: middle;
}
}
.info-dialog-action-link:before {
color: $linkFontColor;
content: '\2022';
font-size: 1.5em;
padding: 0 10px;
vertical-align: middle;
}
.info-dialog-action-link:first-child:before {
@@ -22,6 +30,8 @@
}
.info-dialog-action-links {
font-weight: bold;
margin-top: 10px;
white-space: nowrap;
}
@@ -32,21 +42,39 @@
.info-dialog-copy-element {
opacity: 0;
pointer-events: none;
position: fixed;
position: absolute;
-webkit-user-select: text;
user-select: text;
}
.info-dialog-column {
margin-right: 10px;
overflow: hidden;
a,
a:active,
a:focus,
a:hover {
text-decoration: none;
}
}
.info-dialog-conference-url {
margin: 10px 0;
max-width: 250px;
overflow: hidden;
text-overflow: ellipsis;
.info-dialog-conference-url,
.info-dialog-live-stream-url {
width: max-content;
width: -moz-max-content;
width: -webkit-max-content;
word-break: break-all;
max-width: 400px;
}
.info-dialog-dial-in {
white-space: nowrap;
.conference-id,
.phone-number {
user-select: text;
}
}
.info-dialog-icon {
@@ -54,7 +82,76 @@
font-size: 16px;
}
.info-dialog-url-text,
.info-dialog-url-text:hover {
color: inherit;
cursor: inherit;
}
.info-dialog-title {
font-weight: bold;
margin-bottom: 10px;
}
.info-dialog-password,
.info-password,
.info-password-form {
align-items: baseline;
display: flex;
}
.info-label {
font-weight: bold;
}
.info-password-field {
overflow: hidden;
text-overflow: ellipsis;
white-space: nowrap;
}
.info-password-none,
.info-password-remote {
opacity: 0.5;
}
.info-password-input {
background-color: transparent;
border: none;
color: inherit;
padding-left: 0;
}
.info-password-local {
user-select: text;
}
}
.dial-in-page {
align-items: center;
display: flex;
flex-direction: column;
font-size: 24px;
height: 100%;
justify-content: center;
width: 100%;
.dial-in-numbers-list {
font-size: 24px;
margin-top: 20px;
}
.dial-in-conference-id {
text-align: center;
width: 30%;
}
}
.info-dialog,
.dial-in-page {
* {
user-select: text;
-moz-user-select: text;
-webkit-user-select: text;
}
}

View File

@@ -1,96 +0,0 @@
/*
* Sets the default cursor the remove password link. The link doesn't use
* the href attribute, so we need to set the cursor manually.
*/
#inviteDialogRemovePassword {
cursor: hand;
}
.invite-dialog {
.dial-in-numbers {
.dial-in-numbers-conference-id {
color: orange;
margin-left: 3px;
}
/*
* dial-in-numbers-copy styling is needed for the feature of copying
* text to the clipboard. The styling keeps the element invisible
* to the user but still programmatically selectable for copying.
*/
.dial-in-numbers-copy {
opacity: 0;
pointer-events: none;
position: fixed;
-webkit-user-select: text;
user-select: text;
}
.is-disabled,
.is-loading {
.dial-in-numbers-trigger-icon {
display: none;
}
}
}
.form-control {
padding: 0;
&__container {
/**
* Ensure contents display in a line and vertically centered.
*/
align-items: center;
button {
font-size: $modalButtonFontSize;
}
}
&__input-container {
flex: 1;
margin-right: 10px;
.dropdown-button-trigger {
text-align: left;
}
}
}
.inviteLink {
color: $readOnlyInputColor;
}
.lock-state {
display: flex;
}
.password-overview {
margin-top: 10px;
.form-control {
margin-top: 10px;
}
.password-overview-status,
.remove-password {
display: flex;
justify-content: space-between;
}
.password-overview-toggle-edit,
.remove-password-link {
cursor: pointer;
text-decoration: none;
}
.remove-password {
margin-top: 15px;
}
}
.remove-password-current {
color: $inputControlEmColor;
}
}

View File

@@ -42,10 +42,6 @@
width: 55%;
}
.speaker-stats-item:nth-child(even) {
background: whitesmoke;
}
.speaker-stats-item__name,
.speaker-stats-item__time {
overflow: hidden;

View File

@@ -135,62 +135,64 @@
}
}
.video-state-indicator {
background: $videoStateIndicatorBackground;
cursor: default;
font-size: 13px;
height: $videoStateIndicatorSize;
line-height: 20px;
text-align: left;
min-width: $videoStateIndicatorSize;
border-radius: 50%;
position: absolute;
box-sizing: border-box;
i {
line-height: $videoStateIndicatorSize;
.modal-dialog-form {
.video-quality-dialog-title {
display: none;
}
/**
* Give the label padding so it has more volume and can be easily clicked.
*/
.video-quality-label-status {
line-height: $videoStateIndicatorSize;
min-width: $videoStateIndicatorSize;
text-align: center;
}
}
.centeredVideoLabel.moveToCorner {
z-index: $tooltipsZ;
}
#videoResolutionLabel {
z-index: #{$tooltipsZ + 1};
z-index: $zindex3 + 1;
}
.centeredVideoLabel {
bottom: 45%;
border-radius: 2px;
display: none;
padding: 10px;
transform: translate(-50%, 0);
z-index: $centeredVideoLabelZ;
&.moveToCorner {
bottom: auto;
transform: none;
-webkit-transition: all 2s 2s linear;
transition: all 2s 2s linear;
}
}
.moveToCorner {
.large-video-labels {
display: flex;
position: absolute;
top: 30px;
right: 30px;
transition: right 0.5s;
z-index: $zindex3;
.circular-label {
color: white;
font-family: -apple-system, BlinkMacSystemFont, $baseFontFamily;
font-weight: bold;
margin-left: 8px;
opacity: 0.8;
}
.circular-label {
background: #B8C7E0;
}
.circular-label.file {
background: #FF5630;
}
.circular-label.stream {
background: #0065FF;
}
.recording-label.center-message {
background: $videoStateIndicatorBackground;
bottom: 50%;
display: block;
left: 50%;
padding: 10px;
position: fixed;
transform: translate(-50%, -50%);
z-index: $centeredVideoLabelZ;
}
}
.moveToCorner + .moveToCorner {
right: 80px;
}
.circular-label {
background: $videoStateIndicatorBackground;
border-radius: 50%;
box-sizing: border-box;
cursor: default;
font-size: 13px;
height: $videoStateIndicatorSize;
line-height: $videoStateIndicatorSize;
text-align: center;
min-width: $videoStateIndicatorSize;
}

View File

@@ -11,9 +11,16 @@
}
#reloadProgressBar {
width: 180px;
background: #e9e9e9;
border-radius: 3px;
height: 5px;
margin: 5px auto;
> .aui-progress-indicator-value {
overflow: hidden;
width: 180px;
.progress-indicator-fill {
background: $reloadProgressBarBg;
height: 100%;
transition: width .5s;
}
}

View File

@@ -14,11 +14,11 @@ $sliderThumbBackground: #3572b0;
/**
* Buttons
*/
$buttonBackground: #f5f5f5;
$buttonHoverBackground: #e9e9e9;
$buttonBorder: #ccc;
$buttonHoverBorder: #999;
$buttonColor: #333;
$buttonBackground: #44A5FF;
$buttonHoverBackground: #2c4062;
$buttonBorder: transparent;
$buttonHoverBorder: transparent;
$buttonColor: #eceef1;
$buttonLightBackground: #f5f5f5;
$buttonLightHoverBackground: #e9e9e9;
@@ -47,10 +47,10 @@ $reloadProgressBarBg: #0074E0;
/**
* Dialog colors
**/
$auiDialogColor: #333;
$auiDialogBg: #f5f5f5;
$auiDialogContentBg: $baseLight;
$auiBorderColor: #ccc;
$auiDialogColor: #eceef1;
$auiDialogBg: #253858;
$auiDialogContentBg: #344563;
$auiBorderColor: #253858;
$dialogTitleFontWeight: 400;
$dialogErrorText: #344563;
@@ -58,7 +58,7 @@ $dialogErrorText: #344563;
* Inlay colors
**/
$inlayColorBg: lighten($defaultBackground, 20%);
$inlayBorderColor: lighten($auiDialogContentBg, 10%);
$inlayBorderColor: lighten($baseLight, 10%);
$inlayIconBg: #000;
$inlayIconColor: #fff;
$inlayFilmstripOnlyColor: #474747;

View File

@@ -1,3 +1 @@
@import 'no-mobile-app';
@import 'unsupported-desktop-browser';
@import 'unsupported-mobile-browser';

View File

@@ -1,69 +0,0 @@
.unsupported-mobile-browser {
background-color: #fff;
height: 100vh;
padding: 35px 0;
width: 100vw;
&__body {
color: $unsupportedBrowserTextColor;
margin: auto;
max-width: 40em;
text-align: center;
width: 75%;
a:active {
text-decoration: none;
}
}
&__text {
font-size: 1.8em;
line-height: em(29px, 21px);
margin-bottom: 0.65em;
&_small {
font-size: 1.5em;
margin-bottom: 1em;
margin-top: em(21, 18);
strong {
font-size: em(21, 18);
}
}
}
&__logo {
height: 108px;
width: 77px;
}
&__button {
border: 0;
height: 42px;
margin: 0 auto;
max-width: 300px;
width: 98%;
@include border-radius(8px);
background-color: $unsupportedBrowserButtonBgColor;
font-size: 1.5em;
font-weight: 300;
letter-spacing: 0.5px;
text-shadow: 0px 1px 2px $unsupportedBrowserTextColor;
// Disable standard button effects.
box-shadow: none;
outline: none;
&:active {
background-color: $unsupportedBrowserButtonBgColor;
}
&_primary {
background-color: $primaryUnsupportedBrowserButtonBgColor;
&:active {
background-color: $primaryUnsupportedBrowserButtonBgColor;
}
}
}
}

View File

@@ -50,17 +50,21 @@ case "$1" in
db_get jicofo/jicofo-authpassword
if [ -z "$RET" ] ; then
db_input critical jicofo/jicofo-authpassword || true
db_go
# if password is missing generate it, and store it
JICOFO_AUTH_PASSWORD=`head -c 8 /dev/urandom | tr '\0-\377' 'a-zA-Z0-9a-zA-Z0-9a-zA-Z0-9a-zA-Z0-9@@@@####'`
db_set jicofo/jicofo-authpassword "$JICOFO_AUTH_PASSWORD"
else
JICOFO_AUTH_PASSWORD="$RET"
fi
JICOFO_AUTH_PASSWORD="$RET"
db_get jicofo/jicofosecret
if [ -z "$RET" ] ; then
db_input critical jicofo/jicofosecret || true
db_go
# if secret is missing generate it, and store it
JICOFO_SECRET=`head -c 8 /dev/urandom | tr '\0-\377' 'a-zA-Z0-9a-zA-Z0-9a-zA-Z0-9a-zA-Z0-9@@@@####'`
db_set jicofo/jicofosecret "$JICOFO_SECRET"
else
JICOFO_SECRET="$RET"
fi
JICOFO_SECRET="$RET"
JICOFO_AUTH_DOMAIN="auth.$JVB_HOSTNAME"
@@ -88,6 +92,7 @@ case "$1" in
if [ ! -f $PROSODY_HOST_CONFIG ] && ! grep -q "VirtualHost \"$JVB_HOSTNAME\"" $PROSODY_CONFIG_OLD; then
PROSODY_CONFIG_PRESENT="false"
mkdir -p /etc/prosody/conf.avail/
mkdir -p /etc/prosody/conf.d/
cp /usr/share/doc/jitsi-meet-prosody/prosody.cfg.lua-jvb.example $PROSODY_HOST_CONFIG
sed -i "s/jitmeet.example.com/$JVB_HOSTNAME/g" $PROSODY_HOST_CONFIG
sed -i "s/jitmeetSecret/$JVB_SECRET/g" $PROSODY_HOST_CONFIG
@@ -112,23 +117,18 @@ case "$1" in
fi
if [ ! -f /var/lib/prosody/$JVB_HOSTNAME.crt ]; then
HOST="$( (hostname -s; echo localhost) | head -n 1)"
DOMAIN="$( (hostname -d; echo localdomain) | head -n 1)"
openssl req -new -newkey rsa:4096 -days 365 -nodes -x509 -subj \
"/O=$DOMAIN/OU=$HOST/CN=$JVB_HOSTNAME/emailAddress=webmaster@$HOST.$DOMAIN" \
-keyout /var/lib/prosody/$JVB_HOSTNAME.key \
-out /var/lib/prosody/$JVB_HOSTNAME.crt
# prosodyctl takes care for the permissions
# echo for using all default values
echo | prosodyctl cert generate $JVB_HOSTNAME
ln -sf /var/lib/prosody/$JVB_HOSTNAME.key /etc/prosody/certs/$JVB_HOSTNAME.key
ln -sf /var/lib/prosody/$JVB_HOSTNAME.crt /etc/prosody/certs/$JVB_HOSTNAME.crt
fi
if [ ! -f /var/lib/prosody/$JICOFO_AUTH_DOMAIN.crt ]; then
HOST="$( (hostname -s; echo localhost) | head -n 1)"
DOMAIN="$( (hostname -d; echo localdomain) | head -n 1)"
openssl req -new -newkey rsa:4096 -days 365 -nodes -x509 -subj \
"/O=$DOMAIN/OU=$HOST/CN=$JICOFO_AUTH_DOMAIN/emailAddress=webmaster@$HOST.$DOMAIN" \
-keyout /var/lib/prosody/$JICOFO_AUTH_DOMAIN.key \
-out /var/lib/prosody/$JICOFO_AUTH_DOMAIN.crt
# prosodyctl takes care for the permissions
# echo for using all default values
echo | prosodyctl cert generate $JICOFO_AUTH_DOMAIN
AUTH_KEY_FILE="/etc/prosody/certs/$JICOFO_AUTH_DOMAIN.key"
AUTH_CRT_FILE="/etc/prosody/certs/$JICOFO_AUTH_DOMAIN.crt"
@@ -137,7 +137,9 @@ case "$1" in
ln -sf /var/lib/prosody/$JICOFO_AUTH_DOMAIN.crt $AUTH_CRT_FILE
ln -sf /var/lib/prosody/$JICOFO_AUTH_DOMAIN.crt /usr/local/share/ca-certificates/$JICOFO_AUTH_DOMAIN.crt
update-ca-certificates
# we need to force updating certificates, in some cases java trust
# store not get re-generated with latest changes
update-ca-certificates -f
# don't fail on systems with custom config ($PROSODY_HOST_CONFIG is missing)
if [ -f $PROSODY_HOST_CONFIG ]; then

View File

@@ -35,6 +35,14 @@ case "$1" in
if [ -n "$RET" ]; then
rm -f /etc/prosody/conf.avail/$JVB_HOSTNAME.cfg.lua
rm -f /etc/prosody/conf.d/$JVB_HOSTNAME.cfg.lua
# clean up generated certificates
rm -f /etc/prosody/certs/$JVB_HOSTNAME.crt
rm -f /etc/prosody/certs/$JVB_HOSTNAME.key
rm -f /etc/prosody/certs/auth.$JVB_HOSTNAME.crt
rm -f /etc/prosody/certs/auth.$JVB_HOSTNAME.key
rm -rf /var/lib/prosody/auth.$JVB_HOSTNAME.*
rm -rf /var/lib/prosody/$JVB_HOSTNAME.*
fi
# Clear the debconf variable

View File

@@ -1,24 +0,0 @@
jitsi-meet for Debian
---------------------
The jitsi-meet package is built from the sources of Jitsi Meet.
Jitsi Meet is downloaded from https://github.com/jitsi/jitsi-meet and the git files are removed. you can recreate the source with 'git clone https://github.com/jitsi/jitsi-meet.git'.
Use something like the script below to update from Git
#!/bin/bash
VERSION=1.0.1
echo "*.min.js export-ignore" > .gitattributes
echo "jquery-2.1.1.* export-ignore" >> .gitattributes
echo "jquery-ui.js export-ignore" >> .gitattributes
echo ".gitignore export-ignore" >> .gitattributes
sed -i "s/1.0.1/$VERSION/g" debian/changelog
git archive --worktree-attributes --format tar --prefix jitsi-meet-$VERSION/ -o ../jitsi-meet_${VERSION}.orig.tar master
tar --transform "s,^,jitsi-meet-$VERSION/," -rf ../jitsi-meet_${VERSION}.orig.tar
cd ..
bzip2 jitsi-meet_${VERSION}.orig.tar

View File

@@ -1,22 +0,0 @@
Description: Update the used js files for jquery to generic ones, to be able to use local system installed version (through symlinks).
Index: jitsi-meet/index.html
===================================================================
--- jitsi-meet.orig/index.html
+++ jitsi-meet/index.html
@@ -10,13 +10,13 @@
<meta itemprop="description" content="Join a WebRTC video conference powered by the Jitsi Videobridge"/>
<meta itemprop="image" content="/images/jitsilogo.png"/>
<script src="https://api.callstats.io/static/callstats.min.js"></script>
- <script src="libs/jquery-2.1.1.min.js"></script>
+ <script src="libs/jquery.min.js"></script>
<script src="https://cdn.socket.io/socket.io-1.2.0.js"></script>
<script src="https://cdnjs.cloudflare.com/ajax/libs/jsSHA/1.5.0/sha.js"></script>
<script src="config.js?v=11"></script><!-- adapt to your needs, i.e. set hosts and bosh path -->
<script src="libs/strophe/strophe.min.js?v=2"></script>
<script src="libs/strophe/strophe.disco.min.js?v=1"></script>
<script src="libs/strophe/strophe.caps.jsonly.min.js?v=1"></script>
- <script src="libs/jquery-ui.js"></script>
+ <script src="libs/jquery-ui.min.js"></script>
<script src="libs/tooltip.js?v=1"></script><!-- bootstrap tooltip lib -->
<script src="libs/popover.js?v=1"></script><!-- bootstrap tooltip lib -->
- <script src="libs/toastr.js?v=1"></script><!-- notifications lib -->

View File

@@ -1 +0,0 @@
jquery-package

View File

@@ -2,11 +2,12 @@
1. Go to https://icomoon.io/app/
2. Go to "Manage Projects" from the menu on the top left.
3. Use "Import project" and select <code>fonts/selection.json</code> from Jitsi Meet.
4. Import icons (e.g. svg files) using the "import items" button.
5. Go to "generate font" and make sure the identifiers for the new icons are correct.
6. Download the result in a zip file using the "download" button.
7. Copy <code>selection.json</code> and <code>fonts/jitsi.*</code> from the zip file to <code>fonts/</code> in Jitsi Meet
8. Copy the class for the new icon from <code>style.css</code> in the zip file to <code>css/font.css</code> in Jitsi Meet (do *not* copy the whole file)
4. Click "load".
5. Add the new icons using the "Add icons from library" button...
6. Go to "generate font" and make sure the identifiers for the new icons are correct.
7. Download the result in a zip file using the "download" button.
8. Copy <code>selection.json</code> and <code>fonts/jitsi.*</code> from the zip file to <code>fonts/</code> in Jitsi Meet
9. Copy the class for the new icon from <code>style.css</code> in the zip file to <code>css/_font.scss</code> in Jitsi Meet (do *not* copy the whole file)
10. Copy the <code>selection.json</code> file to <code>react/features/base/font-icons</code> overwriting <code>jitsi.json</code>
Sample commit: https://github.com/jitsi/jitsi-meet/commit/68bc819b89aec12364fcf07b81efa83a1900eed6

View File

@@ -27,6 +27,8 @@ Its constructor gets a number of options:
* **interfaceConfigOverwrite**: (optional) JS object with overrides for options defined in [interface_config.js].
* **noSSL**: (optional, defaults to true) Boolean indicating if the server should be contacted using HTTP or HTTPS.
* **jwt**: (optional) [JWT](https://jwt.io/) token.
* **onload**: (optional) handler for the iframe onload event.
* **invitees**: (optional) Array of objects containing information about new participants that will be invited in the call.
Example:
@@ -96,11 +98,6 @@ api.executeCommand('toggleFilmStrip')
api.executeCommand('toggleChat')
```
* **toggleContactList** - Hides / shows the contact list. No arguments are required.
```javascript
api.executeCommand('toggleContactList')
```
* **toggleShareScreen** - Starts / stops screen sharing. No arguments are required.
```javascript
api.executeCommand('toggleShareScreen')
@@ -140,18 +137,33 @@ The `event` parameter is a String object with the name of the event.
The `listener` parameter is a Function object with one argument that will be notified when the event occurs with data related to the event.
The following events are currently supported:
* **avatarChanged** - event notifications about avatar
changes. The listener will receive an object with the following structure:
```javascript
{
"id": id, // the id of the participant that changed his avatar.
"avatarURL": avatarURL // the new avatar URL.
}
```
* **audioAvailabilityChanged** - event notifications about audio availability status changes. The listener will receive an object with the following structure:
```javascript
{
"available": available // new available status - boolean
"available": available // new available status - boolean
}
```
* **audioMuteStatusChanged** - event notifications about audio mute status changes. The listener will receive an object with the following structure:
```javascript
{
"muted": muted // new muted status - boolean
"muted": muted // new muted status - boolean
}
```
* **screenSharingStatusChanged** - receives event notifications about turning on/off the local user screen sharing. The listener will receive object with the following structure:
```javascript
{
"on": on //whether screen sharing is on
}
```
@@ -159,9 +171,9 @@ The following events are currently supported:
messages. The listener will receive an object with the following structure:
```javascript
{
"from": from, // JID of the user that sent the message
"nick": nick, // the nickname of the user that sent the message
"message": txt // the text of the message
"from": from, // The id of the user that sent the message
"nick": nick, // the nickname of the user that sent the message
"message": txt // the text of the message
}
```
@@ -169,58 +181,62 @@ messages. The listener will receive an object with the following structure:
messages. The listener will receive an object with the following structure:
```javascript
{
"message": txt // the text of the message
"message": txt // the text of the message
}
```
* **displayNameChanged** - event notifications about display name
* **displayNameChange** - event notifications about display name
changes. The listener will receive an object with the following structure:
```javascript
{
"jid": jid, // the JID of the participant that changed his display name
"displayname": displayName // the new display name
"id": id, // the id of the participant that changed his display name
"displayname": displayName // the new display name
}
```
* **participantJoined** - event notifications about new participants who join the room. The listener will receive an object with the following structure:
```javascript
{
"jid": jid // the JID of the participant
"id": id, // the id of the participant
"displayName": displayName // the display name of the participant
}
```
* **participantLeft** - event notifications about participants that leave the room. The listener will receive an object with the following structure:
```javascript
{
"jid": jid // the JID of the participant
"id": id // the id of the participant
}
```
* **videoConferenceJoined** - event notifications fired when the local user has joined the video conference. The listener will receive an object with the following structure:
```javascript
{
"roomName": room // the room name of the conference
"roomName": room, // the room name of the conference
"id": id, // the id of the local participant
"displayName": displayName, // the display name of the local participant
"avatarURL": avatarURL // the avatar URL of the local participant
}
```
* **videoConferenceLeft** - event notifications fired when the local user has left the video conference. The listener will receive an object with the following structure:
```javascript
{
"roomName": room // the room name of the conference
"roomName": room // the room name of the conference
}
```
* **videoAvailabilityChanged** - event notifications about video availability status changes. The listener will receive an object with the following structure:
```javascript
{
"available": available // new available status - boolean
"available": available // new available status - boolean
}
```
* **videoMuteStatusChanged** - event notifications about video mute status changes. The listener will receive an object with the following structure:
```javascript
{
"muted": muted // new muted status - boolean
"muted": muted // new muted status - boolean
}
```
@@ -264,6 +280,16 @@ You can get the number of participants in the conference with the following API
var numberOfParticipants = api.getNumberOfParticipants();
```
You can get the avatar URL of a participant in the conference with the following API function:
```javascript
var avatarURL = api.getAvatarURL(participantId);
```
You can get the display name of a participant in the conference with the following API function:
```javascript
var displayName = api.getDisplayName(participantId);
```
You can get the iframe HTML element where Jitsi Meet is loaded with the following API function:
```javascript
var iframe = api.getIFrame();
@@ -271,32 +297,42 @@ var iframe = api.getIFrame();
You can check whether the audio is muted with the following API function:
```javascript
isAudioMuted().then(function(muted) {
api.isAudioMuted().then(function(muted) {
...
});
```
You can check whether the video is muted with the following API function:
```javascript
isVideoMuted().then(function(muted) {
api.isVideoMuted().then(function(muted) {
...
});
```
You can check whether the audio is available with the following API function:
```javascript
isAudioAvailable().then(function(available) {
api.isAudioAvailable().then(function(available) {
...
});
```
You can check whether the video is available with the following API function:
```javascript
isVideoAvailable().then(function(available) {
api.isVideoAvailable().then(function(available) {
...
});
```
You can invite new participants to the call with the following API function:
```javascript
api.invite([{...}, {...}, {...}]).then(function() {
// success
}).catch(function() {
// failure
});
```
**NOTE: The format of the invitees in the array depends on the invite service used for the deployment.**
You can remove the embedded Jitsi Meet Conference with the following API function:
```javascript
api.dispose()

View File

@@ -45,7 +45,7 @@ modules_enabled = {
-- Not essential, but recommended
"private"; -- Private XML storage (for room bookmarks, etc.)
"vcard"; -- Allow users to set vCards
-- These are commented by default as they have a performance impact
--"privacy"; -- Support privacy lists
"compression"; -- Stream compression (requires the lua-zlib package installed)
@@ -181,6 +181,13 @@ VirtualHost "jitsi.example.com"
c2s_require_encryption = false
VirtualHost "auth.jitsi.example.com"
ssl = {
key = "/var/lib/prosody/auth.jitsi.example.com.key";
certificate = "/var/lib/prosody/auth.jitsi.example.com.crt";
}
authentication = "internal_plain"
------ Components ------
-- You can specify components to add hosts that provide special services,
-- like multi-user conferences, and transports.

View File

@@ -1,5 +1,10 @@
# Server Installation for Jitsi Meet
:warning: **WARNING:** Manual installation is not recommended. We recommend following the [quick-install](https://github.com/jitsi/jitsi-meet/blob/master/doc/quick-install.md) document. The current document describes the steps that are needed to install a working deployment, but steps are easy to mess up, and the debian packages are more up-to-date, where this document sometimes is not updated to latest changes.
This describes configuring a server `jitsi.example.com` running Debian or a Debian Derivative. You will need to
change references to that to match your host, and generate some passwords for
`YOURSECRET1`, `YOURSECRET2` and `YOURSECRET3`.
@@ -60,6 +65,10 @@ VirtualHost "jitsi.example.com"
- add domain with authentication for conference focus user:
```
VirtualHost "auth.jitsi.example.com"
ssl = {
key = "/var/lib/prosody/auth.jitsi.example.com.key";
certificate = "/var/lib/prosody/auth.jitsi.example.com.crt";
}
authentication = "internal_plain"
```
- add focus user to server admins:
@@ -83,8 +92,16 @@ ln -s /etc/prosody/conf.avail/jitsi.example.com.cfg.lua /etc/prosody/conf.d/jits
Generate certs for the domain:
```sh
prosodyctl cert generate jitsi.example.com
prosodyctl cert generate auth.jitsi.example.com
```
Add auth.jitsi.example.com to the trusted certificates on the local machine:
```sh
ln -sf /var/lib/prosody/auth.jitsi.example.com.crt /usr/local/share/ca-certificates/auth.jitsi.example.com.crt
update-ca-certificates -f
```
Note that the `-f` flag is necessary if there are symlinks left from a previous installation.
Create conference focus user:
```sh
prosodyctl register focus auth.jitsi.example.com YOURSECRET3

View File

@@ -20,6 +20,14 @@ wget -qO - https://download.jitsi.org/jitsi-key.gpg.key | apt-key add -
apt-get update
```
(If you get an error:
E: The method driver /usr/lib/apt/methods/https could not be found.
run:
```sh
apt-get install apt-transport-https
```
)
### Install Jitsi Meet
Note : Something to consider before installation is how you're planning to serve Jitsi Meet. The installer will check if Nginx or Apache is present (with this order) and configure a virtualhost within the web server it finds to serve Jitsi Meet. If none of the above is found it then configures itself to be served via jetty. So if for example you are planning on deploying Jitsi Meet with a web server, you have to make sure to install the server **before** installing jitsi-meet.
@@ -84,7 +92,7 @@ Enjoy!
## Uninstall
```sh
apt-get purge jigasi jitsi-meet jitsi-meet-web-config jitsi-meet-web jicofo jitsi-videobridge
apt-get purge jigasi jitsi-meet jitsi-meet-web-config jitsi-meet-prosody jitsi-meet-web jicofo jitsi-videobridge
```
Sometimes the following packages will fail to uninstall properly:

57
doc/sipgw-config.md Normal file
View File

@@ -0,0 +1,57 @@
# Configuring sipgw jibri with jitsi-meet
This document describes how you can configure jitsi-meet to use sipgw jibri and enable rooms in 'Add people dialog'
You will need a working deployment of jibri configured to use a regular sip video device, for more info check out the [jibri documentation](https://github.com/jitsi/jibri/blob/master/README.md).
This feature is available for non-guests of the system, so this relies on setting in config.js ``enableUserRolesBasedOnToken: true`` and providing a jwt token when accessing the conference.
* Jicofo configuration:
edit /etc/jitsi/jicofo/sip-communicator.properties (or similar), set the appropriate MUC to look for the Jibri Controllers. This should be the same MUC as is referenced in jibri's config.json file. Restart Jicofo after setting this property.
```
org.jitsi.jicofo.jibri.SIP_BREWERY=TheSipBrewery@conference.yourdomain.com
```
* Jitsi Meet configuration:
- config.js: add
```
enableUserRolesBasedOnToken: true,
peopleSearchQueryTypes: ['conferenceRooms'],
peopleSearchUrl: 'https://api.yourdomain.com/testpath/searchpeople',
```
- interface_config.js:
```
ADD_PEOPLE_APP_NAME: 'Jitsi'
```
The combination of the above settings and providing a jwt token will enable a button under invite option which will show the dialog 'Add people'.
## People search service
When searching in the dialog, a request for results is made to the `peopleSearchUrl` service.
The request is in the following format:
```
https://api.yourdomain.com/testpath/searchpeople?query=testroomname&queryTypes=[%22conferenceRooms%22]&jwt=somejwt
```
The parameters are:
- query - The text entered by the user.
- queryTypes - What type of results we want people, rooms, conferenceRooms. This is the value from config.js `peopleSearchQueryTypes`
- jwt - The token used by the user to access the conference.
The response of the service is a json in the following format:
```
[
{
"id": "address@sip.domain.com",
"name": "Some room name",
"type": "videosipgw"
},
{
"id": "address2@sip.domain.com",
"name": "Some room name2",
"type": "videosipgw"
}
]
```
Type should be `videosipgw`, `name` is the name shown to the user and `id` is the sip address to be called by the sipgw jibri.

File diff suppressed because it is too large Load Diff

View File

@@ -1,8 +1,5 @@
// flow-typed signature: 4e93c65cedbfbf7f1ab3fe4e800943d3
// flow-typed version: 9092387fd2/react-redux_v5.x.x/flow_>=v0.53.x <=v0.53.x
// flow-typed signature: 8db7b853f57c51094bf0ab8b2650fd9c
// flow-typed version: ab8db5f14d/react-redux_v5.x.x/flow_>=v0.30.x
// flow-typed signature: 59b0c4be0e1408f21e2446be96c79804
// flow-typed version: 9092387fd2/react-redux_v5.x.x/flow_>=v0.54.x
import type { Dispatch, Store } from "redux";
@@ -34,6 +31,22 @@ declare module "react-redux" {
declare type Context = { store: Store<*, *> };
declare type ComponentWithDefaultProps<DP: {}, P: {}, CP: P> = Class<
React$Component<CP>
> & { defaultProps: DP };
declare class ConnectedComponentWithDefaultProps<
OP,
DP,
CP
> extends React$Component<OP> {
static defaultProps: DP, // <= workaround for https://github.com/facebook/flow/issues/4644
static WrappedComponent: Class<React$Component<CP>>,
getWrappedInstance(): React$Component<CP>,
props: OP,
state: void
}
declare class ConnectedComponent<OP, P> extends React$Component<OP> {
static WrappedComponent: Class<React$Component<P>>,
getWrappedInstance(): React$Component<P>,
@@ -41,13 +54,18 @@ declare module "react-redux" {
state: void
}
declare type ConnectedComponentWithDefaultPropsClass<OP, DP, CP> = Class<
ConnectedComponentWithDefaultProps<OP, DP, CP>
>;
declare type ConnectedComponentClass<OP, P> = Class<
ConnectedComponent<OP, P>
>;
declare type Connector<OP, P> = (
component: React$ComponentType<P>
) => ConnectedComponentClass<OP, P>;
declare type Connector<OP, P> = (<DP: {}, CP: {}>(
component: ComponentWithDefaultProps<DP, P, CP>
) => ConnectedComponentWithDefaultPropsClass<OP, DP, CP>) &
((component: React$ComponentType<P>) => ConnectedComponentClass<OP, P>);
declare class Provider<S, A> extends React$Component<{
store: Store<S, A>,
@@ -77,12 +95,12 @@ declare module "react-redux" {
options: ConnectOptions
): Connector<OP, $Supertype<{ dispatch: Dispatch<A> } & OP>>;
declare function connect<S, A, OP, SP>(
mapStateToProps: MapStateToProps<S, OP, SP>,
mapDispatchToProps: Null,
mergeProps: Null,
options?: ConnectOptions
): Connector<OP, $Supertype<SP & { dispatch: Dispatch<A> } & OP>>;
// declare function connect<S, A, OP, SP>(
// mapStateToProps: MapStateToProps<S, OP, SP>,
// mapDispatchToProps: Null,
// mergeProps: Null,
// options?: ConnectOptions
// ): Connector<OP, $Supertype<SP & { dispatch: Dispatch<A> } & OP>>;
declare function connect<A, OP, DP>(
mapStateToProps: Null,
@@ -93,7 +111,7 @@ declare module "react-redux" {
declare function connect<S, A, OP, SP, DP>(
mapStateToProps: MapStateToProps<S, OP, SP>,
mapDispatchToProps: MapDispatchToProps<A, OP, DP>,
mapDispatchToProps: MapDispatchToProps<A, OP, DP> | Null,
mergeProps: Null,
options?: ConnectOptions
): Connector<OP, $Supertype<SP & DP & OP>>;

View File

@@ -1,5 +1,5 @@
// flow-typed signature: 33b83b6284653250e74578cf4dbe6124
// flow-typed version: e282e4128f/redux_v3.x.x/flow_>=v0.33.x
// flow-typed signature: ec7daead5cb4fec5ab25fedbedef29e8
// flow-typed version: 2c04631d20/redux_v3.x.x/flow_>=v0.55.x
declare module 'redux' {
@@ -55,55 +55,5 @@ declare module 'redux' {
declare export function combineReducers<O: Object, A>(reducers: O): CombinedReducer<$ObjMap<O, <S>(r: Reducer<S, any>) => S>, A>;
declare export function compose<A, B>(ab: (a: A) => B): (a: A) => B
declare export function compose<A, B, C>(
bc: (b: B) => C,
ab: (a: A) => B
): (a: A) => C
declare export function compose<A, B, C, D>(
cd: (c: C) => D,
bc: (b: B) => C,
ab: (a: A) => B
): (a: A) => D
declare export function compose<A, B, C, D, E>(
de: (d: D) => E,
cd: (c: C) => D,
bc: (b: B) => C,
ab: (a: A) => B
): (a: A) => E
declare export function compose<A, B, C, D, E, F>(
ef: (e: E) => F,
de: (d: D) => E,
cd: (c: C) => D,
bc: (b: B) => C,
ab: (a: A) => B
): (a: A) => F
declare export function compose<A, B, C, D, E, F, G>(
fg: (f: F) => G,
ef: (e: E) => F,
de: (d: D) => E,
cd: (c: C) => D,
bc: (b: B) => C,
ab: (a: A) => B
): (a: A) => G
declare export function compose<A, B, C, D, E, F, G, H>(
gh: (g: G) => H,
fg: (f: F) => G,
ef: (e: E) => F,
de: (d: D) => E,
cd: (c: C) => D,
bc: (b: B) => C,
ab: (a: A) => B
): (a: A) => H
declare export function compose<A, B, C, D, E, F, G, H, I>(
hi: (h: H) => I,
gh: (g: G) => H,
fg: (f: F) => G,
ef: (e: E) => F,
de: (d: D) => E,
cd: (c: C) => D,
bc: (b: B) => C,
ab: (a: A) => B
): (a: A) => I
}
declare export var compose: $Compose;
}

Binary file not shown.

View File

@@ -11,11 +11,21 @@
<glyph unicode="&#xe145;" glyph-name="add" d="M810 470h-256v-256h-84v256h-256v84h256v256h84v-256h256v-84z" />
<glyph unicode="&#xe1aa;" glyph-name="bluetooth" d="M550 328l-80 82v-162zM470 776v-162l80 82zM670 696l-184-184 184-184-244-242h-42v324l-196-196-60 60 238 238-238 238 60 60 196-196v324h42zM834 738c40-64 62-142 62-222 0-84-24-160-66-226l-50 50c26 52 42 110 42 172s-16 120-42 172zM608 512l98 98c12-30 20-64 20-98s-8-70-20-100z" />
<glyph unicode="&#xe310;" glyph-name="headset" d="M512 982c212 0 384-172 384-384v-300c0-70-58-128-128-128h-128v342h170v86c0 166-132 298-298 298s-298-132-298-298v-86h170v-342h-128c-70 0-128 58-128 128v300c0 212 172 384 384 384z" />
<glyph unicode="&#xe408;" glyph-name="navigate_before" d="M658 708l-196-196 196-196-60-60-256 256 256 256z" />
<glyph unicode="&#xe409;" glyph-name="navigate_next" d="M426 768l256-256-256-256-60 60 196 196-196 196z" />
<glyph unicode="&#xe425;" glyph-name="timer" d="M512 170c166 0 298 134 298 300s-132 298-298 298-298-132-298-298 132-300 298-300zM812 708c52-66 84-148 84-238 0-212-172-384-384-384s-384 172-384 384 172 384 384 384c90 0 174-34 240-86l60 62c22-18 42-38 60-60zM470 426v256h84v-256h-84zM640 982v-86h-256v86h256z" />
<glyph unicode="&#xe5c4;" glyph-name="arrow_back" d="M854 554v-84h-520l238-240-60-60-342 342 342 342 60-60-238-240h520z" />
<glyph unicode="&#xe5d2;" glyph-name="menu" d="M128 768h768v-86h-768v86zM128 470v84h768v-84h-768zM128 256v86h768v-86h-768z" />
<glyph unicode="&#xe5d4;" glyph-name="thumb-menu" d="M512 342c46 0 86-40 86-86s-40-86-86-86-86 40-86 86 40 86 86 86zM512 598c46 0 86-40 86-86s-40-86-86-86-86 40-86 86 40 86 86 86zM512 682c-46 0-86 40-86 86s40 86 86 86 86-40 86-86-40-86-86-86z" />
<glyph unicode="&#xe603;" glyph-name="presentation" horiz-adv-x="1088" d="M952.495 1019.065h-818.689c-72.81 0-132.183-60.63-132.183-135.162v-750.719c0-74.473 59.372-135.101 132.183-135.101h818.686c72.936 0 132.314 60.625 132.314 135.101v750.722c0.003 74.532-59.378 135.159-132.311 135.159zM946.346 139.651h-806.14v737.822h806.015l0.126-737.822zM685.753 738.544h216.911v-566.758h-216.911v566.758zM428.672 610.002h216.911v-438.216h-216.911v438.216zM172.339 481.46h216.161v-309.677h-216.161v309.677z" />
<glyph unicode="&#xe613;" glyph-name="recDisable" horiz-adv-x="1140" d="M1123.444 1003.015c-23.593 26.481-64.131 28.989-90.74 5.395l-1008.269-893.436c-26.609-23.468-28.991-64.131-5.46-90.676 12.674-14.306 30.308-21.649 48.126-21.649 15.123 0 30.372 5.401 42.544 16.195l130.045 115.22c90.743-81.844 210.569-132.165 342.473-132.101 282.816 0.061 510.913 227.969 511.287 510.972 0.126 109.934-34.682 211.367-93.499 294.72l118.088 104.625c26.483 23.526 28.997 64.129 5.404 90.735zM944.422 513.818c0.128-200.922-161.896-363.201-362.509-362.952-87.56 0.123-167.573 31.151-230.061 82.569l331.277 293.509v-73.176c1.071-60.993 32.696-92.18 94.944-93.692 61.997 1.512 93.686 32.763 95.131 93.756v41.096h-72.227v-47.499c0.251-4.642-0.564-10.607-2.511-17.949-1.25-3.261-3.448-6.020-6.525-8.093-3.197-2.572-7.845-3.828-13.868-3.828-10.543 0.31-17.132 4.268-19.827 11.921-1.068 3.512-1.947 6.905-2.508 10.163-0.254 2.887-0.377 5.532-0.377 7.786v143.511l42.477 37.634c0.215-0.432 0.452-0.851 0.63-1.303 1.947-6.467 2.762-12.799 2.511-19.076v-36.772h72.227v30.121c-0.246 31.245-9.086 54.699-26.363 70.447l40.711 36.069c35.787-56.055 56.803-122.585 56.867-194.244zM239.795 395.47c-12.613 37.023-19.827 76.557-19.827 117.913-0.19 200.236 161.584 362.009 361.945 362.135 56.853 0 110.313-13.302 158.133-36.398l117.846 104.421c-79.444 50.952-173.758 80.817-275.292 80.948-283.377 0.181-511.354-227.729-511.789-511.675-0.126-79.567 18.636-154.679 51.137-221.882l117.848 104.538zM388.576 690.020h-97.514v-249.057l72.23 64.070v0.689h0.815l117.72 104.418c0 0.564 0.123 0.94 0.123 1.509 0.753 53.898-30.369 80.069-93.374 78.37zM405.959 625.517c1.942-2.767 3.074-6.469 3.323-11.112 0.312-4.452 0.438-9.6 0.438-15.246 0.251-10.916-0.689-19.83-2.949-26.985-2.952-7.594-10.983-11.357-24.159-11.357h-19.325v74.043h15.31c7.842 0 13.865-0.683 18.072-2.19 4.397-1.573 7.468-3.953 9.29-7.153z" />
<glyph unicode="&#xe614;" glyph-name="recEnable" horiz-adv-x="1142" d="M581.278 1025.708c284.857-0.19 514.807-230.517 514.427-514.997-0.378-285.047-230.073-514.553-514.869-514.615-284.541-0.062-515.311 230.517-514.933 514.422 0.439 285.936 230.009 515.439 515.375 515.19zM580.579 875.756c-201.764-0.123-364.666-163.032-364.478-364.663 0-202.018 162.524-364.735 364.478-364.984 202.018-0.316 365.174 163.030 365.048 365.423-0.252 201.767-163.156 364.35-365.048 364.224zM287.698 688.907h98.196c63.442 1.767 94.785-24.518 94.027-78.863 0.254-19.081-2.211-34.882-7.456-47.521-6.005-12.508-18.706-21.988-38.167-28.181v-0.819c28.373-6.259 43.031-23.573 43.981-51.946v-57.689c0-11.247 0.254-22.813 0.758-34.756 0.819-12.005 3.033-20.979 6.696-27.043h-71.846c-3.727 6.064-6.128 15.038-7.14 27.043-1.012 11.943-1.454 23.509-1.138 34.756v52.321c0 9.603-2.214 16.553-6.573 20.979-4.675 4.107-12.701 6.19-24.012 6.19h-14.599v-141.291h-72.73v326.82zM360.428 558.861h19.463c13.271 0 21.359 3.794 24.331 11.375 2.276 7.204 3.221 16.304 2.969 27.171 0 5.815-0.126 10.867-0.442 15.418-0.252 4.675-1.392 8.404-3.352 11.247-1.831 3.157-4.926 5.561-9.352 7.14-4.233 1.454-10.299 2.211-18.2 2.211h-15.418v-74.564zM498.372 688.907h162.082v-62.687h-89.35v-65.587h78.103v-62.685h-78.103v-73.11h92.822v-62.749h-165.557v326.818zM682.507 599.999c0.316 31.782 9.416 55.542 27.425 71.407 17.44 15.29 40.185 22.936 68.181 22.936 28.247 0 51.119-7.646 68.623-23 17.82-15.798 26.92-39.623 27.171-71.407v-30.333h-72.73v37.031c0.254 6.192-0.57 12.639-2.527 19.209-1.264 3.157-3.475 5.938-6.573 8.214-3.221 1.515-7.898 2.404-13.964 2.404-10.615-0.316-17.249-3.855-19.967-10.618-2.211-6.573-3.223-13.017-2.907-19.209v-161.956c0-2.273 0.126-4.865 0.38-7.772 0.568-3.411 1.454-6.824 2.527-10.233 2.717-7.775 9.352-11.756 19.967-12.007 6.067 0 10.744 1.261 13.964 3.791 3.098 2.15 5.309 4.867 6.573 8.216 1.96 7.33 2.782 13.33 2.527 18.007v47.837h72.73v-41.328c-1.451-61.547-33.364-93.015-95.794-94.469-62.685 1.454-94.53 32.922-95.607 94.343v148.937z" />
<glyph unicode="&#xe616;" glyph-name="event_note" d="M598 426v-84h-300v84h300zM810 214v468h-596v-468h596zM810 896c46 0 86-40 86-86v-596c0-46-40-86-86-86h-596c-48 0-86 40-86 86v596c0 46 38 86 86 86h42v86h86v-86h340v86h86v-86h42zM726 598v-86h-428v86h428z" />
<glyph unicode="&#xe61d;" glyph-name="phone-talk" d="M640 512c0 70-58 128-128 128v86c118 0 214-96 214-214h-86zM810 512c0 166-132 298-298 298v86c212 0 384-172 384-384h-86zM854 362c24 0 42-18 42-42v-150c0-24-18-42-42-42-400 0-726 326-726 726 0 24 18 42 42 42h150c24 0 42-18 42-42 0-54 8-104 24-152 4-14 2-32-10-44l-94-94c62-122 162-220 282-282l94 94c12 12 30 14 44 10 48-16 98-24 152-24z" />
<glyph unicode="&#xe80b;" glyph-name="public" d="M764 282c56 60 90 142 90 230 0 142-88 266-214 316v-18c0-46-40-84-86-84h-84v-86c0-24-20-42-44-42h-84v-86h256c24 0 42-18 42-42v-128h42c38 0 70-26 82-60zM470 174v82c-46 0-86 40-86 86v42l-204 204c-6-24-10-50-10-76 0-174 132-318 300-338zM512 938c236 0 426-190 426-426s-190-426-426-426-426 190-426 426 190 426 426 426z" />
<glyph unicode="&#xe89e;" glyph-name="open_in_new" d="M598 896h298v-298h-86v152l-418-418-60 60 418 418h-152v86zM810 214v298h86v-298c0-46-40-86-86-86h-596c-48 0-86 40-86 86v596c0 46 38 86 86 86h298v-86h-298v-596h596z" />
<glyph unicode="&#xe8b3;" glyph-name="restore" d="M512 682h64v-180l150-90-32-52-182 110v212zM554 896c212 0 384-172 384-384s-172-384-384-384c-106 0-200 42-270 112l60 62c54-54 128-88 210-88 166 0 300 132 300 298s-134 298-300 298-298-132-298-298h128l-172-172-4 6-166 166h128c0 212 172 384 384 384z" />
<glyph unicode="&#xe900;" glyph-name="AUD" d="M512 0c-282.77 0-512 229.23-512 512s229.23 512 512 512c282.77 0 512-229.23 512-512s-229.23-512-512-512zM308.25 387.3h57.225l-87.675 252.525h-62.125l-87.675-252.525h53.025l19.425 60.2h88.725l19.075-60.2zM461.9 639.825h-52.85v-165.375c0-56 41.125-93.625 105.7-93.625 64.75 0 105.875 37.625 105.875 93.625v165.375h-52.85v-159.95c0-31.85-19.075-52.15-53.025-52.15-33.775 0-52.85 20.3-52.85 52.15v159.95zM682.225 640v-252.7h99.4c75.6 0 118.475 46.025 118.475 128.1 0 79.1-43.4 124.6-118.475 124.6h-99.4zM735.075 594.85v-162.4h38.15c46.725 0 72.975 28.7 72.975 82.075 0 51.1-27.125 80.325-72.975 80.325h-38.15zM243.5 587.325l-31.675-99.050h66.15l-31.325 99.050h-3.15z" />
<glyph unicode="&#xe901;" glyph-name="avatar" d="M512 204c106 0 200 56 256 138-2 84-172 132-256 132-86 0-254-48-256-132 56-82 150-138 256-138zM512 810c-70 0-128-58-128-128s58-128 128-128 128 58 128 128-58 128-128 128zM512 938c236 0 426-190 426-426s-190-426-426-426-426 190-426 426 190 426 426 426z" />
<glyph unicode="&#xe902;" glyph-name="download" d="M726 470h-128v170h-172v-170h-128l214-214zM826 596c110-8 198-100 198-212 0-118-96-214-214-214h-554c-142 0-256 114-256 256 0 132 100 240 228 254 54 102 160 174 284 174 156 0 284-110 314-258z" />
<glyph unicode="&#xe903;" glyph-name="mic-camera-combined" d="M756.704 628.138l267.296 202.213v-635.075l-267.296 202.213v-191.923c0-12.085-11.296-21.863-25.216-21.863h-706.272c-13.92 0-25.216 9.777-25.216 21.863v612.25c0 12.085 11.296 21.863 25.216 21.863h706.272c13.92 0 25.216-9.777 25.216-21.863v-189.679zM371.338 376.228c47.817 0 86.529 40.232 86.529 89.811v184.835c0 49.651-38.713 89.883-86.529 89.883-47.788 0-86.515-40.232-86.515-89.883v-184.835c0-49.579 38.756-89.811 86.515-89.811v0zM356.754 314.070v-32.78h33.718v33.412c73.858 9.606 131.235 73.73 131.235 151.351v88.232h-30.636v-88.232c0-67.57-53.696-122.534-119.734-122.534-66.024 0-119.691 54.964-119.691 122.534v88.232h-30.636v-88.232c0-79.215 59.674-144.502 135.744-151.969v-0.014z" />
@@ -54,4 +64,10 @@
<glyph unicode="&#xe924;" glyph-name="visibility-off" d="M506 640h6c70 0 128-58 128-128v-8zM322 606c-14-28-24-60-24-94 0-118 96-214 214-214 34 0 66 10 94 24l-66 66c-8-2-18-4-28-4-70 0-128 58-128 128 0 10 2 20 4 28zM86 842l54 54 756-756-54-54c-47.968 47.365-96.266 94.401-144 142-58-24-120-36-186-36-214 0-396 132-470 320 34 84 90 156 160 212-39.017 38.983-77.307 78.693-116 118zM512 726c-28 0-54-6-78-16l-92 92c52 20 110 30 170 30 214 0 394-132 468-320-32-80-82-148-146-202l-124 124c10 24 16 50 16 78 0 118-96 214-214 214z" />
<glyph unicode="&#xe925;" glyph-name="dialpad" d="M512 982c46 0 86-40 86-86s-40-86-86-86-86 40-86 86 40 86 86 86zM512 726c46 0 86-40 86-86s-40-86-86-86-86 40-86 86 40 86 86 86zM768 726c46 0 86-40 86-86s-40-86-86-86-86 40-86 86 40 86 86 86zM768 470c46 0 86-40 86-86s-40-86-86-86-86 40-86 86 40 86 86 86zM512 470c46 0 86-40 86-86s-40-86-86-86-86 40-86 86 40 86 86 86zM768 810c-46 0-86 40-86 86s40 86 86 86 86-40 86-86-40-86-86-86zM256 470c46 0 86-40 86-86s-40-86-86-86-86 40-86 86 40 86 86 86zM256 726c46 0 86-40 86-86s-40-86-86-86-86 40-86 86 40 86 86 86zM256 982c46 0 86-40 86-86s-40-86-86-86-86 40-86 86 40 86 86 86zM512 214c46 0 86-40 86-86s-40-86-86-86-86 40-86 86 40 86 86 86z" />
<glyph unicode="&#xe926;" glyph-name="gsm-bars-black" d="M896 1024c70.692 0 128-57.308 128-128v-768c0-70.692-57.308-128-128-128s-128 57.308-128 128v768c0 70.692 57.308 128 128 128zM512 768c70.692 0 128-57.308 128-128v-512c0-70.692-57.308-128-128-128s-128 57.308-128 128v512c0 70.692 57.308 128 128 128zM128 384v0c70.692 0 128-57.308 128-128v-128c0-70.692-57.308-128-128-128s-128 57.308-128 128v128c0 70.692 57.308 128 128 128v0z" />
<glyph unicode="&#xe927;" glyph-name="HD" d="M512 0c-282.77 0-512 229.23-512 512s229.23 512 512 512c282.77 0 512-229.23 512-512s-229.23-512-512-512zM481.359 384v255.823h-54.273v-103.18h-116.813v103.18h-54.273v-255.823h54.273v106.903h116.813v-106.903h54.273zM544.258 640v-256h102.077c77.636 0 121.665 46.626 121.665 129.773 0 80.133-44.569 126.227-121.665 126.227h-102.077zM598.531 594.26v-164.521h39.177c47.983 0 74.94 29.075 74.94 83.147 0 51.767-27.855 81.374-74.94 81.374h-39.177z" />
<glyph unicode="&#xe928;" glyph-name="LD" d="M512 0c-282.77 0-512 229.23-512 512s229.23 512 512 512c282.77 0 512-229.23 512-512s-229.23-512-512-512zM472.4 433.325h-112.35v206.5h-52.85v-252.525h165.2v46.025zM520.35 640v-252.7h99.4c75.6 0 118.475 46.025 118.475 128.1 0 79.1-43.4 124.6-118.475 124.6h-99.4zM573.2 594.85v-162.4h38.15c46.725 0 72.975 28.7 72.975 82.075 0 51.1-27.125 80.325-72.975 80.325h-38.15z" />
<glyph unicode="&#xe929;" glyph-name="SD" d="M512 0c-282.77 0-512 229.23-512 512s229.23 512 512 512c282.77 0 512-229.23 512-512s-229.23-512-512-512zM281.6 451.175c1.925-47.075 40.95-76.65 101.15-76.65 63.35 0 102.375 31.15 102.375 82.075 0 39.2-21.875 61.075-72.625 71.75l-30.45 6.475c-29.575 6.3-41.65 15.225-41.65 30.8 0 19.25 17.5 31.5 43.925 31.5 25.55 0 44.1-13.3 46.55-33.25h49.7c-1.575 44.975-40.95 76.125-96.6 76.125-58.275 0-96.6-31.325-96.6-78.925 0-38.5 22.575-62.475 68.6-72.1l32.9-7c30.975-6.65 43.575-15.925 43.575-32.025 0-19.075-19.425-32.375-46.9-32.375-29.75 0-50.4 13.125-52.85 33.6h-51.1zM535 633.7v-252.7h99.4c75.6 0 118.475 46.025 118.475 128.1 0 79.1-43.4 124.6-118.475 124.6h-99.4zM587.85 588.55v-162.4h38.15c46.725 0 72.975 28.7 72.975 82.075 0 51.1-27.125 80.325-72.975 80.325h-38.15z" />
<glyph unicode="&#xe92a;" glyph-name="camera-take-picture" d="M725.333 512c0-117.821-95.513-213.333-213.333-213.333s-213.333 95.513-213.333 213.333c0 117.821 95.513 213.333 213.333 213.333s213.333-95.513 213.333-213.333zM512 256c141.385 0 256 114.615 256 256s-114.615 256-256 256v0c-141.385 0-256-114.615-256-256s114.615-256 256-256v0zM512 213.333c-164.949 0-298.667 133.718-298.667 298.667s133.718 298.667 298.667 298.667v0c164.949 0 298.667-133.718 298.667-298.667s-133.718-298.667-298.667-298.667v0z" />
<glyph unicode="&#xe92b;" glyph-name="rec" d="M512 0c-282.77 0-512 229.23-512 512s229.23 512 512 512c282.77 0 512-229.23 512-512s-229.23-512-512-512zM581.333 433.782h-110.595v59.233h104.338v40.332h-104.338v56.87h110.595v43.539h-161.665v-243.512h161.665v43.539zM738.771 384c58.849 0 101.802 36.282 106.029 88.933h-49.717c-4.904-26.832-26.888-44.045-56.143-44.045-38.556 0-62.4 31.895-62.4 83.196s23.844 83.027 62.231 83.027c29.086 0 51.239-18.394 56.143-46.407h49.717c-3.72 52.989-48.026 91.296-105.86 91.296-70.855 0-114.485-48.77-114.485-127.916 0-79.314 43.798-128.084 114.485-128.084zM230.27 478.502h41.769l45.489-88.258h57.834l-51.408 96.19c28.072 11.138 44.306 38.138 44.306 69.189 0 48.432-32.976 78.133-86.582 78.133h-102.478v-243.512h51.070v88.258zM230.27 592.58v-74.927h44.813c25.704 0 40.754 13.838 40.754 37.295 0 23.119-15.896 37.632-41.262 37.632h-44.306z" />
<glyph unicode="&#xe92c;" glyph-name="live" d="M512 0c-282.77 0-512 229.23-512 512s229.23 512 512 512c282.77 0 512-229.23 512-512s-229.23-512-512-512zM298.225 430.025h-112.35v206.5h-52.85v-252.525h165.2v46.025zM399.025 384v252.525h-52.85v-252.525h52.85zM591.525 384l84.175 252.525h-56.875l-56.35-193.025h-3.15l-57.4 193.025h-59.675l85.4-252.525h63.875zM886.050 429.15h-114.45v61.425h107.975v41.825h-107.975v58.975h114.45v45.15h-167.3v-252.525h167.3v45.15z" />
</font></defs></svg>

Before

Width:  |  Height:  |  Size: 18 KiB

After

Width:  |  Height:  |  Size: 24 KiB

Binary file not shown.

Binary file not shown.

File diff suppressed because it is too large Load Diff

BIN
images/calendar@2x.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 1.7 KiB

BIN
images/calendar@3x.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 2.4 KiB

View File

@@ -1,9 +0,0 @@
<svg xmlns="http://www.w3.org/2000/svg" height="480" width="640" viewBox="0 0 640 480">
<g stroke-width="1pt">
<path fill="#006" d="M0 0h640v480H0z"/>
<path d="M0 0v27.95L307.037 250h38.647v-27.95L38.647 0H0zm345.684 0v27.95L38.647 250H0v-27.95L307.037 0h38.647z" fill="#fff"/>
<path d="M144.035 0v250h57.614V0h-57.615zM0 83.333v83.333h345.684V83.333H0z" fill="#fff"/>
<path d="M0 100v50h345.684v-50H0zM155.558 0v250h34.568V0h-34.568zM0 250l115.228-83.334h25.765L25.765 250H0zM0 0l115.228 83.333H89.463L0 18.633V0zm204.69 83.333L319.92 0h25.764L230.456 83.333H204.69zM345.685 250l-115.228-83.334h25.765l89.464 64.7V250z" fill="#c00"/>
<path d="M299.762 392.523l-43.653 3.795 6.013 43.406-30.187-31.764-30.186 31.764 6.014-43.406-43.653-3.795 37.68-22.364-24.244-36.495 40.97 15.514 13.42-41.713 13.42 41.712 40.97-15.515-24.242 36.494m224.444 62.372l-10.537-15.854 17.81 6.742 5.824-18.125 5.825 18.126 17.807-6.742-10.537 15.854 16.37 9.718-18.965 1.65 2.616 18.85-13.116-13.793-13.117 13.794 2.616-18.85-18.964-1.65m16.368-291.815l-10.537-15.856 17.81 6.742 5.824-18.122 5.825 18.12 17.807-6.74-10.537 15.855 16.37 9.717-18.965 1.65 2.616 18.85-13.116-13.793-13.117 13.794 2.616-18.85-18.964-1.65m-89.418 104.883l-10.537-15.853 17.808 6.742 5.825-18.125 5.825 18.125 17.808-6.742-10.536 15.853 16.37 9.72-18.965 1.65 2.615 18.85-13.117-13.795-13.117 13.795 2.617-18.85-18.964-1.65m216.212-37.929l-10.558-15.854 17.822 6.742 5.782-18.125 5.854 18.125 17.772-6.742-10.508 15.854 16.362 9.718-18.97 1.65 2.608 18.85-13.118-13.793-13.117 13.793 2.61-18.85-18.936-1.65m-22.251 73.394l-10.367 6.425 2.914-11.84-9.316-7.863 12.165-.896 4.605-11.29 4.606 11.29 12.165.897-9.317 7.863 2.912 11.84" fill-rule="evenodd" fill="#fff"/>
</g>
</svg>

Before

Width:  |  Height:  |  Size: 1.7 KiB

Some files were not shown because too many files have changed in this diff Show More